Over a million developers have joined DZone.
{{announcement.body}}
{{announcement.title}}

IoV Series, Part 1: 6 Pain Points of Traditional Internet of Vehicles Architecture

DZone's Guide to

IoV Series, Part 1: 6 Pain Points of Traditional Internet of Vehicles Architecture

At the intersection of cloud and IoT, the rubber meets the road as developers tackle some very specific challenges.

· Cloud Zone ·
Free Resource

Learn how to migrate and modernize stateless applications and run them in a Kubernetes cluster.

In the past two years, the development of the Internet of Vehicles (IoV) technology has been widely publicized and actively promoted by governments, research institutes, and major Internet giants. IoV is mainly applied in two ways: before assembly and after assembly. In the pre-assembly stage, the vehicle is equipped with an IoV device before leaving the factory, which is dominated by the vehicle manufacturer. This may also include the collaboration between a vehicle manufacturer and an IoV solution provider, such as the collaboration between SAIC and Alibaba. In the post-assembly stage, typically the IoV device is connected to the onboard diagnostics (OBD) port of the vehicle. The IoV solution uses an intelligent terminal (that is, an IoV device) to collect all raw data from the CAN bus of the OBD port, diagnoses and analyzes the data, records driving information, resolves the data (various sensor values from the electronic control system), and outputs the data through the serial port for users to access, analyze, and use. The vehicle data collected by the IoV device is presented to the IoV mobile app.

Characteristics of the IoV Industry

First of all, let's roughly summarize the characteristics of the IoV industry:

  1. The number of monthly active IoV devices is large and they stay online for a long time. Today, vehicles are essential for people to travel. Once a vehicle is on the road, the IoV device goes online, collects and reports data to the IoV platform. The average time for a IoV device online is 3 hours per day, depending on the congestion of the city.
  2. The peaks of travel in the morning and evening are fixed. A regular feature of the IoV industry is that the peaks of travel in the morning and evening are concentrated. The morning peaks are concentrated between 6:00 am and 9:00 am, and the evening peaks are concentrated in the 3 hours from 5:00 pm to 8:00 pm. This results in a peak traffic flow of around 6 hours a day. How to deal with the morning and evening peaks at a lower cost is a realistic problem.
  3. The holiday peak traffic is difficult to predict. Due to the free policy of the expressway during the national legal holidays, more and more people are choosing to drive or travel. Therefore, whenever a holiday comes, it will inevitably lead to a surge in the number of IoV users, and the time and flow of the peak traffic are uncertain. How to accurately predict the peak travel time of each holiday is a problem.
  4. High concurrency, high capacity, and complex scenarios. The number of monthly active IoV devices is large. The peaks appear in the morning and evening, resulting in high concurrency. The IoV devices keeping online for an average of 3 hours per day produce a huge amount of data, which causes the data to be written is much more than that to be read during data collection. However, the data to be read is less than that to be written in group communication with social media, friend circles, and vehicle driving reports. The complex application scenarios have high requirements for application architecture.
  5. The speed of automotive technology updating is fast. Nowadays, automobile technology updating is getting faster and faster, more and more automobile manufacturers are emerging, and the frequency of new models released by manufacturers is getting higher and higher. IoV enterprises must maintain high attention to new technologies in the automobile industry, speed up version iteration, and improve R&D efficiency to quickly respond to changes in the automotive market and meet the market demand.

Increasing Cloud Adoption for IoV

Currently, startup companies choose in-house internet database connectors (IDCs) from the very start, with a small number of users and only a few servers. As their products become increasingly sophisticated, users surge to a million level in less than two years, and servers in the IDC reach a scale of hundreds of physical machines and thousands of virtual machines. But problems also increase. Researching and planning the next-generation application architecture and infrastructure is an urgent task. The new application architecture is expected to meet the requirements of surging users and explosive traffic, while ensuring pleasant user experience; the infrastructure must be highly reliable, stable, and secure while maintaining a low cost.

Traditional in-house IDC solutions are difficult to achieve this goal, unless at a very high cost. In contrast, cloud computing can resolve these problems from all aspects. Therefore, migration to cloud is the best choice. However, there are many cloud computing vendors, including Chinese companies and foreign companies. Choosing the most suitable cloud computing vendor can be a challenging process, but through our investigation and analysis, we felt that Alibaba Cloud was the best choice according to our business needs.

After deciding on Alibaba Cloud, the next step is to consider how to migrate to the cloud. This article series aims to share some of the details of the migration process.

Traditional IoV Architecture

Before migrating to the cloud, we must fully understand our business and application architecture. Then understand the features of cloud products to determine which products can be directly used and what adjustments our applications or architecture require. Let's analyze the smart IoV platform architecture.

Business Architecture

The following figure shows the company's business architecture. It consists of three major business platforms, the core of which is the IoV platform, followed by the capability resource platform and the third-party cooperation platform.

Image title


IoV platform: consists of the application layer, support layer, and physical layer. The application layer implements user registration, user login, navigation, vehicle friends, vehicle detection, track query, and other entertainment functions. These are the core functions of the app, followed by support layer functions, such as operations management systems, user management systems, vehicle management systems, and other auxiliary O&M systems and tools.

Capability resource platform: provides resources and capabilities for customers and partners as an open platform, for example, fleet services, data applications, and location services.

Third-party cooperation platform: provides insurances, violation inquiry, parking space searching, 4S shop services, and other functions by calling third-party platform interfaces.

Application Architecture

The following figure shows the application architecture, consisting of the client access layer, Server Load Balancer cluster, application server cluster, cache cluster, message queue (MQ) cluster, distributed service cluster, data storage cluster, and O&M control cluster.

2

Data Streams

A typical IoV system is data intensive and its success is highly dependent on how effective data can be collected and processed.

  1. Data Collection: The smart vehicle equipment collects driving data and reports the data to the platform through an IoT card (that is, SIM card). The platform converts the data into readable data through the protocol parsing service and stores the readable data and original data.
  2. Data Processing: After the parsed data is stored in MQ, application services at the back end start to process the data. For example, the trajectory service obtains trajectory data from MQ for analysis and processing, and generate users' driving trajectory; the fault detection service identifies vehicle faults by subscribing to vehicle sensor values in MQ for analysis.
  3. Data Analysis: Some driving data is finally stored in the database through the processing of each module, and specific scenarios are analyzed using big data. For example, the driving behavior analysis service analyzes a user's daily driving behaviors (for example, rapid acceleration, rapid deceleration, and sharp turn) to rate the user's driving.
  4. Data Display: After downloading and installing the mobile app, a user can log on to the app to view the vehicle location, track, fuel consumption, and failures and enjoy functions such as making friends and entertainment.

Technical Details of Application Architecture

Firewall

At the forefront of applications in traditional IDCs is a firewall, which provides access control and protects against common attacks. The defense capabilities are limited because the firewall is not advanced. During the company' rapid development, the firewall has been replaced twice, respectively, when the number of users reaches 100,000 and 1 million. Services are interrupted every time the firewall is replaced. This cause unpleasant user experience, but there is no way because there are not many users when the business starts and the number of users is 100,000 according to the initial system design. It takes about 1 year for the user scale to increase from 0 to 100,000. However, it takes only seven months to increase from 100,000 to 1 million. The firewall has to be replaced to support 5 million users, so as to meet the surging user demand. If things go on like this, you can imagine what will happen. First, hardware equipment is becoming expensive. After you invest hundreds of thousands, you may have to replace equipment within less than one year due to fast business growth, which is expensive and laborious. Secondly, firewalls are the entrance to all services. If a firewall fails, services will inevitably break down. Services are interrupted no matter whether you replace the firewall.

Server Load Balancer Cluster

The Layer-4 Server Load Balancer cluster uses the LVS server, which provides load balancing for protocol parsing and data processing at the back end. Because each protocol parsing service processes a maximum of only 10,000 vehicles per second, the LVS server is equipped with many data collection servers. This allows massive vehicles to be simultaneously online per second.

The Layer-7 Server Load Balancer cluster uses NGINX servers, which provides load balancing and reverse proxy for back-end web application servers. In addition, NGINX supports regular expressions and other features.

The bottleneck is the expansion of IDC network bandwidth. You need to apply for the expansion, which takes 1 to 2 days from completing the internal process to the operator process. This undermines fast expansion of network bandwidth, making it unable to cope with sudden traffic growth. It is a waste of resources if you purchase a lot of idle bandwidth for a long time. After all, high-quality network bandwidth resources are quite expensive in China. As the company's O&M personnel, how to help increase income and reduce expenditures and make every penny count is our responsibility, obligation, and more of an ability.

Application Server Cluster

All application servers use Centos7. The running environment is mainly Java or PHP. Node.js is also used.

Java: Centos7, JDK1.7, and Tomcat7

PHP: Centos7 and PHP5.6.11

Node.js: Centos7 and Node8.9.3

Currently, we use Java, PHP, and Python as application development languages and use Tomcat, NGINX, and Node.js as web environments. Application upgrades are released basically using scripts because application releasing is not highly automated. Applications are usually released and upgraded in the middle of the night, requiring a lot of overtime. Heavy repetitive O&M workload diminishes a sense of accomplishment. O&M engineers either solve problems or upgrade and release services most of the time. They do not have time to improve themselves. They become confused without orientation, which increases staff turnover. A vicious circle is inevitable if this problem fails to be solved.

Distributed Service Cluster

A distributed service cluster uses the Dubbo + ZooKeeper distributed service framework. The number of Zookeeper servers must be odd for election.

Alibaba Cloud Dubbo is an open source distributed service framework, which is also a popular Java distributed service framework. However, the lack of Dubbo monitoring software makes troubleshooting difficult. A robust link tracking and monitoring system improves distributed applications.

Cache Cluster

Cache clusters work in Redis 3.0 mode. 10 Redis cache clusters exist in the architecture. The memory of a cluster ranges from 60 GB to 300 GB. A cache server is typically a dedicated host acting as the memory, with low CPU overhead. As data persistence is demanding for the high disk I/O capability, Solid State Drives (SSDs) are recommended.

The biggest pain point with caching is O&M. Redis cluster failures are frequently caused by the disk I/O capability bottleneck, and Redis clusters need to be frequently resized online because of rapidly increasing users. In addition, Redis clusters must be operated and maintained manually, resulting in heavy workload and misoperation. Countless failures are caused by Redis clusters. The problem is also associated with a strong dependency of applications: the entire application crashes when Redis clusters fail. That is a disadvantage of application system design.

Message Queue (MQ) Cluster

Requests are congested when a huge number of requests are received concurrently. For example, a large volume of insert and update requests simultaneously reach the MySQL instance, resulting in massive row locks and table locks. The error "too many connections" may be caused by the accumulation of excessive requests. Requests in an MQ can be processed asynchronously so that the system workload is reduced. In this architecture, open source Kafka is used as MQ. It is a distributed messaging system based on Pub/Sub. Featuring high throughput, it supports real-time and offline data processing.

However, it has a serious pain point. As open source software, Kafka is associated with several previous failures. In Version 0.8.1, a bug exists in the topic deletion function. In Version 0.9, a bug exists in Kafka clients: when multiple partitions and consumers exist, a partition may be congested by rebalancing. Version 10 is different from Version 0.8 in the consumption mode so that we had to rebuild the consumption program. In summary, we have encountered too many failures caused by Kafka bugs. Small and medium-sized enterprises are unable to fix bugs of such software due to limited technical capabilities, which leaves them passive and helpless.

StreamCompute Cluster

StreamCompute uses Alibaba Cloud open source JStorm to process and analyze real-time data. In this architecture, two StreamCompute clusters are used. Each StreamCompute cluster has eight high-performance servers and two supervisor nodes (one active and one standby for high availability). StreamCompute is mainly used for real-time computing such as vehicle alarms and trip tracking.

Data Storage Cluster

A data storage cluster includes a database cluster and distributed file system.

A database cluster includes multiple databases, for example, MySQL cluster, MongoDB cluster, and Elasticsearch cluster.

MySQL Cluster

We currently have dozens of database clusters. Some clusters work in high-availability architecture where one master and two slaves exist; some clusters work in double-master architecture. MySQL databases are mainly used for business databases. With the rapid development of our business and the rapid growth of the user scale, we become more and more demanding for database performance. We have successively experienced high-end virtual machines (VMs), high-end physical machines, and then SSDs when the local I/O capability of physical machines could not meet our requirements any longer. However, what can we do when a single database server at the maximum configuration cannot meet us in the near future? What solutions should the database team learn about in advance, like Distributed Relational Database Service (DRDS)?

MongoDB Cluster

We currently have three MongoDB clusters, mainly used to store original data from vehicles and resolved data, such as vehicle status, ignition, alarms, and tracks. A replica set is used. It usually comprises three nodes. One serves as the master node, processing client requests. The others are slave nodes, copying data from the master node.

Elasticsearch Cluster

ElasticSearch is a Lucene-based search server. It provides a distributed multi-tenant full-text search engine based on the RESTful web interface. Developed based on Java, Elasticsearch is an open-source code service released under the Apache license terms and a popular enterprise-level search engine. In this architecture, the Elasticsearch cluster uses three nodes, all of which are candidates for the master node. The cluster is mainly used for track query, information retrieval, and log system.

Distributed Network File System (NFS)

As there are massive application pictures and user-uploaded pictures to be saved, we need a high-performance file storage system. We use a self-built distributed NFS.

However, the self-built distributed NFS is barely scalable because of our limited investment in hardware devices. In addition, downtime is required, which seriously affects business. The access rate decreases as the number of clients increases. As a pain point impairing user experience, the problem must be solved.

O&M Control Cluster

In complex system architecture and in scenarios where massive servers exist, we need appropriate O&M control software to improve the O&M efficiency.

Monitoring

The open source Zabbix monitoring system is used.

Code Management

GitLab is used for code hosting.

Bastion Host

The open source Jumpserver bastion host is used to audit operations by O&M engineers and improve the security of user login.

Log query and management: The open source ELK log system is used.

Continuous Integration

As an open source tool for continuous integration, Jenkins is used for continuous deployment, such as code building, automatic deployment, and automatic test.

Configuration Management System

Based on Java, it manages application configuration in centralized mode.

Although the current O&M system is standard, most O&M tools are open source services that can only meet part of function requirements. As O&M control requirements increase, we should be familiar with more and more open source services. As O&M management is inconsistent, O&M engineers usually should be familiar with many O&M systems, which makes it difficult for beginners.

Pain Points of Traditional IDC Architecture

As the user scale increases, more and more problems with this architecture are exposed.

Pain Point 1: O&M Is Insufficiently Automated, Resulting in Heavy and Redundant Workload

Most of O&M tasks are manually finished in script mode. O&M is insufficiently automated because, with the rapid development of our business, O&M engineers either upgrade applications or deal with system failures most of the time and do not have time to automate O&M. In addition, it is difficult to recruit O&M talents probably because of uncompetitive pay. In summary, we develop slowly in O&M automation due to various factors with a sign of a vicious cycle.

Pain Point 2: Without Auto Scaling Capabilities, We Have to Spend a Lot Dealing with Business Traffic Peaks

A feature of the Internet of Vehicles (IoV) industry is that the rate of online vehicles surges during morning and evening peak hours and holidays, and then the rate tends to be stable. Morning and evening peaks last for six hours, and the traffic is normal during the other 18 hours. The traffic during peak hours is usually three to five times the normal traffic. It usually takes several days to resize traditional IDC online so that it is impossible to deal with a sudden surge in traffic. To ensure the system stability and user experience, we have to multiply resources with resource utilization of less than 30%, resulting in a huge waste of resources.

Pain Point 3: O&M Tools Are Scattered, and O&M Is Complex and Tedious

Most of our O&M control software is open-source with many variants (for example, open source Jumpserver, Zabbix monitoring system, Jenkins for continuous integration, and Ansible for automatic O&M), for which you need to configure independent accounts. Therefore, it is inconvenient to manage too many accounts, and O&M engineers need to operate and be familiar with a variety of open source software. For example, the Zabbix monitoring system can deal with monitoring alarms when the scale of data is small. However, when the number of metrics surges as the number of servers increases, the performance of the database is inadequate, resulting in frequent alarm delay and more false alarms. Some custom monitoring requirements and metrics need to be separately developed. Therefore, the availability of various O&M tools directly results in complex and tedious O&M.

Pain Point 4: Hardware Devices Are Purchased in a Long Cycle with High Costs and Low Scalability

When our applications are launched in the early stage, our system is simply designed without sufficient horizontal scaling capabilities. When the business volume explodes, many resources cannot be promptly scaled, which results in system failures and impairs user experience. For example, we used the self-built NFS in the early stage to store pictures of user profiles, pictures of driver licenses, and pictures sent to WeChat Moments. We failed to invest enough resources for some reasons, resulting in a series of problems after a period of time, such as insufficient storage space, impaired read-write performance, and user access latency. The biggest problem is that the cycle of hardware device scaling is long. It usually takes 5-10 days from making a purchase request to implementing hardware scaling because of the process of purchase approval, logistics shipping, acceptance, and IDC mounting.

Pain Point 5: Infrastructure Is Unreliable with Frequent Failures

The underlying infrastructure of traditional IDC is usually self-constructed with many factors resulting in instability of underlying infrastructure. For example, enterprises attach little importance to investment in hardware and use cheap devices; engineers are incapable of building sufficiently stable infrastructure architecture; ISP network connectivity is unstable with no Border Gateway Protocol (BGP). In addition, our IDC encountered unexpected power-off three times in one year, resulting in a large-scale system breakdown. Therefore, inexplicable failures occur frequently because of unstable underlying infrastructure and cannot be promptly located. Unexpected problems occur at any time, haunting us with fear every day.

Pain Point 6: Without Adequate Security Protection Capabilities, the System Is Vulnerable to Attacks

With the rapid development of the company and the growth of the user scale, we are likely to be targeted by people with evil intent. One day at about 3:00pm, a large amount of DDoS attacks exploded, breaking down our firewall and system instantly. Our business crashed for several hours, but we could do nothing. Our poor security protection capabilities are also associated with costs: we cannot afford high-end firewalls or expensive bandwidth of ISPs.

Join us in exploring application and infrastructure changes required for running scalable, observable, and portable apps on Kubernetes.

Topics:
database ,architecture ,big data ,trends ,iot ,iov ,cloud

Published at DZone with permission of

Opinions expressed by DZone contributors are their own.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}