Over a million developers have joined DZone.

Akka Notes: Actor Messaging - 1

· IoT Zone

Access the survey results 'State of Industrial Internet Application Development' to learn about latest challenges, trends and opportunities with Industrial IoT, brought to you in partnership with GE Digital.

From the introductory first part of the Akka Notes, we saw a bird's eye view of Actors in the Akka Toolkit. In this second part of the Akka Notes, we'll look at the messaging part of Actors. As for the example, we would use the same Student-Teacher example that we discussed earlier.

In this first part of Actor Messaging, we'll create the Teacher Actor and instead of the Student Actor, we'll use a main program called StudentSimulatorApp.

Revisiting Student-Teacher in Detail

Let's for now consider the message sent by the StudentSimulatorApp to the TeacherActor alone. When I say StudentSimulatorApp, I just mean a normal main program.

Akka Messaging Detailed

The picture conveys this :

(if the terms are overwhelming, don't worry, we'll go through them in detail)

  1. Student creates something called an ActorSystem

  2. It uses the ActorSystem to create something called as ActorRef. The QuoteRequest message is sent to the ActorRef (a proxy to TeacherActor)

  3. Actor ref passes the message along to a MessageDispatcher

  4. The Dispatcher enqueues the message in the target Actor's MailBox.

  5. The Dispatcher then puts the Mailbox on a Thread (more on that in the next section).

  6. The MailBox dequeues a message and eventually delegates that to the actual Teacher Actor's receive method.

Like I said, don't worry about it. Let's look at each step in detail now. You can come back and revisit these five steps once we are done.

The StudentSimulatorApp program

We would use this StudentSimulatorApp to bring up the JVM and initialize the ActorSystem.

Student Simulator App

As we understand from the picture, the StudentSimulatorApp

  1. Creates an ActorSystem
  2. Uses the ActorSystem to create a proxy to the Teacher Actor (ActorRef)
  3. Sends the QuoteRequest message to the proxy.

Let's focus on these three points alone now.

1. Creating an ActorSystem

ActorSystem is the entry point into the ActorWorld. ActorSystems are through which you could create and stop Actors. Or even shutdown the entire Actor environment.

On the other end of the spectrum, Actors are hierarchical and the ActorSystem is also similar to the java.lang.Object or scala.Any for all Actors - meaning, it is the root for all Actors. When you create an Actor using the ActorSystem's actorOf method, you create an Actor just below the ActorSystem.

Student Simulator App

The code for initializing the ActorSystem looks like

val system=ActorSystem("UniversityMessageSystem")

The UniversityMessageSystem is simply a cute name you give to your ActorSystem.

2. Creating a Proxy for TeacherActor?

Let's consider the following snippet :

  val teacherActorRef:ActorRef=actorSystem.actorOf(Props[TeacherActor])

The actorOf is the Actor creation method in ActorSystem. But, as you can see, it doesn't return a TeacherActor which we need. It returns something of type ActorRef.

The ActorRef acts as a Proxy for the actual Actors. The clients do not talk directly with the Actor. This is Actor Model's way of avoiding direct access to any custom/private methods or variables in the TeacherActor or any Actor for that sake.

To repeat, you send messages only to the ActorRef and it eventually reaches your actual Actor. You can NEVER talk to your Actor directly. People will hate you to death if you find some mean ways to do that.

Actor Ref

3. Send a QuoteRequest to the Proxy

It's an one liner again. You just tell the QuoteRequest message to the ActorRef. The tell method in Actor is actually !. (there's also a tell method in ActorRef which just delegates the call back to !)

  //send a message to the Teacher Actor

That's it !!!

If you think I am lying, check the entire code of the StudentSimulatorApp below :


package me.rerun.akkanotes.messaging.firenforget

import akka.actor.ActorSystem  
import akka.actor.Props  
import akka.actor.actorRef2Scala  
import me.rerun.akkanotes.messaging.protocols.TeacherProtocol._
object StudentSimulatorApp extends App{

  //Initialize the ActorSystem
  val actorSystem=ActorSystem("UniversityMessageSystem")

  //construct the Teacher Actor Ref
  val teacherActorRef=actorSystem.actorOf(Props[TeacherActor])

  //send a message to the Teacher Actor

  //Let's wait for a couple of seconds before we shut down the system
  Thread.sleep (2000) 

  //Shut down the ActorSystem.


Well, I cheated a little. You'll have to shutdown the ActorSystem or otherwise, the JVM keeps running forever. And I am making the main thread sleep for a little while just to give the TeacherActor to finish off it's task. I know this sounds stupid. Don't worry about it. We'll write some neat testcases in the next part in order to avoid this hack.

The Message

We just told a QuoteRequest to the ActorRef but we didn't see the message class at all !!

Here it comes :

(It is a recommended practice to wrap your messages in a nice object for easier organization)


package me.rerun.akkanotes.messaging.protocols

object TeacherProtocol{

  case class QuoteRequest()
  case class QuoteResponse(quoteString:String)


As you know, the QuoteRequest is for the requests that come to the TeacherActor. The Actor would respond back with a QuoteResponse.

Dispatcher and a MailBox

The ActorRef delegates the message handling functionality to the Dispatcher. Under the hood, while we created the Actor, a Dispatcher and a MailBox was created. Let's see what they are about.

Message Dispatcher MailBox


Ever Actor has one MailBox (we'll see one special case later). Per our analogy, every Teacher has one mailbox too. The Teacher has to check the mailbox and process the message. In Actor world, it's the other way round - the mailbox, when it gets a chance uses the Actor to accomplish its work.

Also the mailbox has a queue to store and process the messages in a FIFO fashion - a little different from our regular inbox where the most latest is the one at the top.

Now, the dispatcher

Dispatcher does some really cool stuff. From the looks of it, the Dispatcher just gets the message from the ActorRef and passes it on to the MailBox. But there's one amazing thing happening behind the scenes :

The Dispatcher wraps an ExecutorService (ForkJoinPool or ThreadPoolExecutor). It executes the MailBox against this ExecutorService.

Check out this snippet from the Dispatcher

protected[akka] override def registerForExecution(mbox: Mailbox, ...): Boolean = {  
    try {
        executorService execute mbox

What? Did you just say you execute the MailBox?

Yup. We already saw that the MailBox holds all the messages in a Queue. Also since the Executor runs the MailBox, the MailBox must be a Thread. You're right. That's pretty much MailBox's declaration and constructor.

Here's the signature of the Mailbox

private[akka] abstract class Mailbox(val messageQueue: MessageQueue) extends SystemMessageQueue with Runnable

Teacher Actor

Teacher Actor

The MailBox, when it gets its run method fired, dequeues a message from the message queue and passes it to the Actor for processing.

The method that eventually gets called when you tell a message to an ActorRef is the receive method of the target Actor.

The TeacherActor is a rudimentary class which has a List of quotes and obviously the receive method which handles the messages.

Check this out :


package me.rerun.akkanotes.messaging.firenforget

import scala.util.Random

import akka.actor.Actor  
import me.rerun.akkanotes.messaging.protocols.TeacherProtocol._

 * Your Teacher Actor class. 
 * The class could use refinement by way of  
 * using ActorLogging which uses the EventBus of the Actor framework
 * instead of the plain old System out

class TeacherActor extends Actor {

  val quotes = List(
    "Moderation is for cowards",
    "Anything worth doing is worth overdoing",
    "The trouble is you think you have time",
    "You never gonna know if you never even try")

  def receive = {

    case QuoteRequest => {

      import util.Random

      //Get a random Quote from the list and construct a response
      val quoteResponse=QuoteResponse(quotes(Random.nextInt(quotes.size)))

      println (quoteResponse)




The TeacherActor's receive method pattern matches for just one Message - the QuoteRequest (actually, it is a good practice to pattern match the default case but there's an interesting story to tell there)

All that the receive method does is to

  1. pattern match for QuoteRequest
  2. pick a random quote from the static list of quotes
  3. construct a QuoteResponse
  4. print the QuoteResponse to the console


The entire project could be downloaded from github here.

We'll cover more interesting stuff in the parts coming up...

The IoT Zone is brought to you in partnership with GE Digital.  Discover how IoT developers are using Predix to disrupt traditional industrial development models.


Published at DZone with permission of Arun Manivannan, DZone MVB. See the original article here.

Opinions expressed by DZone contributors are their own.

The best of DZone straight to your inbox.

Please provide a valid email address.

Thanks for subscribing!

Awesome! Check your inbox to verify your email so you can start receiving the latest in tech news and resources.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}