Over a million developers have joined DZone.

All Scalability Problems Have Only a Few Solutions

DZone 's Guide to

All Scalability Problems Have Only a Few Solutions

· Performance Zone ·
Free Resource
I was having a great conversation before with some technical folks about some very very hard scalability and throughput (not necessarily response time) issues they were facing.

I racked my brain to think of what I had done in the past and realized it came down to a few different classes of solutions. First and foremost, though, the key to finding the answer is instrumenting your code and/or environment to find out where the bottleneck(s) are.

1) Simplest: Do Less Work

This is kind of obvious, but if it's taking you 10 hours to read through some log files and update the database, perhaps the easiest thing is to do LESS work, e.g. read fewer log files or do fewer database updates.

You could use techniques like reservoir sampling, but maybe you have to calculate a hard number -- the total cost of a set of stock market trades, for example -- estimates don't work.  Then again, perhaps your log files don't need to be so big? Every byte you write has to be FTP'd (and could get corrupted) and that byte has to be read later (even if it's not needed).

I find a lot of people forget another alternative here that involves the theme of "do less work". Basically, if you have a good (enough) model of your input data stream then you can get a "fast but slightly inaccurate" estimate soon and then get "eventual consistency" later. It's kind of like that old adage, "You can have it fast, good or cheap. Pick two!" or like the CAP theorem -- something's gotta give.  Every dev team should have a math nerd on it because mathematicians have been solving problems like this for decades.

2) Simple-ish: Tune What You Already Have
Maybe you've got a MySQL DB -- does it have enough memory?  Perhaps Network I/O is a bottleneck -- dual NICs, then? Check your NIC settings, too (I've hit that once -- 100 Mbps settings on a GBps network). Perhaps you need to lower the priority on other jobs on the system.  Is your network dedicated? What's the latency from server to DB (and elsewhere)?

Maybe when you FTP data files you should gzip them first (CPU is cheap and "plentiful" relative to memory and I/O -- network and disk).  If the write is not the problem, perhaps you can tune your disk-read I/O? Are you using Java NIO?  Have you considered striping your disks?  Not suprisingly, for Hadoop speed-up many of the tuning recommendations are I/O related.

Perhaps you have a multi-threaded system -- can you throw more threads at it or more database connections?

For the database: Can you reuse database connections?  Do you really need all those indexes?  I've seen that it can be faster to drop indexes, do batch uploads and reapply indexes than to leave the indexes in place. Are you seeing database table contention (locking, etc.)?

3) Moderate: Throw Hardware at It
It seems like a cop-out for a developer to say "throw hardware at it," but if you look at the cost of (say) $20k in better hardware (more memory, faster memory, faster disk I/O, etc.) versus paying four developers for a month (costing in the US anywhere from $40k+), it's clear where the upside is.  Developers are probably the most scarce or precious resource you have (in small organizations, anyway) so spend their time wisely. They'll appreciate you for it, too!

3) Harder: Fix or Redesign the Code You Have
This is what coders usually do, but it's expensive (considering how much devs cost these days).
Are there more efficient algorithms? How about batching inserts or updates?

Do you have a hotspot, e.g. disk I/O due to 10 parallel processes reading from disk?
Is the database a bottleneck, perhaps too many updates to the same row, page or table?
If throughput (and not response time) is your issue, then perhaps making things quite a bit more asynchronous, decoupled and multi-threaded will improve your overall throughput.

Maybe instead of a process whereby you read tons of data from a file, update some counters, flush to DB all in the same thread, you decouple the two "blocking" pieces (reading from disk, writing to DB) and that way you can split the problem a bit better -- perhaps splitting the file and having more threads read smaller files? Drop all intermediate data into some shared queue in memory (or Memcached, etc.) and then have another pool of threads read from that shared queue. Instead of one big problem, you have two smaller problems each with a solution that can be optimized independently of the others.

A mix of "fix the code" and "do less work" would be when you realize you are redoing the same calculations over and over again. For example, taking an average from the last 30 days requires you to get today's new data, but also to re-retrieve 29 prior days worth of data. Make sure you precalculate and cache everything you can.  If you are summing the past 30 days of data, for example (D1 ...  D30), tomorrow you will need (D2 ... D31), and you can precalculate (D2 ... D30) today for tomorrow. Not that math is hard for CPUs, but you get the idea ... spend CPU today to save I/O tomorrow!

An example of being smart about what you calculate is here in this MIT paper " Fast Averaging."  If your data is "well behaved," you can get an average with a lot less work.

Decoupling with queues is my favorite technique here, but you have to be smart about what you decouple.

4) Hardest:  Rearchitect What You Have
Developers love to do this, it's like a greenfield but with cool new technology, but it should be the last on your list.  Sometimes, however, it's just necessary. Amazon and eBay have done it countless times. I am sure Google and Facebook have, too. I mean, they INVENTED whole new systems and architectures (NoSQL, BigTable, DynamoDB, etc.) to handle these issues.  Then again Facebook still uses MySQL. :-)

Again, all of these approaches, if they are to be successful and a good use of time, rely on knowing where your bottleneck is in the first place, identifying it and beating on that problem until it cries "Momma!" :-)  But let's never forget that the classes of solutions are pretty constant, and the choice basically comes down to how much time and money you can afford to fix it.

OK, over to you, dear reader, what did I miss, what did I forget? Is there another class of solution?


Published at DZone with permission of

Opinions expressed by DZone contributors are their own.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}