Cisco Launches Insieme – Insides Use (Gasp!) an Overlay Protocol
VMware employees should get a good chuckle out of Cisco‘s Insieme launch on Wednesday, because for all its trash talking about overlays, Insieme is using the VXLAN protocol to run its data-center fabric.
The network overlay model is being championed by a majority of the other vendors doing software-defined networking (SDN), especially VMware, which many believe is the rival that should worry Cisco the most. (Big Switch Networks on Insieme’s side in its dislike of overlays, but it’s hard to see Insieme going on stage and saying, “We’re just like Big Switch.”)
Since its public introduction in June, Insieme has said network overlays suck. The claim is that overlays ultimately won’t scale enough and that they reduce visibility, making network monitoring, troubleshooting, and policy enforcement more difficult.
But VXLAN isn’t so bad after all, apparently.
In launching Insieme’s products and architecture Wednesday, Cisco revealed that the Application-Centric Infrastructure (ACI) uses VXLAN in the fabric that connects leaf switches to spine switches. Blasphemy?
What Insieme Has in Common With QFabric
It’s a little bit like the debate that surfaced around Juniper‘s QFabric data-center fabric. Upon launching QFabric in 2011, Juniper stressed its support for open standards. But QFabric turned out to be running a proprietary protocol across its interior; that’s how it builds the connection between one switch and another.
That doesn’t cancel QFabric’s claims of openness, Juniper says, because nobody else besides Juniper is supposed to talk with that proprietary protocol. Other vendors would use open standards to connect to QFabric; they don’t get exposed to QFabric’s interior. In that sense, QFabric is still an “open” environment.
Similarly, Cisco is using VXLAN as an interior fabric protocol. In that sense, it’s hidden from the outside world.
Now, there’s a major semantic difference here. Juniper can still claim to be “open” because other companies can participate in QFabric in an open fashion. But in Insieme’s case, the network really is doing an overlay. You can’t get around that, because it’s what VXLAN does. It’s just a more contained overlay than what VMware and others do, confined to connecting top-of-rack switches to the data-center spine.
Insieme and Cisco probably won’t change their tune on overlays. It’s too good a debating point against VMware.
But yes, Insieme uses an overlay protocol to build its data-center fabric. And you know, that’s not all that shocking; Cisco helped create VXLAN, after all. For what it’s worth, Insieme is also setting up the Nexus lines to participate in overlays if they really have to — its upgrades to the NX-OS operating system include full, unashamed support of overlay networks through VXLAN bridging and routing. (Most vendors do just the bridging part, Insieme says.)
Upcoming SDNCentral DemoFriday:Cisco Systems, Inc. and developer partner, Glue Networks. On November 15th, join the demo with Cisco and developer partner, Glue Networks as they deep dive into the onePK solution. Sign up today!