Drilling into Big Data: Data Ingestion
Drilling into Big Data: Data Ingestion
In this article, we will take a look at HDFS, the system which allows us to store data in Hadoop.
Join the DZone community and get the full member experience.Join For Free
In the previous article, we have covered different data sources and discussed the most suitable data format to ingest data into our big data environment.
In this article, we will take a dive deep into HDFS, the storage part of Hadoop, which is one of the world’s most reliable storage systems. The distributed storage and replication of data is the major feature of HDFS which makes it a fault-tolerant storage system. The features which make HDFS suitable for large datasets to run on commodity hardware are Fault tolerance, High availability, reliability and scalability.
We covered the master slave model and the types of nodes in our previous article with Alibaba Cloud Object Storage Service (OSS) and E-MapReduce. Let’s look directly at how data is stored in HDFS. Remember the mantra “write-once-read-many,” as a file cannot be edited once it is created and written to HDFS. It can only be read and processed using another tool like Spark and then you can write back to the HDFS file.
Let's assume you need to write a huge file to HDFS. The file will not be directly written into HDFS. It will be broken into small pieces known as blocks. The default block size is 128 MB which can also be increased based on the requirements. HDFS is known for its distributed storage. Thus, these blocks are distributed among different nodes of the cluster. This makes it easy for MapReduce to process the data in parallel. And as a result, Hadoop ends up with distributed storage and distributed processing which makes it efficient in its own way. Now the stored blocks are replicated to other data nodes until the replication factor mentioned is satisfied. The default replication factor is three. HDFS makes sure to replicate the blocks among two nodes of a cluster in one rack and the other node in another rack. This can help improve the app's fault tolerance so that even if the entire rack goes down there will be high availability since the replica is present in another rack too.
You should be familiar with some basic Hadoop commands which will be the basis of the entire cycle. The Hadoop HDFS commands are similar to the Linux environment, hence just prefix the commands with
Here are some commands that we'll be using in this article:
Hadoop fs –ls
We will use these commands one by one in various situations to give a clear understanding of their usage.
Let’s switch the user to Hadoop via
su hadoop. Once done, list the contents under the user with the following command:
$ hadoop fs –ls /user
There are only two directories named
hive under the user. So let’s create a new directory named ‘demo’ by using:
$ hadoop fs –mkdir /user/demo
This directory can be used further as a place to store our ingested and processed files.
When it comes to importing data from a relational database management system (RDBMS) such as MySQL or Oracle into the HDFS, an open source tool called Sqoop is used. Sqoop uses MapReduce to import and export data. With Sqoop, you can:
- Import individual tables or entire databases to files in HDFS.
- Import from SQL databases directly into your Hive data warehouse.
Other than this, Sqoop also supports additional import targets like importing records to HBase and Accumulo. This article focuses on importing data from various databases to HDFS which is primary for a big data play. Import to Hive and HBase will be covered in the later articles.
You no need to install Sqoop separately, as E-MapReduce has come with Sqoop integrated since version 1.3. Let's precheck before using it. Give sqoop-version. This shows you a message that sqoop is up and running and the version of sqoop will be displayed as per our command.
Two important functions to look at:
- Sqoop import
- Sqoop export
To work with these two functions, there are some pre-requisites.
We will be in need of the Namenode location to read and write files to HDFS. The core-site.xml file has the details of where the Namenode runs in the cluster, I/O settings, etc. There are two ways to get this. Either on-premise or in the cloud, and the usual method is to obtain this from ‘core-site.xml’ file which comprises of all configuration details. This can be done by navigating to the file location as shown in the screenshots below.
ls /usr/lib/Hadoop-current/etc/Hadoop to list the various configuration files of HDFS, MapReduce, and Yarn. This path slightly varies based on the providers like Cloudera. From the files listed, you can notice some major files like hdfs-site.xml and core-site.xml file.
But Alibaba Cloud provides a user-friendly UI which reduces the effort of finding configuration files and changing various settings using Linux commands which might be tough for beginners.
Now let’s navigate to the cluster we created. Move to Clusters and Services under Cluster Management tab. You can see the services in action. Click on HDFS
On the following screen navigate to ‘Configuration’ and here you can view all the configuration files which we found using Linux commands. Now changing the configurations becomes easier right!
In the above image, you can see the replication factor which is under hdfs-site.xml. Let’s navigate to core-site.xml and note the Namenode location as follows:
Drivers and Connectors
If the needed drivers are not shipped by Sqoop by default, then download them and save them to the
/usr/lib/sqoop-current/lib. The below points will explain this in detail.
Sqoop mostly runs in the master node, but if you have configured it to run on any of the worker nodes, then install the JDBC drivers only on the machine where Sqoop runs. It’s not necessary to install them on all hosts of your multi-node cluster.
1. Assume your data resides in Oracle Database. Accept the license agreement and download the JDBC Driver for Oracle from the below link, as it will not be available in the default drivers:
Download the JDBC driver which is compatible with your database version and copy it to the Sqoop library as shown below:
$ sudo cp ojdbc6.jar /usr/lib/sqoop-current/lib
sudo gives you superuser privileges and
cp copies the file to the mentioned path.
Now list the contents in the path to make sure whether the file is copied:
There are three formats for connecting with the Oracle server:
2. Assume your data is in MySQL. This latest version of EMR comes with a MySQL connector embedded (if you can see the MySQL connector in previous screenshot).
3. Assume your data is in a Microsoft SQL server, then download the Microsoft SQL Server JDBC driver from the below link and copy this to the Sqoop library like we did earlier:
$ sudo cp sqljdbc_6.0.81_enu.tar.gz /usr/lib/sqoop-current/lib
You can import data in one of two file formats: delimited text or sequence files.
The default import format is delimited text. You can also specify this directly in the command by using the
--as-textfile command which is readily supported for further manipulation by other tools like Hive. Sequence files are binary format files that store individual records in custom record-specific data types. Use
--as-sequencefile in this case.
Sqoop imports data in parallel. To perform the import you can specify the number of map tasks (which is the number of parallel processes) by using
–m. When performing parallel imports, a splitting column is required by which it can split the workload. By default, this splitting column will be the primary key column (if present) in a table. If the values for the primary key are not uniformly distributed, then it results in unbalanced tasks. Hence, explicitly choose a different column with the
Now, I have loaded the sheet
tripadvisor_merged into the Oracle database I am using.
I need to move this to HDFS and hence I downloaded and moved the necessary jar file to the mentioned path as discussed above.
Before performing import or export, let’s try evaluating a query as follows
sqoop eval --connect jdbc:oracle:thin:@188.8.131.52:1556:ORCL --username xxx--password xxx --query "SELECT * FROM TRIP_ADVISOR LIMIT 3"
The above query is based off the following conditions:
If the query is successful, the output table will be displayed in the terminal. Now it’s all set to import the data.
sqoop import --connect jdbc:oracle:thin:@184.108.40.206:1556:ORCL --username xxx --P --table TRIP_ADVISOR --target-dir hdfs://emr-header-1.cluster-88549:9000/user/demo/sqoop -m1
To specify the count of map task, we can use the
-- m option followed by a numeric number.
When we execute the above command, only one map task will get executed.
If you list the directory, you will find only one output file, labeled as
Part-m-00000. If the output directory is not specified, then Sqoop creates a directory with the name of table which you have uploaded in HDFS and divides the data into
part-m-00001, so on.
Here we are importing the entire table. You can also import specific records by using the
where clause. We can also list the databases, list the tables and import all tables present in a database, by using various Sqoop commands.
1. Issue: Missing driver or use of incorrect driver name of the respective
could not load db driver class: oracle.jdbc.OracleDriver
Solution: Place the odbc6.jar in the correct path,
/usr/lib/sqoop/lib, and retry. If the jar file is not recognized, then restart the Sqoop server and try again. You can also manually specify the driver in the command using the
--driver option in Sqoop, as shown below:
sqoop import --connect jdbc:oracle:thin:@192.168.6.23:1526:xxx --username xxx --P –table xxx --target-dir hdfs://emr-header-1.cluster-88549:9000/user/demo/sqoop -m1 --driver oracle.jdbc.driver.OracleDriver
Similarly, for MySQL, use
2. Issue: The network adapter could not establish the connection.
Solution: The connection refused error may occur due to following scenarios:
- The Oracle service might not be running on the given host and port.
- The firewall might restrict the client access to the Oracle server.
So it is better to confirm the Oracle host, port, and the firewall restriction in between them, at the initial stage. This can be easily checked by using telnet.
3. Issue: Incorrect approach of giving password or username of the database.
WARN tool.BaseSqoopTool: Setting your password on the command-line is insecure. Consider using -P instead
Solution: You will receive this message when you mention the password explicitly in the command using –password. Instead try using –P in the command which allows you to enter the password at runtime which is more secure.
- Sqoop does not support a few Hadoop file formats like ORC or RC.
- Mentioning schema and table names in capital letters will prevent facing some issues.
split-byif you need multiple mappers.
- Avoid using column names which are keywords in Sqoop.
- If a table does not have a primary key defined and the
--split-byoption is not provided in the command, then the import will fail unless the number of mappers is explicitly set to one.
In the next article, we will discuss Spark for big data and show you how to set it up on Alibaba Cloud.
“Some of the best theorizing comes after collecting data because then you become aware of another reality.” Robert J. Shiller
Published at DZone with permission of Priyankaa Arunachalam . See the original article here.
Opinions expressed by DZone contributors are their own.