Enabling LDAP Security for DataGrid Cache
Enabling LDAP Security for DataGrid Cache
In this article, you'll learn how to securely configure your JDB cache, by enabling LDAP security on your server. Read on for more!
Join the DZone community and get the full member experience.Join For Free
In this post, we will cover how to add LDAP based security to JDG caches. The principles and techniques remain defined by my colleague Tristan Tarrant, but there are some minor changes that I will be highlighting in this blog for a successful working configuration of JDG enabled with LDAP security.
Before we jump on to configuring the JDG for security, I would like to brush up on the available permissions in JDG:
- READ – typical read operations - get, contains etc., except bulk read.
- WRITE – typical write operations - put, putIfAbsent, replace, remove, evict.
- EXEC – distexec, mapreduce.
- LISTEN – permissions to add Listeners.
- BULK_READ – keySet, values, query, entrySet, etc.
- BULK_WRITE – clear, putAll.
- ALL_READ – all read operations, typically -READ + BULK_READ.
- ALL_WRITE – all write operations, typically WRITE + BULK_WRITE.
- LIFECYCLE – start/stop of caches.
- ADMIN – typical cache administration operations like - getVersion, getCacheConfiguration, etc.
- ALL – All the permissions listed above.
More information on these is available in the JDG Developer Guide.
The complete source code of examples used in this blog is available on Github, here. If you don’t have an LDAP server running on your machine and wish to quickly run one, you can do so by pulling the docker image fabric8/389ds. To run a 389ds-Directory Server with sample users and groups as shown in LDIF, run the following command:
docker run -d --name "dirsrv-389ds" -p 10389:389 fabric8/389ds -e "DIRSRV_ADMIN_USERNAME=admin,DIRSRV_ADMIN_PASSWORD=admin@123, DIRSRV_MANAGER_PASSWORD=admin@123, DIRSRV_SUFFIX=dc=example,dc=com"
The following section shows the Groups and Roles mapping. If you have any questions, refer to Groups and Permissions.
- ClusterAdmins – the user(s) belonging to this group can do ALL operations on JDG cache(s).
- Managers – the users(s) belonging to this group can do ALL_READ, ALL_WRITE, EXEC on JDG cache(s).
- Developers – the user(s) belonging to this group can only WRITE on JDG cache(s).
- Business – the user(s) belonging to this group can only READ on JDG cache(s).
If you are running the dockerized version of the 389ds then all the required groups mentioned above with sample users are all set up. If you are using your own LDAP server, then you’ll import the LDIF to have them created for you.
We leverage the jboss-cli for setting up the LDAP security and configuring the authentication and authorization JDG. The source repo's jboss-cli folder has the following JBOSS CLI commands file, which can help in setting up the LDAP Security and JDG Cache security.
- The JDG Server is up and running with “clustered.xml” as its configuration and its management port is on 9990. If you don’t have JDG running, you can download it from here. Unzip it to a folder of your choice and then start it with the command:
$JBOSS_HOME/bin/standalone.sh -c clustered.xml
- Export the JBOSS_HOME environment variable to point to JDG Home. This is not a must, but a convenience when it comes to running the JBOSS CLI commands.
Before getting started, clone the this GitHub repository to a folder of your choice, let’s call it $PROJECT_HOME, and then change it to the directory jdg-security-demounder $PROJECT_HOME. Unless explicitly stated, all the commands in the following sections will be executed from $PROJECT_HOME/jdg-security-demo directory.
JDG LDAP Security Configuration
- To configure LDAP security, run the following command:
$JBOSS_HOME/bin/cli.sh --controller=127.0.0.1:9990 --connect --file=./jboss-cli/ldap-enable.cli
NOTE: You might need to check the./jboss-cli/ldap-enable.cli for ports, LDAP credentials, etc., corresponding to your LDAP server before running the above command.
- After running the above command, the server will restart. Wait for the server to restart completely.
- Now execute:
$JBOSS_HOME/bin/cli.sh --controller=127.0.0.1:9990 --connect
It will prompt you for a username and password. You can use any of the usernames from LDAP with this demo, as the application is not configured for authorization or management. If you have imported the LDIF, then you can use admin/password to log in to the JBoss CLI. If you are successfully logged in, then LDAP security is configured correctly. Going forward, every subsequent connection via the JBoss CLI will prompt for the username and password.
JDG Cache Security Configuration
- To configure JDG security, run the following command:
$JBOSS_HOME/bin/cli.sh --controller=127.0.0.1:9990 --connect --file=./jboss-cli/jdg-security-enable.cli
- The command will add security to the JDG cache container “clustered” with the roles and permissions mentioned above. The command will also secure the HotRod connector, hence making the clients pass credentials to perform operations on the cache.
Example JDG Cache Configuration
To run the test, let’s create a sample cache and its configuration, which we secured using the LDAP and authorization previously defined. To create sample cache and configuration, run the following command:
$JBOSS_HOME/bin/cli.sh --controller=127.0.0.1:9990 --connect --file=./jboss-cli/cache-security-config.cli
The command above creates a distributed cache configuration called “securedConfig” and creates a distributed cache called “users-cache,” which will use the “securedConfig.”
Testing the Secured Cache
To test the secured cache from the project root, run the following command:
mvn clean test
The project has only one test case called org.workspace7.jdg.JDGSecurityTest, which runs a simple test to check all the roles mentioned above.
A couple of points to note in regards to the setup. The “cache-container” security authentication will still use “identity-role-mapper” instead of “common-name-role-mapper.” This is a workaround for now until the JDG-951 is fixed. To enable this workaround, map correct role names; the LDAP security authorization should be configured to return SIMPLE names for the roles, like shown below:
group-search group-name="SIMPLE" iterative="true" group-dn-attribute="dn" group-name-attribute="cn"group-to-principal search-by="DISTINGUISHED_NAME" base-dn="ou=Groups,dc=example,dc=com"membership-filter principal-attribute="uniqueMember"//group-to-principal/group-search
Ideally, you don’t need to do these updates, as the jboss-clis that were executed earlier takes care of this workaround. Please refer to the JDG Developer Guide for more information on mappers that are available.
That’s it! You are all set to rock with JDG enabled with LDAP Authentication/Authorization; you can check the complete clustered.xml sample here.
Published at DZone with permission of Kamesh Sampath , DZone MVB. See the original article here.
Opinions expressed by DZone contributors are their own.