Over a million developers have joined DZone.

Fixing the Microsoft Windows 10 1709 Post Upgrade Restart Loop

DZone 's Guide to

Fixing the Microsoft Windows 10 1709 Post Upgrade Restart Loop

If you've run into an endless restart loop after upgrading to the Windows 10 1709 version, then we have a fix for you. Read on for the details.

· Performance Zone ·
Free Resource

Recently I needed to upgrade one of my systems to Microsoft Windows 10 1709 (e.g. the September 2017) release that post upgrade resulted in Windows Explorer, desktop, and taskbar going into an endless loop. For those not familiar with Windows 10 1079 learn more here, and here including on how to get the bits (e.g. software). Windows 10 1709 is a semi-annual channel (SAC) Microsoft is following to enable a faster cadence or pace of releases making new features available faster. Note that there is a Windows 10 1709 SAC, as well as Windows Server 2017 SAC (more on that here).

All was well with the 1709 install on Windows 10 until post upgrade when I logged into my account on my laptop (Lenovo X1). Once logged in initially everything looked good until about 10 to 20 seconds later, the screen flickered, the desktop refreshed as did the taskbar. All was well for about another 10 to 20 seconds and again the desktop refreshed as did the taskbar. Trying to use the Windows key plus other keys was no success, likewise trying to use the command prompt, Powershell, or other tools was futile given how quick the refresh occurred.

Powering off the system and rebooting seemed normal, until once logged in and again the desktop and taskbar reset in the same looping fashion. Once again did a shutdown and restart, logged in and the same result.

The Safe Mode Fix

Unless you can access a command prompt or Powershell with administrator privileges, boot into Windows Safe mode.

The solution to the post-Windows 10 1079 upgrade desktop and taskbar restart loop was to boot into safe mode and run the following three commands.

sfc /scannow

dism.exe /online /cleanup-image /scanhealth

dism.exe /online /cleanup-image /restorehealth

Before you can run the above commands, access Windows Safe Mode. Tip: if your Windows 10 system presents a login screen, in the lower right corner select the Shutdown, Restart icon holding down the SHIFT key and select Restart. Your system should reboot presenting you with the following options, selecting Troubleshoot.

Windows 10 Troubleshoot

Next select Advanced options, as shown below.

Windows 10 Advanced Repair Options

Next, select Startup Settings, shown below. Note that this sequence of commands is also used for other troubleshooting scenarios including boot problems, restoring an image, or to a previous protection point among other options.

Windows 10 System Repair Options

The following Startup Settings screen appears, select Restart to enter Safe Mode.

Windows 10 Startup Settings

Your system should then present the following options, select Safe Mode with Command Prompt (option 6).

Windows Safe Mode Options

Next, your system should display a Command Prompt where the following three commands are run:

sfc /scannow 

dism.exe /online /cleanup-image /scanhealth 

dism.exe /online /cleanup-image /restorehealth

Windows Command Prompt in safe mode

Exit, shutdown, reboot and all should be good.

Some Tips and Recommendations

Before any upgrade, make sure you have good backups to enable various recovery points if needed.

If you have not done so recently, make sure you have system restore enabled, as well as underlying hypervisors or storage system snapshot.

If you have BitLocker enabled, before you do any upgrade, make sure to have a copy of your keys handy if you need to use them.

If you rely on PIN or fingerprint for login, make sure you have your real password handy.

If you have not done so recently, make sure your secondary standby emergency access account is working, if you don't have one, create one.

What This All Means

For those who are planning on upgrading to Windows 10 1709, or any system for that matter, being ready for the unexpected can help when the unexpected does occur. While the above is focused on the Windows 10 1079 upgrade, the tips and tools including safe mode are used for many other situations. Keep in mind that if something can go wrong, at some point, it will go wrong, so be prepared. As for Microsoft Windows 10 1079 post upgrade, all is good and it is running well on my different systems including physical as well as virtual devices.

By the way, if you have not heard, its Blogtober, check out some of the other blogs and posts occurring during October here.

Ok, enough said, for now.

windows 10 ,performance ,performance improvements

Published at DZone with permission of

Opinions expressed by DZone contributors are their own.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}