Over a million developers have joined DZone.

Getting Started with MongoDB and Java: Part I

· Java Zone

Microservices! They are everywhere, or at least, the term is. When should you use a microservice architecture? What factors should be considered when making that decision? Do the benefits outweigh the costs? Why is everyone so excited about them, anyway?  Brought to you in partnership with IBM.

Java is one of the most popular programming languages in the MongoDB Community. For new users, it’s important to provide an overview of how to work with the MongoDB Java driver and how to use MongoDB as a Java developer.

In this post, which is aimed at Java/JVM developers who are new to MongoDB, we’re going to give you a guide on how to get started, including:

  • Installation
  • Setting up your dependencies
  • Connecting
  • What are Collections and Documents?
  • The basics of writing to and reading from the database
  • An overview of some of the JVM libraries


The installation instructions for MongoDB are extensively documented, so I’m not going to repeat any of that here. If you want to follow along with this “getting started” guide, you’ll want to download the appropriate version of MongoDB and unzip/install it. At the time of writing, the latest version of MongoDB is 2.6.3, which is the version I’ll be using.

A note about security

In a real production environment, of course you’re going to want to consider authentication. This is something that MongoDB takes seriously and there’s a whole section ofdocumentation on security. But for the purpose of this demonstration, I’m going to assume you’ve either got that working or you’re running in “trusted mode” (i.e. that you’re in a development environment that isn’t open to the public).

Take a look around

Once you’ve got MongoDB installed and started (a process that should only take a few minutes), you can connect to the MongoDB shell. Most of the MongoDB technical documentation is written for the shell, so it’s always useful to know how to access it, and how use it to troubleshoot problems or prototype solutions.

When you’ve connected, you should see something like

MongoDB shell version: 2.6.3 
connecting to: test
> _ 

Since you’re in the console, let’s take it for a spin. Firstly we’ll have a look at all the databases that are there right now:

> show dbs

Assuming this is a clean installation, there shouldn’t be much to see:

> show dbs
admin (empty)
local 0.078GB

That’s great, but as you can see there’s loads of documentation on how to play with MongoDB from the shell. The shell is a really great environment for trying out queries and looking at things from the point-of-view of the server. However, I promised you Java, so we’re going to step away from the shell and get on with connecting via Java.

Getting started with Java

First, you’re going to want to set up your project/IDE to use the MongoDB Java Driver. These days IDEs tend to pick up the correct dependencies through your Gradle or Mavenconfiguration, so I’m just going to cover configuring these.

At the time of writing, the latest version of the Java driver is 2.12.3 - this is designed to work with the MongoDB 2.6 series.


You’ll need to add the following to your dependencies in build.gradle:

compile 'org.mongodb:mongo-java-driver:2.12.3'


For maven, you’ll want:


Alternatively, if you’re really old-school and like maintaining your dependencies the hard way, you can always download the JAR file.

If you don’t already have a project that you want to try with MongoDB, I’ve created a series of unit tests on github which you can use to get a feel for working with MongoDB and Java.

Connecting via Java

Assuming you’ve resolved your dependencies and you’ve set up your project, you’re ready to connect to MongoDB from your Java application.

Since MongoDB is a document database, you might not be surprised to learn that you don’t connect to it via traditional SQL/relational DB methods like JDBC. But it’s simple all the same:

MongoClient mongoClient = new MongoClient(new MongoClientURI("mongodb://localhost:27017"));

Where I’ve put mongodb://localhost:27017, you’ll want to put the address of where you’ve installed MongoDB. There’s more detailed information on how to create the correct URI, including how to connect to a Replica Set, in the MongoClientURI documentation.

If you’re connecting to a local instance on the default port, you can simply use:

MongoClient mongoClient = new MongoClient();

Note that this does throw a checked Exception, UnknownHostException. You’ll either have to catch this or declare it, depending upon what your policy is for exception handling.

The MongoClient is your route in to MongoDB, from this you’ll get your database and collections to work with (more on this later). Your instance of MongoClient (e.g.mongoClient above) will ordinarily be a singleton in your application. However, if you need to connect via different credentials (different user names and passwords) you’ll want aMongoClient per set of credentials.

It is important to limit the number of MongoClient instances in your application, hence why we suggest a singleton - the MongoClient is effectively the connection pool, so for every new MongoClient, you are opening a new pool. Using a single MongoClient (and optionally configuring its settings) will allow the driver to correctly manage your connections to the server. This MongoClient singleton is safe to be used by multiple threads.

One final thing you need to be aware of: you want your application to shut down the connections to MongoDB when it finishes running. Always make sure your application or web server calls MongoClient.close() when it shuts down.

Try out connecting to MongoDB by getting the test in Exercise1ConnectingTest to pass.

Where are my tables?

MongoDB doesn’t have tables, rows, columns, joins etc. There are some new concepts to learn when you’re using it, but nothing too challenging.

While you still have the concept of a database, the documents (which we’ll cover in more detail later) are stored in collections, rather than your database being made up of tables of data. But it can be helpful to think of documents like rows and collections like tables in a traditional database. And collections can have indexes like you’d expect.

Selecting Databases and Collections

You’re going to want to define which databases and collections you’re using in your Java application. If you remember, a few sections ago we used the MongoDB shell to show the databases in your MongoDB instance, and you had an admin and a local.

Creating and getting a database or collection is extremely easy in MongoDB:

DB database = mongoClient.getDB("TheDatabaseName");

You can replace "TheDatabaseName" with whatever the name of your database is. If the database doesn’t already exist, it will be created automatically the first time you insert anything into it, so there’s no need for null checks or exception handling on the off-chance the database doesn’t exist.

Getting the collection you want from the database is simple too:

DBCollection collection = database.getCollection("TheCollectionName");

Again, replacing "TheCollectionName" with whatever your collection is called.

If you’re playing along with the test code, you now know enough to get the tests
in Exercise2MongoClientTest to pass.

An introduction to documents

Something that is, hopefully, becoming clear to you as you work through the examples in this blog, is that MongoDB is different from the traditional relational databases you’ve used. As I’ve mentioned, there are collections, rather than tables, and documents, rather than rows and columns.

Documents are much more flexible than a traditional row, as you have a dynamic schema rather than an enforced one. You can evolve the document over time without incurring the cost of schema migrations and tedious update scripts. But I’m getting ahead of myself.

Although documents don’t look like the tables, columns and rows you’re used to, they should look familiar if you’ve done anything even remotely JSON-like. Here’s an example:

person = {
_id: "jo",
name: "Jo Bloggs",
age: 34,
address: {
street: "123 Fake St",
city: "Faketon",
state: "MA",
zip: “12345”
books: [ 27464, 747854, ...]

There are a few interesting things to note:

  1. Like JSON, documents are structures of name/value pairs, and the values can be one of a number of primitive types, including Strings and various number types.
  2. It also supports nested documents - in the example above, address is a subdocument inside the person document. Unlike a relational database, where you might store this in a separate table and provide a reference to it, in MongoDB if that data benefits from always being associated with its parent, you can embed it in its parent.
  3. You can even store an array of values. The books field in the example above is an array of integers that might represent, for example, IDs of books the person has bought or borrowed.

You can find out more detailed information about Documents in the documentation.

Creating a document and saving it to the database

In Java, if you wanted to create a document like the one above, you’d do something like:

List<Integer> books = Arrays.asList(27464, 747854);
DBObject person = new BasicDBObject("_id", "jo")
 .append("name", "Jo Bloggs")
 .append("address", new BasicDBObject("street", "123 Fake St")
 .append("city", "Faketon")
 .append("state", "MA")
 .append("zip", 12345))
 .append("books", books);

At this point, it’s really easy to save it into your database:

MongoClient mongoClient = new MongoClient();
DB database = mongoClient.getDB("Examples");
DBCollection collection = database.getCollection("people");

Note that the first three lines are set-up, and you don’t need to re-initialize those every time.

Now if we look inside MongoDB, we can see that the database has been created:

> show dbs
Examples 0.078GB
admin (empty)
local 0.078GB
> _

…and we can see the collection has been created as well:

> use Examples
switched to db Examples
> show collections
> _ 

…finally, we can see the our person, “Jo”, was inserted:

> db.people.findOne()
"_id" : "jo",
"name" : "Jo Bloggs",
"age": 34,
"address" : {
"street" : "123 Fake St",
"city" : "Faketon",
"state" : "MA",
"zip" : "12345"
"books" : [
> _

As a Java developer, you can see the similarities between the Document that’s stored in MongoDB, and your domain object. In your code, that person would probably be a Person class, with simple primitive fields, an array field, and an Address field.

So rather than building your DBObject manually like the above example, you’re more likely to be converting your domain object into a DBObject. It’s best not to have the MongoDB-specific DBObject class in your domain objects, so you might want to create a PersonAdaptor that converts your Person domain object to a DBObject:

public static final DBObject toDBObject(Person person) {

 return new BasicDBObject("_id", person.getId())

 .append("name", person.getName())

 .append("address", new BasicDBObject("street", person.getAddress().getStreet())

 .append("city", person.getAddress().getTown())

 .append("phone", person.getAddress().getPhone()))

 .append("books", person.getBookIds());

As before, once you have the DBObject, you can save this into MongoDB:
Now you’ve got all the basics to get the tests in Exercise3InsertTest to pass.

Getting documents back out again

Now you’ve saved a Person to the database, and we’ve seen it in the database using the shell, you’re going to want to get it back out into your Java application. In this post, we’re going to cover the very basics of retrieving a document - in a later post we’ll cover more complex querying.

You’ll have guessed by the fact that MongoDB is a document database that we’re not going to be using SQL to query. Instead, we query by example, building up a document that looks like the document we’re looking for. So if we wanted to look for the person we saved into the database, “Jo Bloggs”, we remember that the _id field had the value of “jo”, and we create a document that matches this shape:

DBObject query = new BasicDBObject("_id", "jo");

DBCursor cursor = collection.find(query);
As you can see, the find method returns a cursor for the results. Since _id needs to be unique, we know that if we look for a document with this ID, we will find only one document, and it will be the one we want:
DBObject jo = cursor.one();
Earlier we saw that documents are simply made up of name/value pairs, where the value can be anything from a simple String or primitive, to more complex types like arrays or subdocuments. Therefore in Java, we can more or less treat DBObject as aMap<String, Object>. So if we wanted to look at the fields of the document we got back from the database, we can get them with:
Note that you’ll need to cast the value to a String, as the compiler only knows that it’s anObject.

If you’re still playing along with the example code, you’re now ready to take on all the tests in Exercise4RetrieveTest

Overview of JVM Libraries

So far I’ve shown you the basics of the official Java Driver, but you’ll notice that it’s quite low-level - you have to do a lot of taking things out of your domain objects and poking them into MongoDB-shaped DBObjects, and vice-versa. If this is the level of control you want, then the Java driver makes this easy for you. But if it seems like this is extra work that you shouldn’t have to do, there are plenty of other options for you.

The tools I’m about to describe all use the MongoDB Java Driver at their core to interact with MongoDB. They provide a high-level abstraction for converting your domain objects into MongoDB documents, whilst also giving you a way to get to the underlying driver as well in case you need to use it at a lower level.


Morphia is a really lightweight ODM (Object Document Mapper), so it’s similar to ORMs like Hibernate. Documents can be in a fairly similar shape to your Java domain objects, so this mapping can be automatic, but Morphia allows you point the mapper in the right direction.

Morphia is open source, and has contributors from MongoDB. Sample code and documentation can be found here.

Spring Data

Another frequently used ODM is Spring Data. This supports traditional relational and non-relational databases, including MongoDB. If you’re already using Spring in your application, this should be a familiar way to work.

As always with Spring projects, there’s a lot of really great documentation, including aGetting Started guide with example code.


If you’re working with web services or something else that supports JSON, and you’re usingJackson to work with this data, it probably seems like a waste to be turning it from this form into a Java object and then into a MongoDB DBObject. But MongoJack might make your job easier, as it’s designed to map JSON objects directly into MongoDB. Take a look at theexample code and documentation.


This is another Jackson-based ODM, but provides an interesting extra in the form of supporting queries the way you’d write them in the shell. Documentation and example code is available on the website.

Grails MongoDB GORM

The Grails web application framework also supports its own Object-Relational Mapping (GORM), including support for MongoDB. More documentation for this plugin can be found here.


This isn’t an ODM like the other tools mentioned, but the officially supported Scala driver for MongoDB. Like the previous libraries, it uses the MongoDB Java Driver under the covers, but it provides a Scala API for application developers to work with. If you like working with Scala but are searching for an async solution, consider ReactiveMongo, a community-supported driver that provides async and non-blocking operations.

Other libraries and tools

This is far from an extensive list, and I apologise if I’ve left a favourite out. But we’ve compiled a list of many more libraries for the JVM, which includes community projects and officially supported drivers.


We’ve covered the basics of using MongoDB from Java - we’ve touched on what MongoDB is, and you can find out a lot more detailed information about it from the manual; we’veinstalled it somewhere that lets us play with it; we’ve talked a bit about collections and documents, and what these look like in Java; and we’ve started inserting things into MongoDB and getting them back out again.

If you haven’t already started playing with the test code, you can find it in this github repository. And if you get desperate and look hard enough, you’ll even find the answers there too.

Finally, there are more examples of using the Java Driver in the Quick Tour, and there isexample code in github, including examples for authentication.

If you want to learn more, try our 7-week online course, "Intro to MongoDB and Java" which started on MongoDB University this week.

Try it out, and hopefully you’ll see how easy it is to use MongoDB from Java.

Discover how the Watson team is further developing SDKs in Java, Node.js, Python, iOS, and Android to access these services and make programming easy. Brought to you in partnership with IBM.


Published at DZone with permission of Trisha Gee, DZone MVB. See the original article here.

Opinions expressed by DZone contributors are their own.

The best of DZone straight to your inbox.

Please provide a valid email address.

Thanks for subscribing!

Awesome! Check your inbox to verify your email so you can start receiving the latest in tech news and resources.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}