{{announcement.body}}
{{announcement.title}}

Restoring Default Firmware on Seeed Arch Mix NXP i.MX RT1052 Board

DZone 's Guide to

Restoring Default Firmware on Seeed Arch Mix NXP i.MX RT1052 Board

Learn more about restoring default firmware on Seeed Arch Mix.

· IoT Zone ·
Free Resource

In my previous article, "Debug and Execute Code from FLASH on the Seeed Arch Mix NXP i.MX RT1052 Board," I explained how to take complete control over the board and flash and debug firmware. Of course, this overwrites the one which comes by default shipped on the board. This article is about how to restore or update the original firmware.

Image title

Restored Seeed Firmware

This article shows how to restore the original Seeed firmware on the Arch Mix i.MX RT1052 board (or to flash any other firmware or a binary file).

What you need is:

Image title

Debugging the Seeed Arch Mix i.MX RT1052 Board with LPC-Link2 and MCUXpresso IDE

 Do *not* install the jumper JP2 (provide power to the target), as with this debugging most likely will fail.

Download the firmware zip file from the Seeed Wiki page.

There are two parts involved:

  1. The bootloader (originally developed with Keil tools, but we don't want to use that here)
  2. The firmware which includes MicroPython

1. Bootloader

From that zip file, extract the ' bootloader.zip ' file:

Image title

Firmware_and_Tools.zip

From that bootloader.zip file, extract the file rtthread-imxrt.axf:

Image titlertthread-imxrt.axf

From the NXP MCUXpresso IDE, open the GUI Flash tool and use the .axf file for the programming:

Image title

Flashing Default Firmware

To erase any firmware parts too, select 'program (mass erase first)'

With this, the bootloader is programmed on the board and should show up on the console like this:

Image title

Restored bootloader

Next, we load the firmware (application).

2. Firmware

Reset the board and enter a key to stop autoboot and to enter the bootloader mode:

Image title

Entered bootloader mode

Now, the more difficult part because the firmware loader has not been translated from Chinese: Run the PersimmonModConfigTool.exe (a C# application), which is included as 'Config' tool inside the zip file and click on that menu item to the right:

Image title

Persimmon

Use the 'browse' button to the right to select the *.rbl file, which is part of the firmware zip file. Then, use the button on the bottom to transmit the file:

Image title

File to load

The tool will report the status:

Image title

Status

More verbose output is produced in the console.

That's it: I have the original firmware again running on the board:

Image title

Restored Seeed Firmware

Happy restoring!

Topics:
seeed ,iot ,board ,tutorial ,microcontroller ,nxp i.mx rt1052 ,firmware

Published at DZone with permission of

Opinions expressed by DZone contributors are their own.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}