Over a million developers have joined DZone.
{{announcement.body}}
{{announcement.title}}

Tutorial: Transforming the NXP LPC845-BRK Into a CMSIS-DAP Debug Probe

DZone 's Guide to

Tutorial: Transforming the NXP LPC845-BRK Into a CMSIS-DAP Debug Probe

You can a do a lot with just six bucks!

· IoT Zone ·
Free Resource

The NXP LPC845-BRK board is a tiny an inexpensive (sub $6) breakout board. The board includes a CMSIS-DAP (LPC11U35) on-board debug probe, which can be used as a debug probe to debug any NXP LPC, Kinetis, or i.MX RT device

LPC845-BRK used to debug robot

LPC845-BRK used to debug a Sumo Battle Robot

The LPC845-BRK board features the JP1 cut-trace jumper. The intent of that jumper is to measure the current of the target CPU. But actually, this jumper can be used to turn the board into an (undocumented?) general purpose CMSIS-DAP debug probe. I have tested it with the MCUXpresso IDE and have been able to debug Kinetis, LPC, and i.MX RT boards that way. So, with $6, I not only have a cool and tiny development board; with the addition of an SWD header, an SWD cable, and a jumper, I have cool and tiny debug probe.

Here are the steps to turn the LPC845-BRK into a general purpose debug probe:

1. Solder an SWD header to the board, see Tutorial: Using external Debug Probes with NXP LPC845-BRK BoardAdded SWD Header

Added SWD Header

2. Locate the JP1 on the board. There is a tiny PCB trace between the pads. Use a knife to cut that trace. JP1 trace to cut

JP1 trace to cut

I recommend soldering a jumper on JP1. That way, I can use the board both as development board (JP1 installed) and as a CMSIS-DAP Debug probe (JP1 removed).Installed Jumper JP1 on NXP LPC845-BRK

Installed Jumper JP1 on NXP LPC845-BRK

3. Use a standard 10pin SWD cable to connect to the targetSWD Cable Connected

SWD Cable Connected

4. The MCUXpresso IDE automatically detects the LPC11U3x CMSIS-DAP debug probe: LPC11U3x in MCUXpresso IDE

LPC11U3x in MCUXpresso IDE

With this, I can debug any ARM Cortex supported by the MCUXpresso IDE or any other CMSIS-DAP debugger:Debugging i.MX RT1064 with LPC845-BRK Board

Debugging i.MX RT1064 with LPC845-BRK Board

i.MXRT1064 board with LPC845-BRK as debug probe

i.MXRT1064 board with LPC845-BRK as debug probe

Summary

With very small changes, I can turn a normal $6 NXP LPC845-BRK board into a CMSIS-DAP debug probe to debug external Kinetis, LPC, or i.MX boards. I’m able to do this with the NXP MCUXpresso IDE, but that should work with other IDE’s too. All that I need is a knife, a jumper, and 2pin header with an SWD cable and connector.

Does this make my P&E, Segger, or LPC-Link2 debug probes obsolete? Definitely not, because other probes offer different features or are faster. For example, I measured a 3-5x faster Flash programming with the LPC-Link2 ($20) compared to the LPC11U35 ($6) based debug probe. Still, for that $6, it is a very decent debugging experience. For me, every dollar spent on debug probes is always a good investment, and having more probes at hand is definitely a plus, especially if they are inexpensive like this one.

Here is a list of articles about the LPC845-BRK board:

Here are some other useful links:

Happy Transforming!

Topics:
iot ,tutorial ,microcontrollers ,debug ,probe ,cmsis-dap ,nxp lpc845-brk ,board ,mcuxpresso ide

Published at DZone with permission of

Opinions expressed by DZone contributors are their own.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}