A Service Mesh for Kubernetes (Part 2): Pods Are Great Until They're Not

DZone 's Guide to

A Service Mesh for Kubernetes (Part 2): Pods Are Great Until They're Not

You can use linkerd as a service mesh with Kubernetes. In Part 2 of this series, see how and why you should install linkerd using DaemonSets.

· Integration Zone ·
Free Resource

In our recent post about linkerd on Kubernetes, A Service Mesh for Kubernetes, Part I: Top-Line Service Metrics, observant readers noticed that linkerd was installed using DaemonSets rather than as a sidecar process. In this post, we’ll explain why (and how!) we do this.

As a service mesh, linkerd is designed to be run alongside application code, managing and monitoring inter-service communication, including performing service discovery, retries, load-balancing, and protocol upgrades.

At a first glance, this sounds like a perfect fit for a sidecar deployment in Kubernetes. After all, one of Kubernetes’s defining characteristics is its pod model. Deploying as a sidecar is conceptually simple, has clear failure semantics, and we’ve spent a lot of time optimizing linkerd for this use case.

However, the sidecar model also has a downside: deploying per pod means that resource costs scale per pod. If your services are lightweight and you run many instances, like Monzo (who built an entire bank on top of linkerd and Kubernetes), then the cost of using sidecars can be quite high.

We can reduce this resource cost by deploying linkerd per host rather than per pod. This allows resource consumption to scale per host, which is typically a significantly slower-growing metric than pod count. And, happily, Kubernetes provides DaemonSets for this very purpose.

Unfortunately, for linkerd, deploying per host is a bit more complicated than just using DaemonSets. Read on for how we solve the service mesh problem with per-host deployments in Kubernetes.

A Service Mesh for Kubernetes

One of the defining characteristics of a service mesh is its ability to decouple application communication from transport communication. For example, if services A and B speak HTTP, the service mesh may convert that to HTTPS across the wire, without the application being aware. The service mesh may also be doing connection pooling, admission control, or other transport-layer features, also in a way that’s transparent to the application.

In order to fully accomplish this, linkerd must be on the sending side and the receiving side of each request, proxying to and from local instances. E.g. for HTTP to HTTPS upgrades, linkerd must be able to both initiate and terminate TLS. In a DaemonSet world, a request path through linkerd looks like the diagram below:

service mesh deployed per host

As you can see, a request that starts in Pod A on Host 1 and is destined for Pod J on Host 2 must go through Pod A’s host-local linkerd instance, then to Host 2’s linkerd instance, and finally to Pod J. This path introduces three problems that linkerd must address:

  • How does an application identify its host-local linkerd?
  • How does linkerd route an outgoing request to the destination’s linkerd?
  • How does linkerd route an incoming request to the destination application?

What follows are the technical details on how we solve these three problems. If you just want to get linkerd working with Kubernetes DaemonSets, see the previous blog post!

How Does an Application Identify Its Host-Local linkerd?

Since DaemonSets use a Kubernetes  hostPort , we know that linkerd is running on a fixed port on the host’s IP. Thus, in order to send a request to the linkerd process on the same machine that it’s running on, we need to determine the IP address of its host.

In Kubernetes 1.4 and later, this information is directly available through the Downward API. Here is an except from hello-world.yml that shows how the node name can be passed into the application:

        - name: NODE_NAME
              fieldPath: spec.nodeName
        - name: http_proxy
          value: $(NODE_NAME):4140
        - "-addr=:7777"
        - "-text=Hello"
        - "-target=world"

(Note that this example sets the http_proxy environment variable to direct all HTTP calls through the host-local linkerd instance. While this approach works with most HTTP applications, non-HTTP applications will need to do something different.)

In Kubernetes releases prior to 1.4, this information is still available, but in a less direct way. We provide a simple script that queries the Kubernetes API to get the host IP; the output of this script can be consumed by the application, or used to build anhttp_proxy environment variable as in the example above.

Here is an excerpt from hello-world-legacy.yml that shows how the host IP can be passed into the application:

        - name: POD_NAME
              fieldPath: metadata.name
        - name: NS
              fieldPath: metadata.namespace
        - "/bin/sh"
        - "-c"
        - "http_proxy=`hostIP.sh`:4140 helloworld -addr=:7777 -text=Hello -target=world"

Note that the hostIP.sh script requires that the pod’s name and namespace be set as environment variables in the pod.

How Does linkerd Route an Outgoing Request to the Destination's linkerd?

In our service mesh deployment, outgoing requests should not be sent directly to the destination application, but instead should be sent to the linkerd running on that application’s host. To do this, we can take advantage of a powerful new feature introduced in linkerd 0.8.0 called transformers, which can do arbitrary post-processing on the destination addresses that linkerd routes to. In this case, we can use the DaemonSet transformer to automatically replace destination addresses with the address of a DaemonSet pod running on the destination’s host. For example, this outgoing router linkerd config sends all requests to the incoming port of the linkerd running on the same host as the destination app:

- protocol: http
  label: outgoing
    kind: default
    - kind: io.l5d.k8s.daemonset
      namespace: default
      port: incoming
      service: l5d

How Does linkerd Route an Incoming Request to the Destination Application?

When a request finally arrives at the destination pod’s linkerd instance, it must be correctly routed to the pod itself. To do this we use the localnode  transformer to limit routing to only pods running on the current host. Example linkerd config:

- protocol: http
  label: incoming
    kind: default
    - kind: io.l5d.k8s.localnode

Deploying linkerd as a Kubernetes DaemonSet gives us the best of both worlds—it allows us to accomplish the full set of goals of a service mesh (such as transparent TLS, protocol upgrades, latency-aware load balancing, etc), while scaling linkerd instances per host rather than per pod.

For a full, working example, see the previous blog post, or download our example app. And for help with this configuration or anything else about linkerd, feel free to drop into our very active Slack or post a topic on linkerd discourse.

integration ,kubernetes ,linkerd ,tutorial

Published at DZone with permission of Alex Leong , DZone MVB. See the original article here.

Opinions expressed by DZone contributors are their own.

{{ parent.title || parent.header.title}}

{{ parent.tldr }}

{{ parent.urlSource.name }}