When Microservices Are a Bad Idea
Microservices are not always the way.
Join the DZone community and get the full member experience.Join For Free
On paper, microservices sound wonderful. They are modular, scalable, and fault tolerant. A lot of companies have had great success using this model, so microservices might naturally seem to be the superior architecture and the best way to start new applications.
However, most firms that have succeeded with microservices did not begin with them. Consider the examples of Airbnb and Twitter, which went the microservice route after outgrowing their monoliths and are now battling its complexities. Even successful companies that use microservices appear to still be figuring out the best way to make them work. It is evident that microservices come with their share of tradeoffs.
Migrating from a monolith to microservices is also not a simple task., and creating an untested product as a new microservice is even more complicated. Microservices should only be seriously considered after evaluating the alternative paths.
Microservices Are Only Viable for Mature Products
On the topic of starting from a microservice design, Martin Fowler observed that:
Almost all the successful microservice stories started with a monolith that got too big and was broken up.
Almost all the cases where a system that was built as a microservice system from scratch, ended up in serious trouble.
This pattern has led many to argue that you shouldn't start a new project with microservices, even if you're sure your application will be big enough to make it worthwhile.
The first design is rarely fully optimized. The first few iterations of any new product are spent finding what users really need. Therefore, success hinges on staying agile and being able to improve, redesign, and refactor quickly. In this regard, microservices are manifestly worse than a monolith. If you don’t nail the initial design, you’re in for a rough start, as it’s much harder to refactor a microservice than a monolith.
Are You a Startup or Working on a Greenfield Project?
As a startup (not likely in this economy), you already are running against the clock, looking for a breakthrough before the next bad thing happens. You don’t need the scalability at this point (and probably not for a few years yet), so why ignore your customers by using a complicated architecture model?
A similar argument can be made when working on greenfield projects, which are unconstrained by earlier work and hence have nothing upon which to base decisions. Sam Newman, author of Building Microservices: Designing Fine-Grained Systems, stated that it is very difficult to build a greenfield project with microservices:
I remain convinced that it is much easier to partition an existing "brownfield" system than to do so upfront with a new, greenfield system. You have more to work with. You have code you can examine, you can speak to people who use and maintain the system. You also know what 'good' looks like - you have a working system to change, making it easier for you to know when you may have got something wrong or been too aggressive in your decision-making process.
Microservices Aren’t the Best for On-premise
Microservice deployments need robust automation because of all the moving parts. Under normal circumstances, we can rely on continuous deployment pipelines for the job–Developers deploy the microservices and customers just use the application online.
This won’t fly for on-premise applications, where developers publish a package and it's up to the customer to manually deploy and configure everything on their own on their private systems. Microservices make all these tasks especially challenging, so this is a release model that does not fit nicely with microservice architecture.
To be clear, developing an on-premise microservice application is entirely viable. Semaphore is accomplishing just that with Semaphore On-Premise. However, as we realized along the way, there are several challenges to overcome. Consider the following before deciding to adopt microservices on-premise:
- Versioning rules for on-premise microservices are more stringent. You must track each individual microservice that participates in a release.
- You must carry out thorough integration and end-to-end testing, as you can’t test in production.
- Troubleshooting a microservice application is substantially more difficult without direct access to the production environment.
Your Monolith Might Have Life Left
Every piece of software has a lifecycle. You might be tempted to scrap a monolith because it’s old and has its share of complications. But tossing a working product is wasteful. With a little effort, you might be able to squeeze a few more good years out of your current system.
There are two moments when it might seem that microservices are the only way forward:
- Tangled codebase: it’s hard to make changes and add features without breaking other functionality.
- Performance: you’re having trouble scaling the monolith.
Modularizing the Monolith
A common reason developers want to avoid monoliths is their proclivity to deteriorate into a tangle of code. It’s challenging to add new features when we get to this point since everything is interconnected.
But a monolith does not have to be a mess. Take the example of Shopify: with over 3 million lines of code, theirs is one of the largest Rails monoliths in the world. At one point, the system grew so large it caused much grief to developers:
The application was extremely fragile with new code having unexpected repercussions. Making a seemingly innocuous change could trigger a cascade of unrelated test failures. For example, if the code that calculates our shipping rate is called into the code that calculates tax rates, then making changes to how we calculate tax rates could affect the outcome of shipping rate calculations, but it might not be obvious why. This was a result of high coupling and a lack of boundaries, which also resulted in tests that were difficult to write, and very slow to run on CI.
Instead of rewriting their entire monolith as microservices, Shopify chose modularization as the solution.
Modularization is a lot of work, that’s true. But it also adds a ton of value because it makes development more straightforward. New developers do not have to know the whole application before they can start making changes. They only need to be familiar with one module at a time. Modularity makes a large monolith feel small.
Modularization is a required step before transitioning to microservices, and it may be a better solution than microservices. The modular monolith, like in microservices, solves the tangled codebase problem by splitting the code into independent modules. Unlike with microservices, where communication happens over a network, the modules in the monolith communicate over internal API calls.
Monoliths Can Scale
Another misconception about monoliths is that they can’t scale. If you’re experiencing performance issues and think that microservices are the only way out, think again. Shopify has shown us that sound engineering can make a monolith on work on a mind-boggling scale:
The architecture and technology stack will determine how the monolith can be optimized; a process that almost invariably will start with modularization and can leverage cloud technologies for scaling:
- Deploying multiple instances of the monolith and using load balancing to distribute the traffic.
- Distributing static assets and frontend code using CDNs.
- Using caching to reduce the load on the database.
- Implementing high-demand features with edge computing or serverless functions.
If It’s Working, Don’t Fix It
If we measure productivity as the number of value-adding features implemented over time, then it follows that switching architecture makes little sense while productivity is strong.
True, something will have to change eventually. But that could be years from now, and by then, requirements may have changed — and who knows what new architecture models may emerge in the meantime?
Brooke’s Law and Developer Productivity
In The Mythical Man Month (1975), Fred Brook Jr stated that “adding manpower to a late software project makes it later”. This happens because new developers must be mentored before they can work on a complex codebase. Also, as the team grows, the communication overhead increases. It’s harder to get organized and make decisions.
Before using microservices, you must determine if Brooke’s Law is affecting your monolith. Switching to microservices too soon would not add much value.
Are You Ready to Transition?
Some conditions must be met before you can begin working with microservices. Along with preparing your monolith, you’ll need to:
- Set up continuous integration and continuous delivery for automatic deployment.
- Implement quick provisioning to build infrastructure on demand.
- Learn about cloud-native tech stacks, including containers, Kubernetes, and serverless.
- Get acquainted with Domain-Driven Design, Test-Driven Development, and Behavior-Driven Development.
- Reorganize the teams to be cross-functional, removing silos and flattening hierarchies to allow for innovation.
- Foster a DevOps culture in which the lines between developer and operations jobs are blurred.
Changing the culture of an organization can take years. Learning all that there is to know will take months. Without preparation, transitioning to microservices is unlikely to succeed.
We can summarize this whole discussion about transitioning to microservices in one sentence: don’t do it unless you have a good reason. Companies that embark on the journey to microservices unprepared and without a solid design will have a very tough time of it. You need to achieve a critical mass of engineering culture and scaling know-how before microservices should be considered as an option.
In the meantime, why change if your system is performing well and you’re still developing features at a decent pace?
Thanks for reading, and happy coding!
Published at DZone with permission of Tomasz Nurkiewicz, DZone MVB. See the original article here.
Opinions expressed by DZone contributors are their own.