Note: the following article is purely theoretical. I don’t know if it fits a real-life use-case, but the point is just too good to miss Java’s List sorting has two flavors: one follows the natural ordering of collection objects, the other requires an external comparator. In the first case, Java assumes objects are naturally ordered. From a code point of view, this means types of objects in the list must implement the Comparable interface. For example, such is the case for String and Date objects. If this is not the case, or if objects cannot be compared to one another (because perhapsthey belong to incompatible type as both String and Date). The second case happens when the natural order is not relevant and a comparator has to be implemented. For example, strings are sorted according to the character value, meaning case is relevant. When the use-case requires a case-insensitive sort, the following code will do (using Java 8 enhanced syntax): Collections.sort(strings, (s1, s2) -> s1.compareToIgnoreCase(s2)); The Comparable approach is intrinsic, the Comparator extrinsic; the former case rigid, the latter adaptable to the required context. What applies to lists, however, cannot be applied to Java sets. Objects added to sets have to define equals() and hashCode() and both properties (one could say that it’s only one since they are so coupled together) are intrinsic. There is no way to define an equality that can change depending on the context in the JDK. Enters Trove: The Trove library provide primitive collections with similar APIs to the above. This gap in the JDK is often addressed by using the “wrapper” classes (java.lang.Integer, java.lang.Float, etc.) with Object-based collections. For most applications, however, collections which store primitives directly will require less space and yield significant performance gains. Let’s be frank, Trove is under-documented. However, it offers what is missing regarding extrinsic equality: it provides a dedicated set implementation, that accepts its own extrinsic equality abstraction. A sample code would look like that: HashingStrategy strategy = new MyCustomStrategy(); Set dates = new TCustomHashSet(strategy); A big bonus for using Trove is performance, though: It probably is the first argument to use Trove I never tested that in any context To go further, just have a look at Trove for yourself.

Nginx-Clojure is a Nginx module for embedding Clojure or Java programs, typically those Ring based handlers.

Caching allows you to significantly speed up applications with only little effort. Two great cache implementations for the Java platform are the Guava caches and Ehcache. While Ehcache is much richer in features (such as its Searchable API, the possibility of persisting caches to disk or overflowing to big memory), it also comes with quite an overhead compared to Guava. In a recent project, I found a need to overflow a comprehensive cache to disk but at the same time, I regularly needed to invalidate particular values of this cache. Because Ehcache's Searchable API is only accessible to in-memory caches, this put me in quite a dilemma. However, it was quite easy to extend a Guava cache to allow overflowing to disk in a structured manner. This allowed me both overflowing to disk and the required invalidation feature. In this article, I want to show how this can be achieved. I will implement this file persisting cache FilePersistingCache in form of a wrapper to an actual Guava Cache instance. This is of course not the most elegant solution (more elegant would to implement an actual Guava Cache with this behavior), but I will do for most cases. To begin with, I will define a protected method that creates the backing cache I mentioned before: private LoadingCache makeCache() { return customCacheBuild() .removalListener(new PersistingRemovalListener()) .build(new PersistedStateCacheLoader()); } protected CacheBuilder customCacheBuild(CacheBuilder cacheBuilder) { return CacheBuilder.newBuilder(); } The first method will be used internally to build the necessary cache. The second method is supposed to be overridden in order to implement any custom requirement to the cache as for example an expiration strategy. This could for example be a maximum value of entries or soft references. This cache will be used just as any other Guava cache. The key to the cache's functionality are the RemovalListener and the CacheLoader that are used for this cache. We will define these two implementation as inner classes of the FilePersistingCache: private class PersistingRemovalListener implements RemovalListener { @Override public void onRemoval(RemovalNotification notification) { if (notification.getCause() != RemovalCause.COLLECTED) { try { persistValue(notification.getKey(), notification.getValue()); } catch (IOException e) { LOGGER.error(String.format("Could not persist key-value: %s, %s", notification.getKey(), notification.getValue()), e); } } } } public class PersistedStateCacheLoader extends CacheLoader { @Override public V load(K key) { V value = null; try { value = findValueOnDisk(key); } catch (Exception e) { LOGGER.error(String.format("Error on finding disk value to key: %s", key), e); } if (value != null) { return value; } else { return makeValue(key); } } } As obvious from the code, these inner classes call methods of FilePersistingCache we did not yet define. This allows us to define custom serialization behavior by overriding this class. The removal listener will check the reasons for a cache entry being evicted. If the RemovalCause is COLLECTED, the cache entry was not manually removed by the user but it was removed as a consequence of the cache's eviction strategy. We will therefore only try to persist a cache entry if the user did not wish the entries removal. The CacheLoader will first attempt to restore an existent value from disk and create a new value only if such a value could not be restored. The missing methods are defined as follows: private V findValueOnDisk(K key) throws IOException { if (!isPersist(key)) return null; File persistenceFile = makePathToFile(persistenceDirectory, directoryFor(key)); (!persistenceFile.exists()) return null; FileInputStream fileInputStream = new FileInputStream(persistenceFile); try { FileLock fileLock = fileInputStream.getChannel().lock(); try { return readPersisted(key, fileInputStream); } finally { fileLock.release(); } } finally { fileInputStream.close(); } } private void persistValue(K key, V value) throws IOException { if (!isPersist(key)) return; File persistenceFile = makePathToFile(persistenceDirectory, directoryFor(key)); persistenceFile.createNewFile(); FileOutputStream fileOutputStream = new FileOutputStream(persistenceFile); try { FileLock fileLock = fileOutputStream.getChannel().lock(); try { persist(key, value, fileOutputStream); } finally { fileLock.release(); } } finally { fileOutputStream.close(); } } private File makePathToFile(@Nonnull File rootDir, List pathSegments) { File persistenceFile = rootDir; for (String pathSegment : pathSegments) { persistenceFile = new File(persistenceFile, pathSegment); } if (rootDir.equals(persistenceFile) || persistenceFile.isDirectory()) { throw new IllegalArgumentException(); } return persistenceFile; } protected abstract List directoryFor(K key); protected abstract void persist(K key, V value, OutputStream outputStream) throws IOException; protected abstract V readPersisted(K key, InputStream inputStream) throws IOException; protected abstract boolean isPersist(K key); The implemented methods take care of serializing and deserializing values while synchronizing file access and guaranteeing that streams are closed appropriately. The last four methods remain abstract and are up to the cache's user to implement. The directoryFor(K) method should identify a unique file name for each key. In the easiest case, the toString method of the key's K class is implemented in such a way. Additionally, I made the persist, readPersisted and isPersist methods abstract in order to allow for a custom serialization strategy such as using Kryo. In the easiest scenario, you would use the built in Java functionality which uses ObjectInputStream and ObjectOutputStream. For isPersist, you would return true, assuming that you would only use this implementation if you need serialization. I added this feature to support mixed caches where you can only serialize values to some keys. Be sure not to close the streams within the persist and readPersisted methods since the file system locks rely on the streams to be open. The above implementation will take care of closing the stream for you. Finally, I added some service methods to access the cache. Implementing Guava's Cache interface would of course be a more elegant solution: public V get(K key) { return underlyingCache.getUnchecked(key); } public void put(K key, V value) { underlyingCache.put(key, value); } public void remove(K key) { underlyingCache.invalidate(key); } protected Cache getUnderlyingCache() { return underlyingCache; } Of course, this solution can be further improved. If you use the cache in a concurrent scenario, be further aware that the RemovalListener is, other than most Guava cache method's executed asynchronously. As obvious from the code, I added file locks to avoid read/write conflicts on the file system. This asynchronicity does however imply that there is a small chance that a value entry gets recreated even though there is still a value in memory. If you need to avoid this, be sure to call the underlying cache's cleanUp method within the wrapper's get method. Finally, remember to clean up the file system when you expire your cache. Optimally, you will use a temporary folder of your system for storing your cache entries in order to avoid this problem at all. In the example code, the directory is represented by an instance field named persistenceDirectory which could for example be initialized in the constructor. Update: I wrote a clean implementation of what I described above which you can find on my Git Hub page and on Maven Central. Feel free to use it, if you need to store your cache objects on disk.

The biggest competitor to the Java virtual machine might be Microsoft's CLR that hosts languages such as C#. The CLR allows to write unsafe code as an entry gate for low level programming, something that is hard to achieve on the JVM. If you need such advanced functionality in Java, you might be forced to use the JNI which requires you to know some C and will quickly lead to code that is tightly coupled to a specific platform. With sun.misc.Unsafe, there is however another alternative to low-level programming on the Java plarform using a Java API, even though this alternative is discouraged. Nevertheless, several applications rely on sun.misc.Unsafe such for example objenesis and therewith all libraries that build on the latter such for example kryo which is again used in for example Twitter's Storm. Therefore, it is time to have a look, especially since the functionality of sun.misc.Unsafe is considered to become part of Java's public API in Java 9. Getting hold of an instance of sun.misc.Unsafe The sun.misc.Unsafe class is intended to be only used by core Java classes which is why its authors made its only constructor private and only added an equally private singleton instance. The public getter for this instances performs a security check in order to avoid its public use: public static Unsafe getUnsafe() { Class cc = sun.reflect.Reflection.getCallerClass(2); if (cc.getClassLoader() != null) throw new SecurityException("Unsafe"); return theUnsafe; } This method first looks up the calling Class from the current thread’s method stack. This lookup is implemented by another internal class named sun.reflection.Reflection which is basically browsing down the given number of call stack frames and then returns this method’s defining class. This security check is however likely to change in future version. When browsing the stack, the first found class (index 0) will obviously be the Reflection class itself, and the second (index 1) class will be the Unsafe class such that index 2 will hold your application class that was calling Unsafe#getUnsafe(). This looked-up class is then checked for its ClassLoader where a null reference is used to represent the bootstrap class loader on a HotSpot virtual machine. (This is documented in Class#getClassLoader() where it says that “some implementations may use null to represent the bootstrap class loader”.) Since no non-core Java class is normally ever loaded with this class loader, you will therefore never be able to call this method directly but receive a thrown SecurityException as an answer. (Technically, you could force the VM to load your application classes using the bootstrap class loader by adding it to the –Xbootclasspath, but this would require some setup outside of your application code which you might want to avoid.) Thus, the following test will succeed: @Test(expected = SecurityException.class) public void testSingletonGetter() throws Exception { Unsafe.getUnsafe(); } However, the security check is poorly designed and should be seen as a warning against the singleton anti-pattern. As long as the use of reflection is not prohibited (which is hard since it is so widely used in many frameworks), you can always get hold of an instance by inspecting the private members of the class. From the Unsafe class's source code, you can learn that the singleton instance is stored in a private static field called theUnsafe. This is at least true for the HotSpot virtual machine. Unfortunately for us, other virtual machine implementations sometimes use other names for this field. Android’s Unsafe class is for example storing its singleton instance in a field called THE_ONE. This makes it hard to provide a “compatible” way of receiving the instance. However, since we already left the save territory of compatibility by using the Unsafe class, we should not worry about this more than we should worry about using the class at all. For getting hold of the singleton instance, you simply read the singleton field's value: Field theUnsafe = Unsafe.class.getDeclaredField("theUnsafe"); theUnsafe.setAccessible(true); Unsafe unsafe = (Unsafe) theUnsafe.get(null); Alternatively, you can invoke the private instructor. I do personally prefer this way since it works for example with Android while extracting the field does not: Constructor unsafeConstructor = Unsafe.class.getDeclaredConstructor(); unsafeConstructor.setAccessible(true); Unsafe unsafe = unsafeConstructor.newInstance(); The price you pay for this minor compatibility advantage is a minimal amount of heap space. The security checks performed when using reflection on fields or constructors are however similar. Create an Instance of a Class Without Calling a Constructor The first time I made use of the Unsafe class was for creating an instance of a class without calling any of the class's constructors. I needed to proxy an entire class which only had a rather noisy constructor but I only wanted to delegate all method invocations to a real instance which I did however not know at the time of construction. Creating a subclass was easy and if the class had been represented by an interface, creating a proxy would have been a straight-forward task. With the expensive constructor, I was however stuck. By using the Unsafe class, I was however able to work my way around it. Consider a class with an artificially expensive constructor: class ClassWithExpensiveConstructor { private final int value; private ClassWithExpensiveConstructor() { value = doExpensiveLookup(); } private int doExpensiveLookup() { try { Thread.sleep(2000); } catch (InterruptedException e) { e.printStackTrace(); } return 1; } public int getValue() { return value; } } Using the Unsafe, we can create an instance of ClassWithExpensiveConstructor (or any of its subclasses) without having to invoke the above constructor, simply by allocating an instance directly on the heap: @Test public void testObjectCreation() throws Exception { ClassWithExpensiveConstructor instance = (ClassWithExpensiveConstructor) unsafe.allocateInstance(ClassWithExpensiveConstructor.class); assertEquals(0, instance.getValue()); } Note that final field remained uninitialized by the constructor but is set with its type's default value. Other than that, the constructed instance behaves like a normal Java object. It will for example be garbage collected when it becomes unreachable. The Java run time itself creates objects without calling a constructor when for example creating objects for deserialization. Therefore, the ReflectionFactory offers even more access to individual object creation: @Test public void testReflectionFactory() throws Exception { @SuppressWarnings("unchecked") Constructor silentConstructor = ReflectionFactory.getReflectionFactory() .newConstructorForSerialization(ClassWithExpensiveConstructor.class, Object.class.getConstructor()); silentConstructor.setAccessible(true); assertEquals(10, silentConstructor.newInstance().getValue()); } Note that the ReflectionFactory class only requires a RuntimePermission called reflectionFactoryAccess for receiving its singleton instance and no reflection is therefore required here. The received instance of ReflectionFactory allows you to define any constructor to become a constructor for the given type. In the example above, I used the default constructor of java.lang.Object for this purpose. You can however use any constructor: class OtherClass { private final int value; private final int unknownValue; private OtherClass() { System.out.println("test"); this.value = 10; this.unknownValue = 20; } } @Test public void testStrangeReflectionFactory() throws Exception { @SuppressWarnings("unchecked") Constructor silentConstructor = ReflectionFactory.getReflectionFactory() .newConstructorForSerialization(ClassWithExpensiveConstructor.class, OtherClass.class.getDeclaredConstructor()); silentConstructor.setAccessible(true); ClassWithExpensiveConstructor instance = silentConstructor.newInstance(); assertEquals(10, instance.getValue()); assertEquals(ClassWithExpensiveConstructor.class, instance.getClass()); assertEquals(Object.class, instance.getClass().getSuperclass()); } Note that value was set in this constructor even though the constructor of a completely different class was invoked. Non-existing fields in the target class are however ignored as also obvious from the above example. Note that OtherClass does not become part of the constructed instances type hierarchy, the OtherClass's constructor is simply borrowed for the "serialized" type. Not mentioned in this blog entry are other methods such as Unsafe#defineClass, Unsafe#defineAnonymousClass or Unsafe#ensureClassInitialized. Similar functionality is however also defined in the public API's ClassLoader. Native Memory Allocation Did you ever want to allocate an array in Java that should have had more than Integer.MAX_VALUE entries? Probably not because this is not a common task, but if you once need this functionality, it is possible. You can create such an array by allocating native memory. Native memory allocation is used by for example direct byte buffers that are offered in Java's NIO packages. Other than heap memory, native memory is not part of the heap area and can be used non-exclusively for example for communicating with other processes. As a result, Java's heap space is in competition with the native space: the more memory you assign to the JVM, the less native memory is left. Let us look at an example for using native (off-heap) memory in Java with creating the mentioned oversized array: class DirectIntArray { private final static long INT_SIZE_IN_BYTES = 4; private final long startIndex; public DirectIntArray(long size) { startIndex = unsafe.allocateMemory(size * INT_SIZE_IN_BYTES); unsafe.setMemory(startIndex, size * INT_SIZE_IN_BYTES, (byte) 0); } } public void setValue(long index, int value) { unsafe.putInt(index(index), value); } public int getValue(long index) { return unsafe.getInt(index(index)); } private long index(long offset) { return startIndex + offset * INT_SIZE_IN_BYTES; } public void destroy() { unsafe.freeMemory(startIndex); } } @Test public void testDirectIntArray() throws Exception { long maximum = Integer.MAX_VALUE + 1L; DirectIntArray directIntArray = new DirectIntArray(maximum); directIntArray.setValue(0L, 10); directIntArray.setValue(maximum, 20); assertEquals(10, directIntArray.getValue(0L)); assertEquals(20, directIntArray.getValue(maximum)); directIntArray.destroy(); } First, make sure that your machine has sufficient memory for running this example! You need at least (2147483647 + 1) * 4 byte = 8192 MB of native memory for running the code. If you have worked with other programming languages as for example C, direct memory allocation is something you do every day. By calling Unsafe#allocateMemory(long), the virtual machine allocates the requested amount of native memory for you. After that, it will be your responsibility to handle this memory correctly. The amount of memory that is required for storing a specific value is dependent on the type's size. In the above example, I used an int type which represents a 32-bit integer. Consequently a single int value consumes 4 byte. For primitive types, size is well-documented. It is however more complex to compute the size of object types since they are dependent on the number of non-static fields that are declared anywhere in the type hierarchy. The most canonical way of computing an object's size is using the Instrumented class from Java's attach API which offers a dedicated method for this purpose called getObjectSize. I will however evaluate another (hacky) way of dealing with objects in the end of this section. Be aware that directly allocated memory is always native memory and therefore not garbage collected. You therefore have to free memory explicitly as demonstrated in the above example by a call to Unsafe#freeMemory(long). Otherwise you reserved some memory that can never be used for something else as long as the JVM instance is running what is a memory leak and a common problem in non-garbage collected languages. Alternatively, you can also directly reallocate memory at a certain address by calling Unsafe#reallocateMemory(long, long) where the second argument describes the new amount of bytes to be reserved by the JVM at the given address. Also, note that the directly allocated memory is not initialized with a certain value. In general, you will find garbage from old usages of this memory area such that you have to explicitly initialize your allocated memory if you require a default value. This is something that is normally done for you when you let the Java run time allocate the memory for you. In the above example, the entire area is overriden with zeros with help of the Unsafe#setMemory method. When using directly allocated memory, the JVM will neither do range checks for you. It is therefore possible to corrupt your memory as this example shows: @Test public void testMallaciousAllocation() throws Exception { long address = unsafe.allocateMemory(2L * 4); unsafe.setMemory(address, 8L, (byte) 0); assertEquals(0, unsafe.getInt(address)); assertEquals(0, unsafe.getInt(address + 4)); unsafe.putInt(address + 1, 0xffffffff); assertEquals(0xffffff00, unsafe.getInt(address)); assertEquals(0x000000ff, unsafe.getInt(address + 4)); } Note that we wrote a value into the space that was each partly reserved for the first and for the second number. This picture might clear things up. Be aware that the values in the memory run from the "right to the left" (but this might be machine dependent). The first row shows the initial state after writing zeros to the entire allocated native memory area. Then we override 4 byte with an offset of a single byte using 32 ones. The last row shows the result after this writing operation. Finally, we want to write an entire object into native memory. As mentioned above, this is a difficult task since we first need to compute the size of the object in order to know the amount of size we need to reserve. The Unsafe class does however not offer such functionality. At least not directly since we can at least use the Unsafe class to find the offset of an instance's field which is used by the JVM when itself allocates objects on the heap. This allows us to find the approximate size of an object: public long sizeOf(Class clazz) long maximumOffset = 0; do { for (Field f : clazz.getDeclaredFields()) { if (!Modifier.isStatic(f.getModifiers())) { maximumOffset = Math.max(maximumOffset, unsafe.objectFieldOffset(f)); } } } while ((clazz = clazz.getSuperclass()) != null); return maximumOffset + 8; } This might at first look cryptic, but there is no big secret behind this code. We simply iterate over all non-static fields that are declared in the class itself or in any of its super classes. We do not have to worry about interfaces since those cannot define fields and will therefore never alter an object's memory layout. Any of these fields has an offset which represents the first byte that is occupied by this field's value when the JVM stores an instance of this type in memory, relative to a first byte that is used for this object. We simply have to find the maximum offset in order to find the space that is required for all fields but the last field. Since a field will never occupy more than 64 bit (8 byte) for a long or double value or for an object reference when run on a 64 bit machine, we have at least found an upper bound for the space that is used to store an object. Therefore, we simply add these 8 byte to the maximum index and we will not run into danger of having reserved to little space. This idea is of course wasting some byte and a better algorithm should be used for production code. In this context, it is best to think of a class definition as a form of heterogeneous array. Note that the minimum field offset is not 0 but a positive value. The first few byte contain meta information. The graphic below visualizes this principle for an example object with an int and a long field where both fields have an offset. Note that we do not normally write meta information when writing a copy of an object into native memory so we could further reduce the amount of used native memoy. Also note that this memory layout might be highly dependent on an implementation of the Java virtual machine. With this overly careful estimate, we can now implement some stub methods for writing shallow copies of objects directly into native memory. Note that native memory does not really know the concept of an object. We are basically just setting a given amount of byte to values that reflect an object's current values. As long as we remember the memory layout for this type, these byte contain however enough information to reconstruct this object. public void place(Object o, long address) throws Exception { Class clazz = o.getClass(); do { for (Field f : clazz.getDeclaredFields()) { if (!Modifier.isStatic(f.getModifiers())) { long offset = unsafe.objectFieldOffset(f); if (f.getType() == long.class) { unsafe.putLong(address + offset, unsafe.getLong(o, offset)); } else if (f.getType() == int.class) { unsafe.putInt(address + offset, unsafe.getInt(o, offset)); } else { throw new UnsupportedOperationException(); } } } } while ((clazz = clazz.getSuperclass()) != null); } public Object read(Class clazz, long address) throws Exception { Object instance = unsafe.allocateInstance(clazz); do { for (Field f : clazz.getDeclaredFields()) { if (!Modifier.isStatic(f.getModifiers())) { long offset = unsafe.objectFieldOffset(f); if (f.getType() == long.class) { unsafe.putLong(instance, offset, unsafe.getLong(address + offset)); } else if (f.getType() == int.class) { unsafe.putLong(instance, offset, unsafe.getInt(address + offset)); } else { throw new UnsupportedOperationException(); } } } } while ((clazz = clazz.getSuperclass()) != null); return instance; } @Test public void testObjectAllocation() throws Exception { long containerSize = sizeOf(Container.class); long address = unsafe.allocateMemory(containerSize); Container c1 = new Container(10, 1000L); Container c2 = new Container(5, -10L); place(c1, address); place(c2, address + containerSize); Container newC1 = (Container) read(Container.class, address); Container newC2 = (Container) read(Container.class, address + containerSize); assertEquals(c1, newC1); assertEquals(c2, newC2); } Note that these stub methods for writing and reading objects in native memory only support int and long field values. Of course, Unsafe supports all primitive values and can even write values without hitting thread-local caches by using the volatile forms of the methods. The stubs were only used to keep the examples concise. Be aware that these "instances" would never get garbage collected since their memory was allocated directly. (But maybe this is what you want.) Also, be careful when precalculating size since an object's memory layout might be VM dependent and also alter if a 64-bit machine runs your code compared to a 32-bit machine. The offsets might even change between JVM restarts. For reading and writing primitives or object references, Unsafe provides the following type-dependent methods: getXXX(Object target, long offset): Will read a value of type XXX from target's address at the specified offset. putXXX(Object target, long offset, XXX value): Will place value at target's address at the specified offset. getXXXVolatile(Object target, long offset): Will read a value of type XXX from target's address at the specified offset and not hit any thread local caches. putXXXVolatile(Object target, long offset, XXX value): Will place value at target's address at the specified offset and not hit any thread local caches. putOrderedXXX(Object target, long offset, XXX value): Will place value at target's address at the specified offet and might not hit all thread local caches. putXXX(long address, XXX value): Will place the specified value of type XXX directly at the specified address. getXXX(long address): Will read a value of type XXX from the specified address. compareAndSwapXXX(Object target, long offset, long expectedValue, long value): Will atomicly read a value of type XXX from target's address at the specified offset and set the given value if the current value at this offset equals the expected value. Be aware that you are copying references when writing or reading object copies in native memory by using the getObject(Object, long) method family. You are therefore only creating shallow copies of instances when applying the above method. You could however always read object sizes and offsets recursively and create deep copies. Pay however attention for cyclic object references which would cause infinitive loops when applying this principle carelessly. Not mentioned here are existing utilities in the Unsafe class that allow manipulation of static field values sucht as staticFieldOffset and for handling array types. Finally, both methods named Unsafe#copyMemory allow to instruct a direct copy of memory, either relative to a specific object offset or at an absolute address as the following example shows: @Test public void testCopy() throws Exception { long address = unsafe.allocateMemory(4L); unsafe.putInt(address, 100); long otherAddress = unsafe.allocateMemory(4L); unsafe.copyMemory(address, otherAddress, 4L); assertEquals(100, unsafe.getInt(otherAddress)); } Throwing Checked Exceptions Without Declaration There are some other interesting methods to find in Unsafe. Did you ever want to throw a specific exception to be handled in a lower layer but you high layer interface type did not declare this checked exception? Unsafe#throwException allows to do so: @Test(expected = Exception.class) public void testThrowChecked() throws Exception { throwChecked(); } public void throwChecked() { unsafe.throwException(new Exception()); } Native Concurrency The park and unpark methods allow you to pause a thread for a certain amount of time and to resume it: @Test public void testPark() throws Exception { final boolean[] run = new boolean[1]; Thread thread = new Thread() { @Override public void run() { unsafe.park(true, 100000L); run[0] = true; } }; thread.start(); unsafe.unpark(thread); thread.join(100L); assertTrue(run[0]); } Also, monitors can be acquired directly by using Unsafe using monitorEnter(Object), monitorExit(Object) and tryMonitorEnter(Object). A file containing all the examples of this blog entry is available as a gist.

Our best option is to create some pre-processing tool that will first split the big file in multiple smaller chunks before they are processed by the middle-ware.

Introduction Some time ago we decided to upgrade our application from JBoss 5 to 7 (technically 7.2). In this article I going to describe several things which we found problematic. At the end I also provided a short list of benefits we gained in retrospect. First some general information about our application. It was built using EJB 3.0 technology. We have 2 interfaces for communicating with other components – JMS and JAX-WS. We use JBoss AS 5 as our messaging broker which is started as a separate JVM process. This part of the system we were not allowed to change. Finally – we use JPA to store processing results to Oracle DB. Step #1 – Convince your Product Owner Although our application was rather small and built on JEE5 standard it took us 4 weeks to migrate it to JEE6 and JBoss 7. So you can't do it as a maintenance ticket – it's simply too big. There is always problem with providing Business Value of such migration for Product Owners as well as for key Stakeholders. There are several aspects which might help you convincing them. One of the biggest benefits is processing time. JBoss 7 is simply faster and has better caching (Infinispan over Ehcache). Another one is startup time (our server is ready to go in 5-6 seconds opposed to 1 minute in JBoss 5). Finally – development is much faster (EJB 3.1 is much better then 3.0). The last one might be translated to “time to market”. Having above arguments I'm pretty sure you'll convince them. Step #2 – Do some reading Here is a list on interesting links which are worth reading before the migration: JBoss 5 -> 7 migration guide: https://docs.jboss.org/author/display/AS7/How+do+I+migrate+my+application+from+AS5+or+AS6+to+AS7 JBoss 7 vs EAP libraries: https://access.redhat.com/site/articles/112673 JBoss EAP Faq: http://www.jboss.org/jbossas/faq Cache implementation benchmarks: http://sourceforge.net/p/nitrocache/blog/2012/05/performance-benchmark-nitrocache--ehcache--infinispan--jcs--cach4j/ JBoss 7 performence tuning: http://www.mastertheboss.com/jboss-performance/jboss-as-7-performance-tuning JBoss caching: http://www.mastertheboss.com/hibernate-howto/using-hibernate-second-level-cache-with-jboss-as-5-6-7 Step #3 – Off you go – change Maven dependencies JBoss 5 isn't packaged very well, so I suppose you many dependencies included in your classpath (either directly or by transitive dependencies). This is the first big change in JBoss 7. Now I strongly advice you to use this artifact in your dependency management section: org.jboss.as jboss-as-parent 7.2.0.Final pom import We also decided to stick only to JEE6 spec and configure all additional JBoss 7 options with proper XML files. If it sounds good for your project too, just add this dependency and you're done with this step: org.jboss.spec jboss-javaee-6.0 1.0.0.Final pom provided After cleaning up dependencies your code probably won't compile for a couple of days or even weeks. It takes time to clean this up. Step #4 – EJB 3.0 to 3.1 migration Dependency Injection is a heart of the application, so it is worth to start with it. Almost all of your code should work, but you'll have some problems with beans annotated with @Service (these are singletons with JBoss 5 EJB Extended API). You just need to replace them with @Singleton annotations and put @PostConstruct annotation on your init method. One last thing – remember to use proper concurrency strategy. We decided to use @ConcurrencyManagement(BEAN) and leave the implementation as is. Step #5 – Upgrade to JPA 2.0 If you used JPA 1.0 with Hibernate, I'm pretty sure you have a lot of non standard annotations defining caching or cascading. All of them might be successfully replaced with JPA 2.0 annotations and finally you might get rid of Hibernate from compile classpath and depend only on JPA 2.0. Here are several standard things to do: Get rid of Hibernate's Session.evict and switch to EntityManager.detach Get rid of Hibernate's @Cache annotation and replace it with @Cachable Fix Cascades (now delete orphan is a part of @XXXToYYY annotations) Remove Hibernate dependency and stick with JEE6 spec Step #6 – Fix Hibernate's sequencer Migrating Hibernate 3 to 4 is a bit tricky because of the way it uses sequences (fields annotated with @Id). Hibernate by default uses a pool of ids instead of incrementing sequence. An example will be more descriptive: Some_DB_Sequence.nextval -> 1 Hibernate 3: 1*50 = 50; IDs to be used = 50, 51, 52.…, 99 Some_DB_Sequence.nextval -> 2 Hibernate 3: 2*50 = 100; IDs to be used = 100, 101, 102.…, 149 In Hibernate 4.x there is a new sequence generator that uses new IDs that are 1:1 related to DB sequence. Typically it's disabled by default... but not in JBoss 7.1. So after migration, Hibernate tries to insert entities using IDs read from sequence (using new sequence generator) that were already used which causes constraint violation. The fastest solution is to switch Hibernate to the old method of sequence generation (described in example above), that requires following change in persistence.xml: Step #7 – Caching Infinispan is shipped with JBoss 7 and does not require much configuration. There is only one setting in persistence.xml which needs to be set and the others might be removed: Infinispan itself might require some extra configuration – just use standalone-full-ha.xml as guide. Step #8 – RMI with JBoss 5 If you're using a lot of RMI communicating with other JBoss 5 servers – I have bad information for you – JBoss 5 and 7 are totally different and this kind of comminication will not work. I strongly recommend to switch to some other technology like JAX-WS. In the retrospect we are very glad we decided to do it. Step #9 – JMS migration We thought it would be really hard to connect with JMS server based on JBoss 5. It turned out that you have 2 options and both work fine: Start HornetQ server on your own instance and create a bridge to JBoss 5 instance Use Generic JMS adapter: https://github.com/jms-ra/generic-jms-ra Step #10 – Fix EAR layout In JBoss 5 it does not matter where all jars are being placed. All EJBs are being started. It does not work with JBoss 7 anymore. All EJB which should start must be added as modules. Step #11 – JMX console Bad information – it's not present in JBoss 7. We liked it very much, but we had to switch to jvisualvm to invoke our JMX operations. There is a ticket in WildFly Jira opened for that: https://issues.jboss.org/browse/WFLY-1197. Unfortunately at moment of writing this article it is not resolved. Some thoughts in retrospect It is really time consuming task to migrate from JBoss 5 to 7. Although in my opinion it is worth it. Now we have better caching for cluster solutions (Infinispan), better DI (EJB 3.1) and better Web Services (CXF instead of JBoss WS). Processing time decreased by 25% without any code change. Development speed increased in my opinion (it is really hard to measure it) by 50% and we are much more productive (faster server restarts). Memory footprint lowered from 1GB to 512MB. Finally automatic application redeployment finally works! However there is always a price to pay – the migration took us 4 weeks (2 sprints). We didn't write any code for our business in that period. So make sure you prepare well for such migration and my last advice – invest some time to write good automatic functional tests (we use Arquillian for that). Once they're green again – you're almost crossing finishing line.

Learn more about creating Java-based WebSocket clients, including code for the server side WebSocket application and the corresponding JavaScript/HTML client.

The byte code instrumentation library cglib is a popular choice among many well-known Java frameworks such as Hibernate (not anymore) or Spring for doing their dirty work. Byte code instrumentation allows to manipulate or to create classes after the compilation phase of a Java application. Since Java classes are linked dynamically at run time, it is possible to add new classes to an already running Java program. Hibernate uses cglib for example for its generation of dynamic proxies. Instead of returning the full object that you stored in a a database, Hibernate will return you an instrumented version of your stored class that lazily loads some values from the database only when they are requested. Spring used cglib for example when adding security constraints to your method calls. Instead of calling your method directly, Spring security will first check if a specified security check passes and only delegate to your actual method after this verification. Another popular use of cglib is within mocking frameworks such as mockito, where mocks are nothing more than instrumented class where the methods were replaced with empty implementations (plus some tracking logic). Other than ASM - another very high-level byte code manipulation library on top of which cglib is built - cglib offers rather low-level byte code transformers that can be used without even knowing about the details of a compiled Java class. Unfortunately, the documentation of cglib is rather short, not to say that there is basically none. Besides a single blog article from 2005 that demonstrates the Enhancer class, there is not much to find. This blog article is an attempt to demonstrate cglib and its unfortunately often awkward API. Enhancer Let's start with the Enhancer class, the probably most used class of the cglib library. An enhancer allows the creation of Java proxies for non-interface types. The Enhancer can be compared with the Java standard library's Proxy class which was introduced in Java 1.3. The Enhancer dynamically creates a subclass of a given type but intercepts all method calls. Other than with the Proxy class, this works for both class and interface types. The following example and some of the examples after are based on this simple Java POJO: public class SampleClass { public String test(String input) { return "Hello world!"; } } Using cglib, the return value of test(String) method can easily be replaced by another value using an Enhancer and a FixedValue callback: @Test public void testFixedValue() throws Exception { Enhancer enhancer = new Enhancer(); enhancer.setSuperclass(SampleClass.class); enhancer.setCallback(new FixedValue() { @Override public Object loadObject() throws Exception { return "Hello cglib!"; } }); SampleClass proxy = (SampleClass) enhancer.create(); assertEquals("Hello cglib!", proxy.test(null)); } In the above example, the enhancer will return an instance of an instrumented subclass of SampleClass where all method calls return a fixed value which is generated by the anonymous FixedValue implementation above. The object is created by Enhancer#create(Object...) where the method takes any number of arguments which are used to pick any constructor of the enhanced class. (Even though constructors are only methods on the Java byte code level, the Enhancer class cannot instrument constructors. Neither can it instrument static or final classes.) If you only want to create a class, but no instance, Enhancer#createClass will create a Class instance which can be used to create instances dynamically. All constructors of the enhanced class will be available as delegation constructors in this dynamically generated class. Be aware that any method call will be delegated in the above example, also calls to the methods defined in java.lang.Object. As a result, a call to proxy.toString() will also return "Hello cglib!". In contrast will a call to proxy.hashCode() result in a ClassCastException since the FixedValue interceptor always returns a String even though the Object#hashCode signature requires a primitive integer. Another observation that can be made is that final methods are not intercepted. An example of such a method is Object#getClass which will return something like "SampleClass$$EnhancerByCGLIB$$e277c63c" when it is invoked. This class name is generated randomly by cglib in order to avoid naming conflicts. Be aware of the different class of the enhanced instance when you are making use of explicit types in your program code. The class generated by cglib will however be in the same package as the enhanced class (and therefore be able to override package-private methods). Similar to final methods, the subclassing approach makes for the inability of enhancing final classes. Therefore frameworks as Hibernate cannot persist final classes. Next, let us look at a more powerful callback class, the InvocationHandler, that can also be used with an Enhancer: @Test public void testInvocationHandler() throws Exception { Enhancer enhancer = new Enhancer(); enhancer.setSuperclass(SampleClass.class); enhancer.setCallback(new InvocationHandler() { @Override public Object invoke(Object proxy, Method method, Object[] args) throws Throwable { if(method.getDeclaringClass() != Object.class && method.getReturnType() == String.class) { return "Hello cglib!"; } else { throw new RuntimeException("Do not know what to do."); } } }); SampleClass proxy = (SampleClass) enhancer.create(); assertEquals("Hello cglib!", proxy.test(null)); assertNotEquals("Hello cglib!", proxy.toString()); } This callback allows us to answer with regards to the invoked method. However, you should be careful when calling a method on the proxy object that comes with the InvocationHandler#invoke method. All calls on this method will be dispatched with the same InvocationHandler and might therefore result in an endless loop. In order to avoid this, we can use yet another callback dispatcher: @Test public void testMethodInterceptor() throws Exception { Enhancer enhancer = new Enhancer(); enhancer.setSuperclass(SampleClass.class); enhancer.setCallback(new MethodInterceptor() { @Override public Object intercept(Object obj, Method method, Object[] args, MethodProxy proxy) throws Throwable { if(method.getDeclaringClass() != Object.class && method.getReturnType() == String.class) { return "Hello cglib!"; } else { proxy.invokeSuper(obj, args); } } }); SampleClass proxy = (SampleClass) enhancer.create(); assertEquals("Hello cglib!", proxy.test(null)); assertNotEquals("Hello cglib!", proxy.toString()); proxy.hashCode(); // Does not throw an exception or result in an endless loop. } The MethodInterceptor allows full control over the intercepted method and offers some utilities for calling the method of the enhanced class in their original state. But why would one want to use other methods anyways? Because the other methods are more efficient and cglib is often used in edge case frameworks where efficiency plays a significant role. The creation and linkage of the MethodInterceptor requires for example the generation of a different type of byte code and the creation of some runtime objects that are not required with the InvocationHandler. Because of that, there are other classes that can be used with the Enhancer: LazyLoader: Even though the LazyLoader's only method has the same method signature as FixedValue, the LazyLoader is fundamentally different to the FixedValue interceptor. The LazyLoader is actually supposed to return an instance of a subclass of the enhanced class. This instance is requested only when a method is called on the enhanced object and then stored for future invocations of the generated proxy. This makes sense if your object is expensive in its creation without knowing if the object will ever be used. Be aware that some constructor of the enhanced class must be called both for the proxy object and for the lazily loaded object. Thus, make sure that there is another cheap (maybe protected) constructor available or use an interface type for the proxy. You can choose the invoked constructed by supplying arguments to Enhancer#create(Object...). Dispatcher: The Dispatcher is like the LazyLoader but will be invoked on every method call without storing the loaded object. This allows to change the implementation of a class without changing the reference to it. Again, be aware that some constructor must be called for both the proxy and the generated objects. ProxyRefDispatcher: This class carries a reference to the proxy object it is invoked from in its signature. This allows for example to delegate method calls to another method of this proxy. Be aware that this can easily cause an endless loop and will always cause an endless loop if the same method is called from within ProxyRefDispatcher#loadObject(Object). NoOp: The NoOp class does not what its name suggests. Instead, it delegates each method call to the enhanced class's method implementation. At this point, the last two interceptors might not make sense to you. Why would you even want to enhance a class when you will always delegate method calls to the enhanced class anyways? And you are right. These interceptors should only be used together with a CallbackFilter as it is demonstrated in the following code snippet: @Test public void testCallbackFilter() throws Exception { Enhancer enhancer = new Enhancer(); CallbackHelper callbackHelper = new CallbackHelper(SampleClass.class, new Class[0]) { @Override protected Object getCallback(Method method) { if(method.getDeclaringClass() != Object.class && method.getReturnType() == String.class) { return new FixedValue() { @Override public Object loadObject() throws Exception { return "Hello cglib!"; }; } } else { return NoOp.INSTANCE; // A singleton provided by NoOp. } } }; enhancer.setSuperclass(MyClass.class); enhancer.setCallbackFilter(callbackHelper); enhancer.setCallbacks(callbackHelper.getCallbacks()); SampleClass proxy = (SampleClass) enhancer.create(); assertEquals("Hello cglib!", proxy.test(null)); assertNotEquals("Hello cglib!", proxy.toString()); proxy.hashCode(); // Does not throw an exception or result in an endless loop. } The Enhancer instance accepts a CallbackFilter in its Enhancer#setCallbackFilter(CallbackFilter) method where it expects methods of the enhanced class to be mapped to array indices of an array of Callback instances. When a method is invoked on the created proxy, the Enhancer will then choose the according interceptor and dispatch the called method on the corresponding Callback (which is a marker interface for all the interceptors that were introduced so far). To make this API less awkward, cglib offers a CallbackHelper which will represent a CallbackFilter and which can create an array of Callbacks for you. The enhanced object above will be functionally equivalent to the one in the example for the MethodInterceptor but it allows you to write specialized interceptors whilst keeping the dispatching logic to these interceptors separate. How does it work? When the Enhancer creates a class, it will set create a privatestatic field for each interceptor that was registered as a Callback for the enhanced class after its creation. This also means that class definitions that were created with cglib cannot be reused after their creation since the registration of callbacks does not become a part of the generated class's initialization phase but are prepared manually by cglib after the class was already initialized by the JVM. This also means that classes created with cglib are not technically ready after their initialization and for example cannot be sent over the wire since the callbacks would not exist for the class loaded in the target machine. Depending on the registered interceptors, cglib might register additional fields such as for example for the MethodInterceptor where two privatestatic fields (one holding a reflective Method and a the other holding MethodProxy) are registered per method that is intercepted in the enhanced class or any of its subclasses. Be aware that the MethodProxy is making excessive use of the FastClass which triggers the creation of additional classes and is described in further detail below. For all these reasons, be careful when using the Enhancer. And always register callback types defensively, since the MethodInterceptor will for example trigger the creation of additional classes and register additional static fields in the enhanced class. This is specifically dangerous since the callback variables are also stored as static variables in the enhanced class: This implies that the callback instances are never garbage collected (unless their ClassLoader is, what is unusual). This is in particular dangerous when using anonymous classes which silently carry a reference to their outer class. Recall the example above: @Test public void testFixedValue() throws Exception { Enhancer enhancer = new Enhancer(); enhancer.setSuperclass(SampleClass.class); enhancer.setCallback(new FixedValue() { @Override public Object loadObject() throws Exception { return "Hello cglib!"; } }); SampleClass proxy = (SampleClass) enhancer.create(); assertEquals("Hello cglib!", proxy.test(null)); } The anonymous subclass of FixedValue would become hardly referenced from the enhanced SampleClass such that neither the anonymous FixedValue instance or the class holding the @Test method would ever be garbage collected. This can introduce nasty memory leaks in your applications. Therefore, do not use non-static inner classes with cglib. (I only use them in this blog entry for keeping the examples short.) Finally, you should never intercept Object#finalize(). Due to the subclassing approach of cglib, intercepting finalize is implemented by overriding it what is in general a bad idea. Enhanced instances that intercept finalize will be treated differently by the garbage collector and will also cause these objects being queued in the JVM's finalization queue. Also, if you (accidentally) create a hard reference to the enhanced class in your intercepted call to finalize, you have effectively created an noncollectable instance. This is in general nothing you want. Note that final methods are never intercepted by cglib. Thus, Object#wait, Object#notify and Object#notifyAll do not impose the same problems. Be however aware that Object#clone can be intercepted what is something you might not want to do. Immutable Bean cglib's ImmutableBean allows you to create an immutability wrapper similar to for example Collections#immutableSet. All changes of the underlying bean will be prevented by an IllegalStateException (however, not by an UnsupportedOperationException as recommended by the Java API). Looking at some bean public class SampleBean { private String value; public String getValue() { return value; } public void setValue(String value) { this.value = value; } } we can make this bean immutable: @Test(expected = IllegalStateException.class) public void testImmutableBean() throws Exception { SampleBean bean = new SampleBean(); bean.setValue("Hello world!"); SampleBean immutableBean = (SampleBean) ImmutableBean.create(bean); assertEquals("Hello world!", immutableBean.getValue()); bean.setValue("Hello world, again!"); assertEquals("Hello world, again!", immutableBean.getValue()); immutableBean.setValue("Hello cglib!"); // Causes exception. } As obvious from the example, the immutable bean prevents all state changes by throwing an IllegalStateException. However, the state of the bean can be changed by changing the original object. All such changes will be reflected by the ImmutableBean. Bean Generator The BeanGenerator is another bean utility of cglib. It will create a bean for you at run time: @Test public void testBeanGenerator() throws Exception { BeanGenerator beanGenerator = new BeanGenerator(); beanGenerator.addProperty("value", String.class); Object myBean = beanGenerator.create(); Method setter = myBean.getClass().getMethod("setValue", String.class); setter.invoke(myBean, "Hello cglib!"); Method getter = myBean.getClass().getMethod("getValue"); assertEquals("Hello cglib!", getter.invoke(myBean)); } As obvious from the example, the BeanGenerator first takes some properties as name value pairs. On creation, the BeanGenerator creates the accessors get() void set() for you. This might be useful when another library expects beans which it resolved by reflection but you do not know these beans at run time. (An example would be Apache Wicket which works a lot with beans.) Bean Copier The BeanCopier is another bean utility that copies beans by their property values. Consider another bean with similar properties as SampleBean: public class OtherSampleBean { private String value; public String getValue() { return value; } public void setValue(String value) { this.value = value; } } Now you can copy properties from one bean to another: @Test public void testBeanCopier() throws Exception { BeanCopier copier = BeanCopier.create(SampleBean.class, OtherSampleBean.class, false); SampleBean bean = new SampleBean(); myBean.setValue("Hello cglib!"); OtherSampleBean otherBean = new OtherSampleBean(); copier.copy(bean, otherBean, null); assertEquals("Hello cglib!", otherBean.getValue()); } without being restrained to a specific type. The BeanCopier#copy mehtod takles an (eventually) optional Converter which allows to do some further manipulations on each bean property. If the BeanCopier is created with false as the third constructor argument, the Converter is ignored and can therefore be null. Bulk Bean A BulkBean allows to use a specified set of a bean's accessors by arrays instead of method calls: @Test public void testBulkBean() throws Exception { BulkBean bulkBean = BulkBean.create(SampleBean.class, new String[]{"getValue"}, new String[]{"setValue"}, new Class[]{String.class}); SampleBean bean = new SampleBean(); bean.setValue("Hello world!"); assertEquals(1, bulkBean.getPropertyValues(bean).length); assertEquals("Hello world!", bulkBean.getPropertyValues(bean)[0]); bulkBean.setPropertyValues(bean, new Object[] {"Hello cglib!"}); assertEquals("Hello cglib!", bean.getValue()); } The BulkBean takes an array of getter names, an array of setter names and an array of property types as its constructor arguments. The resulting instrumented class can then extracted as an array by BulkBean#getPropertyBalues(Object). Similarly, a bean's properties can be set by BulkBean#setPropertyBalues(Object, Object[]). Bean Map This is the last bean utility within the cglib library. The BeanMap converts all properties of a bean to a String-to-Object Java Map: @Test public void testBeanGenerator() throws Exception { SampleBean bean = new SampleBean(); BeanMap map = BeanMap.create(bean); bean.setValue("Hello cglib!"); assertEquals("Hello cglib", map.get("value")); } Additionally, the BeanMap#newInstance(Object) method allows to create maps for other beans by reusing the same Class. Key Factory The KeyFactory factory allows the dynamic creation of keys that are composed of multiple values that can be used in for example Map implementations. For doing so, the KeyFactory requires some interface that defines the values that should be used in such a key. This interface must contain a single method by the name newInstance that returns an Object. For example: public interface SampleKeyFactory { Object newInstance(String first, int second); } Now an instance of a a key can be created by: @Test public void testKeyFactory() throws Exception { SampleKeyFactory keyFactory = (SampleKeyFactory) KeyFactory.create(Key.class); Object key = keyFactory.newInstance("foo", 42); Map map = new HashMap(); map.put(key, "Hello cglib!"); assertEquals("Hello cglib!", map.get(keyFactory.newInstance("foo", 42))); } The KeyFactory will assure the correct implementation of the Object#equals(Object) and Object#hashCode methods such that the resulting key objects can be used in a Map or a Set. The KeyFactory is also used quite a lot internally in the cglib library. Mixin Some might already know the concept of the Mixin class from other programing languages such as Ruby or Scala (where mixins are called traits). cglib Mixins allow the combination of several objects into a single object. However, in order to do so, those objects must be backed by interfaces: public interface Interface1 { String first(); } public interface Interface2 { String second(); } public class Class1 implements Interface1 { @Override public String first() { return "first"; } } public class Class2 implements Interface2 { @Override public String second() { return "second"; } } Now the classes Class1 and Class2 can be combined to a single class by an additional interface: public interface MixinInterface extends Interface1, Interface2 { /* empty */ } @Test public void testMixin() throws Exception { Mixin mixin = Mixin.create(new Class[]{Interface1.class, Interface2.class MixinInterface.class}, new Object[]{new Class1(), new Class2()}); MixinInterface mixinDelegate = (MixinInterface) mixin; assertEquals("first", mixinDelegate.first()); assertEquals("second", mixinDelegate.second()); } Admittedly, the Mixin API is rather awkward since it requires the classes used for a mixin to implement some interface such that the problem could also be solved by non-instrumented Java. String Switcher The StringSwitcher emulates a String to int Java Map: @Test public void testStringSwitcher() throws Exception { String[] strings = new String[]{"one", "two"}; int[] values = new int[]{10, 20}; StringSwitcher stringSwitcher = StringSwitcher.create(strings, values, true); assertEquals(10, stringSwitcher.intValue("one")); assertEquals(20, stringSwitcher.intValue("two")); assertEquals(-1, stringSwitcher.intValue("three")); } The StringSwitcher allows to emulate a switch command on Strings such as it is possible with the built-in Java switch statement since Java 7. If using the StringSwitcher in Java 6 or less really adds a benefit to your code remains however doubtful and I would personally not recommend its use. Interface Maker The InterfaceMaker does what its name suggests: It dynamically creates a new interface. @Test public void testInterfaceMaker() throws Exception { Signature signature = new Signature("foo", Type.DOUBLE_TYPE, new Type[]{Type.INT_TYPE}); InterfaceMaker interfaceMaker = new InterfaceMaker(); interfaceMaker.add(signature, new Type[0]); Class iface = interfaceMaker.create(); assertEquals(1, iface.getMethods().length); assertEquals("foo", iface.getMethods()[0].getName()); assertEquals(double.class, iface.getMethods()[0].getReturnType()); } Other than any other class of cglib's public API, the interface maker relies on ASM types. The creation of an interface in a running application will hardly make sense since an interface only represents a type which can be used by a compiler to check types. It can however make sense when you are generating code that is to be used in later development. Method Delegate A MethodDelegate allows to emulate a C#-like delegate to a specific method by binding a method call to some interface. For example, the following code would bind the SampleBean#getValue method to a delegate: public interface BeanDelegate { String getValueFromDelegate(); } @Test public void testMethodDelegate() throws Exception { SampleBean bean = new SampleBean(); bean.setValue("Hello cglib!"); BeanDelegate delegate = (BeanDelegate) MethodDelegate.create( bean, "getValue", BeanDelegate.class); assertEquals("Hello world!", delegate.getValueFromDelegate()); } There are however some things to note: The factory method MethodDelegate#create takes exactly one method name as its second argument. This is the method the MethodDelegate will proxy for you. There must be a method without arguments defined for the object which is given to the factory method as its first argument. Thus, the MethodDelegate is not as strong as it could be. The third argument must be an interface with exactly one argument. The MethodDelegate implements this interface and can be cast to it. When the method is invoked, it will call the proxied method on the object that is the first argument. Furthermore, consider these drawbacks: cglib creates a new class for each proxy. Eventually, this will litter up your permanent generation heap space You cannot proxy methods that take arguments. If your interface takes arguments, the method delegation will simply not work without an exception thrown (the return value will always be null). If your interface requires another return type (even if that is more general), you will get a IllegalArgumentException. Multicast Delegate The MulticastDelegate works a little different than the MethodDelegate even though it aims at similar functionality. For using the MulticastDelegate, we require an object that implements an interface: public interface DelegatationProvider { void setValue(String value); } public class SimpleMulticastBean implements DelegatationProvider { private String value; public String getValue() { return value; } public void setValue(String value) { this.value = value; } } Based on this interface-backed bean we can create a MulticastDelegate that dispatches all calls to setValue(String) to several classes that implement the DelegationProvider interface: @Test public void testMulticastDelegate() throws Exception { MulticastDelegate multicastDelegate = MulticastDelegate.create( DelegatationProvider.class); SimpleMulticastBean first = new SimpleMulticastBean(); SimpleMulticastBean second = new SimpleMulticastBean(); multicastDelegate = multicastDelegate.add(first); multicastDelegate = multicastDelegate.add(second); DelegatationProvider provider = (DelegatationProvider)multicastDelegate; provider.setValue("Hello world!"); assertEquals("Hello world!", first.getValue()); assertEquals("Hello world!", second.getValue()); } Again, there are some drawbacks: The objects need to implement a single-method interface. This sucks for third-party libraries and is awkward when you use CGlib to do some magic where this magic gets exposed to the normal code. Also, you could implement your own delegate easily (without byte code though but I doubt that you win so much over manual delegation). When your delegates return a value, you will receive only that of the last delegate you added. All other return values are lost (but retrieved at some point by the multicast delegate). Constructor Delegate A ConstructorDelegate allows to create a byte-instrumented factory method. For that, that we first require an interface with a single method newInstance which returns an Object and takes any amount of parameters to be used for a constructor call of the specified class. For example, in order to create a ConstructorDelegate for the SampleBean, we require the following to call SampleBean's default (no-argument) constructor: public interface SampleBeanConstructorDelegate { Object newInstance(); } @Test public void testConstructorDelegate() throws Exception { SampleBeanConstructorDelegate constructorDelegate = (SampleBeanConstructorDelegate) ConstructorDelegate.create( SampleBean.class, SampleBeanConstructorDelegate.class); SampleBean bean = (SampleBean) constructorDelegate.newInstance(); assertTrue(SampleBean.class.isAssignableFrom(bean.getClass())); } Parallel Sorter The ParallelSorter claims to be a faster alternative to the Java standard library's array sorters when sorting arrays of arrays: @Test public void testParallelSorter() throws Exception { Integer[][] value = { {4, 3, 9, 0}, {2, 1, 6, 0} }; ParallelSorter.create(value).mergeSort(0); for(Integer[] row : value) { int former = -1; for(int val : row) { assertTrue(former < val); former = val; } } } The ParallelSorter takes an array of arrays and allows to either apply a merge sort or a quick sort on every row of the array. Be however careful when you use it: When using arrays of primitives, you have to call merge sort with explicit sorting ranges (e.g. ParallelSorter.create(value).mergeSort(0, 0, 3) in the example. Otherwise, the ParallelSorter has a pretty obvious bug where it tries to cast the primitive array to an array Object[] what will cause a ClassCastException. If the array rows are uneven, the first argument will determine the length of what row to consider. Uneven rows will either lead to the extra values not being considered for sorting or a ArrayIndexOutOfBoundException. Personally, I doubt that the ParallelSorter really offers a time advantage. Admittedly, I did however not yet try to benchmark it. If you tried it, I'd be happy to hear about it in the comments. Fast Class and Fast Members The FastClass promises a faster invocation of methods than the Java reflection API by wrapping a Java class and offering similar methods to the reflection API: @Test public void testFastClass() throws Exception { FastClass fastClass = FastClass.create(SampleBean.class); FastMethod fastMethod = fastClass.getMethod(SampleBean.class.getMethod("getValue")); MyBean myBean = new MyBean(); myBean.setValue("Hello cglib!"); assertTrue("Hello cglib!", fastMethod.invoke(myBean, new Object[0])); } Besides the demonstrated FastMethod, the FastClass can also create FastConstructors but no fast fields. But how can the FastClass be faster than normal reflection? Java reflection is executed by JNI where method invocations are executed by some C-code. The FastClass on the other side creates some byte code that calls the method directly from within the JVM. However, the newer versions of the HotSpot JVM (and probably many other modern JVMs) know a concept called inflation where the JVM will translate reflective method calls into native version's of FastClass when a reflective method is executed often enough. You can even control this behavior (at least on a HotSpot JVM) with setting the sun.reflect.inflationThreshold property to a lower value. (The default is 15.) This property determines after how many reflective invocations a JNI call should be substituted by a byte code instrumented version. I would therefore recommend to not use FastClass on modern JVMs, it can however fine-tune performance on older Java virtual machines. cglib Proxy The cglib Proxy is a reimplementation of the Java Proxy class mentioned in the beginning of this article. It is intended to allow using the Java library's proxy in Java versions before Java 1.3 and differs only in minor details. The better documentation of the cglib Proxy can however be found in the Java standard library's Proxy javadoc where an example of its use is provided. For this reason, I will skip a more detailed discussion of the cglib's Proxy at this place. A Final Word of Warning After this overview of cglib's functionality, I want to speak a final word of warning. All cglib classes generate byte code which results in additional classes being stored in a special section of the JVM's memory: The so called perm space. This permanent space is, as the name suggests, used for permanent objects that do not usually get garbage collected. This is however not completely true: Once a Class is loaded, it cannot be unloaded until the loading ClassLoader becomes available for garbage collection. This is only the case the Class was loaded with a custom ClassLoader which is not a native JVM system ClassLoader. This ClassLoader can be garbage collected if itself, all Classes it ever loaded and all instances of all Classes it ever loaded become available for garbage collection. This means: If you create more and more classes throughout the life of a Java application and if you do not take care of the removal of these classes, you will sooner or later run of of perm space what will result in your application's death by the hands of an OutOfMemoryError. Therefore, use cglib sparingly. However, if you use cglib wisely and carefully, you can really do amazing things with it that go beyond what you can do with non-instrumented Java applications. Lastly, when creating projects that depend on cglib, you should be aware of the fact that the cglib project is not as well maintained and active as it should be, considering its popularity. The missing documentation is a first hint. The often messy public API a second. But then there are also broken deploys of cglib to Maven central. The mailing list reads like an archive of spam messages. And the release cycles are rather unstable. You might therefore want to have a look at javassist, the only real low-level alternative to cglib. Javassist comes bundled with a pseudo-java compiler what allows to create quite amazing byte code instrumentations without even understanding Java byte code. If you like to get your hands dirty, you might also like ASM on top of which cglib is built. ASM comes with a great documentation of both the library and Java class files and their byte code. Note that these examples only run with cglib 2.2.2 and are not compatible with the newest release 3 of cglib. Unfortunately, I experienced the newest cglib version to occasionally produce invalid byte code which is why I considered an old version and also use this version in production. Also, note that most projects using cglib move the library to their own namespace in order to avoid version conflicts with other dependencies such as for example demonstrated by the Spring project. You should do the same with your project when making use of cglib. Tools such like jarjar can help you with the automation of this good practice.

If you need to process large database result sets from Java, you can opt for JDBC to give you the low level control required. On the other hand, if you are already using an ORM in your application, falling back to JDBC might imply some extra pain. You would be losing features such as optimistic locking, caching, automatic fetching when navigating the domain model and so forth. Fortunately most ORMs, like Hibernate, have some options to help you with that. While these techniques are not new, there are a couple of possibilities to choose from. A simplified example; let's assume we have a table (mapped to class "DemoEntity") with 100.000 records. Each record consists of a single column (mapped to the property "property" in DemoEntity) holding some random alphanumerical data of about ~2KB. The JVM is ran with -Xmx250m. Let's assume that 250MB is the overall maximum memory that can be assigned to the JVM on our system. Your job is to read all records currently in the table, doing some not further specified processing, and finally store the result. We'll assume that the entities resulting from our bulk operation are not modified. To start we'll try the obvious first, performing a query to simply retrieve all data: new TransactionTemplate(txManager).execute(new TransactionCallback() { @Override public Void doInTransaction(TransactionStatus status) { Session session = sessionFactory.getCurrentSession(); List demoEntitities = (List) session.createQuery("from DemoEntity").list(); for(DemoEntity demoEntity : demoEntitities){ //Process and write result } return null; } }); After a couple of seconds: Exception in thread "main" java.lang.OutOfMemoryError: GC overhead limit exceeded Clearly this won't cut it. To fix this we will be switching to Hibernate scrollable result sets as probably most developers are aware of. The above example instructs hibernate to execute the query, map the entire results to entities and return them. When using scrollable result sets records are transformed to entities one at a time: new TransactionTemplate(txManager).execute(new TransactionCallback() { @Override public Void doInTransaction(TransactionStatus status) { Session session = sessionFactory.getCurrentSession(); ScrollableResults scrollableResults = session.createQuery("from DemoEntity").scroll(ScrollMode.FORWARD_ONLY); int count = 0; while (scrollableResults.next()) { if (++count > 0 && count % 100 == 0) { System.out.println("Fetched " + count + " entities"); } DemoEntity demoEntity = (DemoEntity) scrollableResults.get()[0]; //Process and write result } return null; } }); After running this we get: ... Fetched 49800 entities Fetched 49900 entities Fetched 50000 entities Exception in thread "main" java.lang.OutOfMemoryError: GC overhead limit exceeded Although we are using a scrollable result set, every returned object is an attached object and becomes part of the persistence context (aka session). The result is actually the same as our first example in which we used "session.createQuery("from DemoEntity").list()". However, with that approach we had no control; everything happens behind the scenes and you get a list back with all the data if hibernate has done its job. using a scrollable result set on the other hand gives us a hook into the retrieval process and allows us to free memory up when needed. As we have seen it does not free up memory automatically, you have to instruct Hibernate to actually do it. Following options exist: Evicting the object from the persistent context after processing it Clearing the entire session every now and then We will opt for the first. In the above example under line 13 (//Process and write result) we'll add: session.evict(demoEntity); Important: If you were to perform any modification to the entity (or entities it has associations with that are cascade evicted alongside), make sure to flush the session PRIOR evicting or clearing, otherwise queries hold back because of Hibernate's write behind will not be sent to the database Evicting or clearing does not remove the entities from second level cache. If you enabled second level cache and are using it and you want to remove them as well use the desired sessionFactory.getCache().evictXxx() method From the moment you evict an entity it will be no longer attached (no longer associated with a session). Any modification done to the entity at that stage will no longer be reflected to the database automatically. If you are using lazy loading, accessing any property that was not loaded prior the eviction will yield the famous org.hibernate.LazyInitializationException. So basically, make sure the processing for that entity is done (or it is at least initialized for further needs) before you evict or clear After we run the application again, we see that it now successfully executes: ... Fetched 99800 entities Fetched 99900 entities Fetched 100000 entities Btw; you can also set the query read-only allowing hibernate to perform some extra optimizations: ScrollableResults scrollableResults = session.createQuery("from DemoEntity").setReadOnly(true).scroll(ScrollMode.FORWARD_ONLY); Doing this only gives a very marginal difference in memory usage, in this specific test setup it enabled us to read about 300 entities extra with the given amount of memory. Personally I would not use this feature merely for memory optimizations alone but only if it suits in your overall immutability strategy. With hibernate you have different options to make entities read-only: on the entity itself, the overall session read-only and so forth. Setting read only false on the query individually is probably the least preferred approach. (eg. entities loaded in the session before will remain unaffected, possibly modifiable. Lazy associations will be loaded modifiable even if the root objects returned by the query are read only). Ok, we were able to process our 100.000 records, life is good. But as it turns out Hibernate has another another option for bulk operations: the stateless session. You can obtain a scrollable result set from a stateless session the same way as from a normal session. A stateless session lies directly above JDBC. Hibernate will run in nearly "all features disabled" mode. This means no persistent context, no 2nd level caching, no dirty detection, no lazy loading, basically no nothing. From the javadoc: /** * A command-oriented API for performing bulk operations against a database. * A stateless session does not implement a first-level cache nor interact with any * second-level cache, nor does it implement transactional write-behind or automatic * dirty checking, nor do operations cascade to associated instances. Collections are * ignored by a stateless session. Operations performed via a stateless session bypass * Hibernate's event model and interceptors. Stateless sessions are vulnerable to data * aliasing effects, due to the lack of a first-level cache. For certain kinds of * transactions, a stateless session may perform slightly faster than a stateful session. * * @author Gavin King */ The only thing it does is transforming records to objects. This might be an appealing alternative because it helps you getting rid of that manual evicting/flushing: new TransactionTemplate(txManager).execute(new TransactionCallback() { @Override public Void doInTransaction(TransactionStatus status) { sessionFactory.getCurrentSession().doWork(new Work() { @Override public void execute(Connection connection) throws SQLException { StatelessSession statelessSession = sessionFactory.openStatelessSession(connection); try { ScrollableResults scrollableResults = statelessSession.createQuery("from DemoEntity").scroll(ScrollMode.FORWARD_ONLY); int count = 0; while (scrollableResults.next()) { if (++count > 0 && count % 100 == 0) { System.out.println("Fetched " + count + " entities"); } DemoEntity demoEntity = (DemoEntity) scrollableResults.get()[0]; //Process and write result } } finally { statelessSession.close(); } } }); return null; } }); Besides the fact that the stateless session has the most optimal memory usage, using the it has some side effects. You might have noticed that we are opening a stateless session and closing it explicitly: there is no sessionFactory.getCurrentStatelessSession() nor (at the time of writing) any Spring integration for managing the stateless session.Opening a stateless session allocates a new java.sql.Connection by default (if you use openStatelessSession()) to perform its work and therefore indirectly spawns a second transaction. You can mitigate these side effects by using the Hibernate work API as in the example which supplies the current Connection and pass it along to openStatelessSession(Connection connection). Closing the session in the finally has no impact on the physical connection since that is captured by the Spring infrastructure: only the logical connection handle is closed and a new logical connection handle was created when opening the stateless session. Also note that you have to deal with closing the stateless session yourself and that the above example is only good for read-only operations. From the moment you are going to modify using the stateless session there are some more caveats. As said before, hibernate runs in "all feature disabled" mode and as a direct consequence entities are returned in detached state. For each entity you modify, you'll have to call: statelessSession.update(entity) explicitly. First I tried this for modifying an entity: new TransactionTemplate(txManager).execute(new TransactionCallback() { @Override public Void doInTransaction(TransactionStatus status) { sessionFactory.getCurrentSession().doWork(new Work() { @Override public void execute(Connection connection) throws SQLException { StatelessSession statelessSession = sessionFactory.openStatelessSession(connection); try { DemoEntity demoEntity = (DemoEntity) statelessSession.createQuery("from DemoEntity where id = 1").uniqueResult(); demoEntity.setProperty("test"); statelessSession.update(demoEntity); } finally { statelessSession.close(); } } }); return null; } }); The idea is that we open a stateless session with the existing database Connection. As the StatelessSession javadoc indicates that no write behind occurs, I was convinced that each statement performed by the stateless session would be sent directly to the database. Eventually when the transaction (started by the TransactionTemplate) would be committed the results would become visible in the database. However, hibernate does BATCH statements using a stateless session. I'm not 100% sure what the difference is between batching and write behind, but the result is the same and thus contra dictionary with the javadoc as statements are queued and flushed at a later time. So, if you don't do anything special, statements that are batched will not be flushed and this is what happened in my case: the "statelessSession.update(demoEntity);" was batched and never flushed. One way to force the flush is to use the hibernate transaction API: StatelessSession statelessSession = sessionFactory.openStatelessSession(); statelessSession.beginTransaction(); ... statelessSession.getTransaction().commit(); ... While this works, you probably don't want to start controlling your transactions programatically just because you are using a stateless session. Also, doing this we are again running our stateless session work in a second transaction scenario since we didn't pass along our Connection and thus a new database connection will be acquired. The reason we can't pass along the outer Connection is because if we commit the inner transaction (the "stateless session transaction") and it would be using the same connection as the outer transaction (started by the TransactionTemplate) it would break the outer transaction atomicity as statements from the outer transaction sent to database would be committed along with the inner transaction. So not passing along the connections means opening a new connection and thus creating a second transaction. A better alternative would be just to trigger Hibernate to flush the stateless session. However, statelessSession has no "flush" method to manually trigger a flush. A solution here is to depend a bit on the Hibernate internal API. This solution makes the manual transaction handling and the second transaction obsolete: all statements become part of our (one and only) outer transaction: StatelessSession statelessSession = sessionFactory.openStatelessSession(connection); try { DemoEntity demoEntity = (DemoEntity) statelessSession.createQuery("from DemoEntity where id = 1").uniqueResult(); demoEntity.setProperty("test"); statelessSession.update(demoEntity); ((TransactionContext) statelessSession).managedFlush(); } finally { statelessSession.close(); } Fortunately there is an even better solution very recently posted on the Spring jira: https://jira.springsource.org/browse/SPR-2495 This is not yet part of Spring, but the factory bean implementation is pretty straight forward: StatelessSessionFactoryBean.java when using this you could simple inject the StatelessSession: @Autowired private StatelessSession statelessSession; It will inject a stateless session proxy which is equivalent to the way the normal "current" session works (with the minor difference that you inject a SessionFactory and need to obtain the currentSession each time). When the proxy is invoked it will lookup the stateless session bound to the running transaction. If none exists already it will create one with the same connection as the normal session (like we did in the example) and register a custom transaction synchronization for the stateless session. When the transaction is committed the stateless session is flushed thanks to the synchronization and finally closed. Using this you can inject the stateless session directly and use it as a current session (or the same way as you would inject a JPA PeristentContext for that matter). This relieves you from dealing with the opening and closing of the stateless session and having to deal with one way or the other to make it flush. The implementation is JPA aimed, but the JPA part is limited to obtaining the physical connection in obtainPhysicalConnection(). You can easily leave out the EntityManagerFactory and get the physical connection directly from the Hibernate session. Very careful conclusion: it is clear that the best approach will depend on your situation. If you use the normal session you will have to deal with eviction yourself when reading or persisting entities. Besides the fact you have to do this manually, it might also impact further use of the session if you have a mixed transaction; you both perform 'bulk' and 'normal' operations in the same transaction. If you continue with the normal operations you will have detached entities in your session which might lead to unexpected results (as dirty detection will no longer work and so forth). On the other hand you will still have the major hibernate benefits (as long as the entity isn't evicted) such as lazy loading, caching, dirty detection and the likes. Using the stateless session at the time of writing requires some extra attention on managing it (opening, closing and flushing) which can also be error prone. In the assumption you can proceed with the proposed factory bean, you have a very bare bone session which is separately from your normal session but still participating in the same transaction. With this you have a powerful tool to perform bulk operations without having to think about memory management. The downside is that you don't have any other hibernate functionality available.

what is codenvy exactly? well, their website states: codenvy is a cloud environment for coding, building, and debugging apps. basically, it’s an ide in the cloud (“ide as a service?”) accessible by all the major browsers . it started out as an additional feature to the exo platform in early 2009 and gained a lot of traction after the first paas (openshift) and git integration was added mid-2011. codenvy targets me as a (java) software developer to run and debug applications in their hosted cloud ide, while being able to share and collaborate during development and finally publish to a repository – e.g. git – or a number of deployment platforms – e.g. amazon, openshift or google app engine. i first encountered their booth at javaone last september, but they couldn’t demo their product right there on the spot over the wifi, because their on-line demo workspace never finished loading well i got the t-shirt instead then, but now’s the time to see what codenvy has in store as a cloud ide. signing up signing up took 3 seconds. all you have to do is go to codenvy.com , use the “sign up” button, choose an email address and a name for your workspace , confirm the email they’ll send you and you’re done. the “workspace” holds all your projects and is part of the url codenvy will create for you, like “ https://codenvy.com/ide/ . although not very clear during the registration process – which of course nowadays is usually minimalistic as can be – it seems that i’ve signed up for codenvy’s free community plan , which gives me an unlimited number of public projects. you can even start coding without registration. after confirming the registration mail, i’m in. finally i’ll end up in the browser where your (empty) workspace has been opened. empty workspace a few options a possible for here on, as seen in the figure above: create a new project from scratch – generate an empty project from predefined project types import from github – import projects from your github account clone a git repository – create a new project from any public git reposiroty browse documentation invite people – get team members on board support – questions, feedback and troubleshooting let’s… create a new project from scratch this option allows you to name the new project – e.g. “myproject”, choose a technology and a paas . the technology is a defined set of languages of frameworks to develop with. available technologies at the moment the technologies are: java jar java war java spring javascript ruby on rails python php node.js android maven multi-module at the time of writing java 1.6 is supported. available paas at the moment the available platforms are: amazon webservices (aws) elastic beanstalk savvis cloud appfrog cloudbees google app engine (gae) heroku manymo android emulator red hat’s openshift none depending on the choice of technology, or or more paas options become available. a single jar can not be deployed onto any of the platforms, leaving only the option “none” available. a java web application (war) can be deployed onto any number of platforms, except heroku and manymo. node.js can only be deployed to openshift. creating a simple jar project after having selected a jar (and no platform) one can select a project template . e.g. if webapplication (war) would have been selected, codenvy would present project templates, such as google app engine java project illustrating simple examples that use the search api , java web project with datasource usage or a demonstration of accessing amazon s3 buckets using the java sdk . the jar technology has only one project: simple jar project . after having finished the wizard, our jar project has been created in our workspace. we’ll see two views of our project: a project explorer and a package explorer. project- and package explorer what we can see is that our jar project has been given a maven pom.xml with the following content: view source print ? 01. < project xmlns = " http://maven.apache.org/pom/4.0.0 " xmlns:xsi = " http://www.w3.org/2001/xmlschema-instance " 02. xsi:schemalocation = " http://maven.apache.org/pom/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd " > 03. < modelversion >4.0.0 04. < groupid >com.codenvy.workspaceyug8g52wjwb5im13 05. < artifactid >testjarproject 06. < version >1.0-snapshot 07. < packaging >jar 08. 09. < name >sample-lib 10. 11. < properties > 12. < project.build.sourceencoding >utf-8 13. 14. 15. < dependencies > 16. < dependency > 17. < groupid >junit 18. < artifactid >junit 19. < version >3.8.1 20. < scope >test 21. 22. 23. we have a generated group id com.codenvy.workspaceyug8g52wjwb5im13 , our own artifact id and the junit dependency, which is a decent choice for many java developers use it as a testing framework. the source encoding has already been set to utf-8, which is also a sensible choice. as a convenience we’ve also been given a hello.sayhello class, so we know we’re actually in a java project say hello file & project management so what about the browser-based editor we’re working in? on top we’re seeing a few menu’s, like file, project, edit, view, run, git, paas, window, share and help . i’ll be highlighting a few. file- and project menu the file menu allows to creating folders , packages and various kind of filetypes , such as text, xml (1.0 at time of writing) , html (4.1) , css (2.0), java classes and jsp’s (2.1). although i’m in a jar project, i am still also able to create here e.g. ruby, php or python files. a very convenient feature is to upload existing files to the workspace, either separately or in zip archives. i’ve tried dropping a file onto the package explorer from the file system, but the browser (in this case, chrome) tries to open it instead the project menu allows to create new projects, either by launching the create project wizard again, but also allows for importing from github . in order to clone a repository, you’ll have to authorize codenvy to access github.com to be able to import a project. after having authorized github, codeenvy presents me with a list of projects to choose from. after having imported all necessary stuff, it somehow needs to know what kind of project i’m importing. selecting a file type after importing a project from github the project i imported didn’t give codenvy any clues as to what kind of project it is (which is right since i only had a readme.md in it), so it lists a few options to choose from. i chose the maven multi-module type after which the output window shows: [email protected]:tvinke/examples.git was successfully cloned. [info] project type updated. if you’d have a pom.xml in the root of your project, it would immediately recognize it a s a maven project. apart from going through the project > import from github option, you can also go directly to the git menu, and choose clone repository . this allows you to manually enter the remote repository uri, wanted project name and the remote name (e.g. “origin”). cloning a repository one you have pulled in a git project, the git menu allows all kinds of common operations, such as adding and removing files, committing, pushing, pulling and much more. git menu the ssh keys can be found under menu window > preferences where you can view the github.com entry, where one can view the details or delete it. also a new key can be either generated or uploaded here. sharing the project one of the unique selling points of codenvy are their collaboration possibilities which come along with any project. you can: invite other developers with read-only rights or full read-write rights to your workspace and every project in it.when you’re pair-programming like this, or co-editing a file with a colleague, you can also send each other code pointers – small shortcuts to code lines. use factories to create temporary workspaces , through cloning, off one source project (“factory”) and represent the cloning mechanism as a url which can be given to other developers. a use case might be to get a colleague quickly started on a project by providing a fully working development environment.there’s a lot more about creating factories in the docs (such as through rest), but the nice thing is that once you have a factory url, you can embed it as a button, send it through email of publish it somewhere for others! a factory url to load up e.g. their twitter bootstrap sample – as they use on their website themselves – looks like: https://codenvy.com/factory?v=1.0&pname=sample-twitterbootstrap&wname=codenvy-factories&vcs=git&vcsurl=http%3a%2f%2fcodenvy.com%2fgit%2f04%2f0f%2f7f%2fworkspacegcpv6cdxy1q34n1i%2fsample-twitterbootstrap&idcommit=c1443ecea63471f5797f172c081cd802bac6e6b0&action=openproject&ptype=javascript conclusion applications are run in the cloud nowadays, so why not create them there too? codenvy brings some interesting features, such as being able to instantly provision workspaces (through factory urls) and share projects in real-time. it supports common operations with projects, files and version control. with a slew of languages and platforms and as an ide being always accessible through the internet, it could lower the barrier to actually code anytime and anywhere. in a future post i will try and see whether or not it can actually replace my conventional desktop ide for java development.

I first came across Reactive Extensions about 4 years ago on Matthew Podwysocki’s blog but then haven’t heard much about it until I saw Matthew give a talk at Code Mesh a few weeks ago. It seems to have grown in popularity recently and I noticed that’s there’s now a Java version called RxJavawritten by Netflix. I thought I’d give it a try by changing some code I wrote while exploring cypher’s MERGE function to expose an Observable instead of Futures. To recap, we have 50 threads and we do 100 iterations where we create random (user, event) pairs. We create a maximum of 10 users and 50 events and the goal is to concurrently send requests for the same pairs. In the example of my other post I was throwing away the result of each query whereas here I returned the result back so I had something to subscribe to. The outline of the code looks like this: public class MergeTimeRx { public static void main( final String[] args ) throws InterruptedException, IOException { String pathToDb = "/tmp/foo"; FileUtils.deleteRecursively( new File( pathToDb ) ); GraphDatabaseService db = new GraphDatabaseFactory().newEmbeddedDatabase( pathToDb ); final ExecutionEngine engine = new ExecutionEngine( db ); int numberOfThreads = 50; int numberOfUsers = 10; int numberOfEvents = 50; int iterations = 100; Observable events = processEvents( engine, numberOfUsers, numberOfEvents, numberOfThreads, iterations ); events.subscribe( new Action1() { @Override public void call( ExecutionResult result ) { for ( Map row : result ) { } } } ); .... } } The nice thing about using RxJava is that there’s no mention of how we got our collection of ExecutionResults, it’s not important. We just have a stream of them and by calling the subscribe function on the Observablewe’ll be informed whenever another one is made available. Most of the examples I found show how to generate events from a single thread but I wanted to use a thread pool so that I could fire off lots of requests at the same time. The processEvents method ended up looking like this: private static Observable processEvents( final ExecutionEngine engine, final int numberOfUsers, final int numberOfEvents, final int numberOfThreads, final int iterations ) { final Random random = new Random(); final List userIds = generateIds( numberOfUsers ); final List eventIds = generateIds( numberOfEvents ); return Observable.create( new Observable.OnSubscribeFunc() { @Override public Subscription onSubscribe( final Observer observer ) { final ExecutorService executor = Executors.newFixedThreadPool( numberOfThreads ); List> jobs = new ArrayList<>(); for ( int i = 0; i < iterations; i++ ) { Future job = executor.submit( new Callable() { @Override public ExecutionResult call() { Integer userId = userIds.get( random.nextInt( numberOfUsers ) ); Integer eventId = eventIds.get( random.nextInt( numberOfEvents ) ); return engine.execute( "MERGE (u:User {id: {userId})\n" + "MERGE (e:Event {id: {eventId})\n" + "MERGE (u)-[:HAS_EVENT]->(e)\n" + "RETURN u, e", MapUtil.map( "userId", userId, "eventId", eventId ) ); } } ); jobs.add( job ); } for ( Future future : jobs ) { try { observer.onNext( future.get() ); } catch ( InterruptedException | ExecutionException ignored ) { } } observer.onCompleted(); executor.shutdown(); return Subscriptions.empty(); } } ); } I’m not sure if that’s the correct way of using Observables so please let me know in the comments if I’ve got it wrong. I wasn’t sure what the proper way of handling errors was. I initially had a call to observer#onError in the catch block but that means that no further events are produced which wasn’t what I wanted. The code is available as a gist if you want to play around with it. I added the following dependency to get the RxJava library: com.netflix.rxjava rxjava-core 0.15.1

This article is an introduction to using the specification pattern in Java. We also will see how we can combine classic specifications with JPA Criteria queries to retrieve objects from a relational database. Within this post we will use the following Poll class as an example entity for creating specifications. It represents a poll that has a start and end date. In the time between those two dates users can vote among different choices. A poll can also be locked by an administrator before the end date has been reached. In this case, a lock date will be set. @Entity public class Poll { @Id @GeneratedValue private long id; private DateTime startDate; private DateTime endDate; private DateTime lockDate; @OneToMany(cascade = CascadeType.ALL) private List votes = new ArrayList<>(); } For better readability I skipped getters, setters, JPA annotations for mapping Joda DateTime instances and fields that aren't needed in this example (like the question being asked in the poll). Now assume we have two constraints we want to implement: A poll is currently running if it is not locked and if startDate < now < endDate A poll is popular if it contains more than 100 votes and is not locked We could start by adding appropriate methods to Poll like: poll.isCurrentlyRunning(). Alternatively we could use a service method like pollService.isCurrentlyRunning(poll). However, we also want to be able to query the database to get all currently running polls. So we might add a DAO or repository method like pollRepository.findAllCurrentlyRunningPolls(). If we follow this way we implement the isCurrentlyRunning constraint two times in two different locations. Things become worse if we want to combine constraints. What if we want to query the database for a list of all popular polls that are currently running? This is where the specification pattern come in handy. When using the specification pattern we move business rules into extra classes called specifications. To get started with specifications we create a simple interface and an abstract class: public interface Specification { boolean isSatisfiedBy(T t); Predicate toPredicate(Root root, CriteriaBuilder cb); Class getType(); } abstract public class AbstractSpecification implements Specification { @Override public boolean isSatisfiedBy(T t) { throw new NotImplementedException(); } @Override public Predicate toPredicate(Root poll, CriteriaBuilder cb) { throw new NotImplementedException(); } @Override public Class getType() { ParameterizedType type = (ParameterizedType) this.getClass().getGenericSuperclass(); return (Class) type.getActualTypeArguments()[0]; } } Please ignore the AbstractSpecification class with the mysterious getType() method for a moment (we come back to it later). The central part of a specification is the isSatisfiedBy() method, which is used to check if an object satisfies the specification. toPredicate() is an additional method we use in this example to return the constraint as javax.persistence.criteria.Predicate instance which can be used to query a database. For each constraint we create a new specification class that extends AbstractSpecification and implements isSatisfiedBy() and toPredicate(). The specification implementation to check if a poll is currently running looks like this: public class IsCurrentlyRunning extends AbstractSpecification { @Override public boolean isSatisfiedBy(Poll poll) { return poll.getStartDate().isBeforeNow() && poll.getEndDate().isAfterNow() && poll.getLockDate() == null; } @Override public Predicate toPredicate(Root poll, CriteriaBuilder cb) { DateTime now = new DateTime(); return cb.and( cb.lessThan(poll.get(Poll_.startDate), now), cb.greaterThan(poll.get(Poll_.endDate), now), cb.isNull(poll.get(Poll_.lockDate)) ); } } Within isSatisfiedBy() we check if the passed object matches the constraint. In toPredicate() we construct a Predicate using JPA's CriteriaBuilder. We will use the resulting Predicate instance later to build a CriteriaQuery for querying the database. The specification for checking if a poll is popular looks similar: public class IsPopular extends AbstractSpecification { @Override public boolean isSatisfiedBy(Poll poll) { return poll.getLockDate() == null && poll.getVotes().size() > 100; } @Override public Predicate toPredicate(Root poll, CriteriaBuilder cb) { return cb.and( cb.isNull(poll.get(Poll_.lockDate)), cb.greaterThan(cb.size(poll.get(Poll_.votes)), 5) ); } } If we now want to test if a Poll instance matches one of these constraints we can use our newly created specifications: boolean isPopular = new IsPopular().isSatisfiedBy(poll); boolean isCurrentlyRunning = new IsCurrentlyRunning().isSatisfiedBy(poll); For querying the database we need to extend our DAO / repository to support specifications. This can look like the following: public class PollRepository { private EntityManager entityManager = ... public List findAllBySpecification(Specification specification) { CriteriaBuilder criteriaBuilder = entityManager.getCriteriaBuilder(); // use specification.getType() to create a Root instance CriteriaQuery criteriaQuery = criteriaBuilder.createQuery(specification.getType()); Root root = criteriaQuery.from(specification.getType()); // get predicate from specification Predicate predicate = specification.toPredicate(root, criteriaBuilder); // set predicate and execute query criteriaQuery.where(predicate); return entityManager.createQuery(criteriaQuery).getResultList(); } } Here we finally use the getType() method implemented in AbstractSpecification to createCriteriaQuery and Root instances. getType() returns the generic type of theAbstractSpecification instance defined by the subclass. For IsPopular andIsCurrentlyRunning it returns the Poll class. Without getType() we would have to create theCriteriaQuery and Root instances inside toPredicate() of every specification we create. So it is just a small helper to reduce boiler plate code inside specifications. Feel free to replace this with your own implementation if you come up with better approaches. Now we can use our repository to query the database for polls that match a certain specification: List popularPolls = pollRepository.findAllBySpecification(new IsPopular()); List currentlyRunningPolls = pollRepository.findAllBySpecification(new IsCurrentlyRunning()); At this point the specifications are the only components that contain the constraint definitions. We can use it to query the database or to check if an object fulfills the required rules. However one question remains: How do we combine two or more constraints? For example we would like to query the database for all popular polls that are still running. The answer to this is a variation of the composite design pattern called composite specifications. Using a composite specification we can combine specifications in different ways. To query the database for all running and popular pools we need to combine the isCurrentlyRunning with theisPopular specification using the logical and operation. Let's create another specification for this. We name itAndSpecification: public class AndSpecification extends AbstractSpecification { private Specification first; private Specification second; public AndSpecification(Specification first, Specification second) { this.first = first; this.second = second; } @Override public boolean isSatisfiedBy(T t) { return first.isSatisfiedBy(t) && second.isSatisfiedBy(t); } @Override public Predicate toPredicate(Root root, CriteriaBuilder cb) { return cb.and( first.toPredicate(root, cb), second.toPredicate(root, cb) ); } @Override public Class getType() { return first.getType(); } } An AndSpecification is created out of two other specifications. In isSatisfiedBy() and toPredicate()we return the result of both specifications combined by a logical and operation. We can use our new specification like this: Specification popularAndRunning = new AndSpecification<>(new IsPopular(), new IsCurrentlyRunning()); List polls = myRepository.findAllBySpecification(popularAndRunning); To improve readability we can add an and() method to the Specification interface: public interface Specification { Specification and(Specification other); // other methods } and implement it within our abstract implementation: abstract public class AbstractSpecification implements Specification { @Override public Specification and(Specification other) { return new AndSpecification<>(this, other); } // other methods } Now we can chain multiple specification by using the and() method: Specification popularAndRunning = new IsPopular().and(new IsCurrentlyRunning()); boolean isPopularAndRunning = popularAndRunning.isSatisfiedBy(poll); List polls = myRepository.findAllBySpecification(popularAndRunning); When needed we can easily extend this further with other composite specifications (for exampleOrSpecification or NotSpecification). Conclusion When using the specification pattern we move business rules in separate specification classes. These specification classes can be easily combined by using composite specifications. In general, specification improve reusability and maintainability. Additionally specifications can easily be unit tested. For more detailed information about the specification pattern I recommend this article by Eric Evans and Martin Fowler. You can find the source of this example project on GitHub.

Editor's note: Be sure to check out part 2 as well. This is the fourth of an introductory series of blogs on Apache HBase. In the third part, we saw a high level view of HBase architecture . In this part, we'll use the HBase Java API to create tables, insert new data, and retrieve data by row key. We'll also see how to setup a basic table scan which restricts the columns retrieved and also uses a filter to page the results. Having just learned about HBase high-level architecture, now let's look at the Java client API since it is the way your applications interact with HBase. As mentioned earlier you can also interact with HBase via several flavors of RPC technologies like Apache Thrift plus a REST gateway, but we're going to concentrate on the native Java API. The client APIs provide both DDL (data definition language) and DML (data manipulation language) semantics very much like what you find in SQL for relational databases. Suppose we are going to store information about people in HBase, and we want to start by creating a new table. The following listing shows how to create a new table using the HBaseAdmin class. Configuration conf = HBaseConfiguration.create(); HBaseAdmin admin = new HBaseAdmin(conf); HTableDescriptor tableDescriptor = new HTableDescriptor(TableName.valueOf("people")); tableDescriptor.addFamily(new HColumnDescriptor("personal")); tableDescriptor.addFamily(new HColumnDescriptor("contactinfo")); tableDescriptor.addFamily(new HColumnDescriptor("creditcard")); admin.createTable(tableDescriptor); The people table defined in preceding listing contains three column families: personal, contactinfo, and creditcard. To create a table you create an HTableDescriptor and add one or more column families by adding HColumnDescriptor objects. You then call createTable to create the table. Now we have a table, so let's add some data. The next listing shows how to use the Put class to insert data on John Doe, specifically his name and email address (omitting proper error handling for brevity). Configuration conf = HBaseConfiguration.create(); HTable table = new HTable(conf, "people"); Put put = new Put(Bytes.toBytes("doe-john-m-12345")); put.add(Bytes.toBytes("personal"), Bytes.toBytes("givenName"), Bytes.toBytes("John")); put.add(Bytes.toBytes("personal"), Bytes.toBytes("mi"), Bytes.toBytes("M")); put.add(Bytes.toBytes("personal"), Bytes.toBytes("surame"), Bytes.toBytes("Doe")); put.add(Bytes.toBytes("contactinfo"), Bytes.toBytes("email"), Bytes.toBytes("[email protected]")); table.put(put); table.flushCommits(); table.close(); In the above listing we instantiate a Put providing the unique row key to the constructor. We then add values, which must include the column family, column qualifier, and the value all as byte arrays. As you probably noticed, the HBase API's utility Bytes class is used a lot; it provides methods to convert to and from byte[] for primitive types and strings. (Adding a static import for the toBytes() method would cut out a lot of boilerplate code.) We then put the data into the table, flush the commits to ensure locally buffered changes take effect, and finally close the table. Updating data is also done via the Put class in exactly the same manner as just shown in the prior listing. Unlike relational databases in which updates must update entire rows even if only one column changed, if you only need to update a single column then that's all you specify in the Put and HBase will only update that column. There is also a checkAndPut operation which is essentially a form of optimistic concurrency control - the operation will only put the new data if the current values are what the client says they should be. Retrieving the row we just created is accomplished using the Get class, as shown in the next listing. (From this point forward, listings will omit the boilerplate code to create a configuration, instantiate the HTable, and the flush and close calls.) Get get = new Get(Bytes.toBytes("doe-john-m-12345")); get.addFamily(Bytes.toBytes("personal")); get.setMaxVersions(3); Result result = table.get(get); The code in the previous listing instantiates a Get instance supplying the row key we want to find. Next we use addFamily to instruct HBase that we only need data from the personal column family, which also cuts down the amount of work HBase must do when reading information from disk. We also specify that we'd like up to three versions of each column in our result, perhaps so we can list historical values of each column. Finally, calling get returns a Result instance which can then be used to inspect all the column values returned. In many cases you need to find more than one row. HBase lets you do this by scanning rows, as shown in the second part which showed using a scan in the HBase shell session. The corresponding class is the Scan class. You can specify various options, such as the start and ending row key to scan, which columns and column families to include and the maximum versions to retrieve. You can also add filters, which allow you to implement custom filtering logic to further restrict which rows and columns are returned. A common use case for filters is pagination. For example, we might want to scan through all people whose last name is Smith one page (e.g. 25 people) at a time. The next listing shows how to perform a basic scan. Scan scan = new Scan(Bytes.toBytes("smith-")); scan.addColumn(Bytes.toBytes("personal"), Bytes.toBytes("givenName")); scan.addColumn(Bytes.toBytes("contactinfo"), Bytes.toBytes("email")); scan.setFilter(new PageFilter(25)); ResultScanner scanner = table.getScanner(scan); for (Result result : scanner) { // ... } In the above listing we create a new Scan that starts from the row key smith- and we then use addColumn to restrict the columns returned (thus reducing the amount of disk transfer HBase must perform) to personal:givenName and contactinfo:email. A PageFilter is set on the scan to limit the number of rows scanned to 25. (An alternative to using the page filter would be to specify a stop row key when constructing the Scan.) We then get a ResultScanner for the Scan just created, and loop through the results performing whatever actions are necessary. Since the only method in HBase to retrieve multiple rows of data is scanning by sorted row keys, how you design the row key values is very important. We'll come back to this topic later. You can also delete data in HBase using the Delete class, analogous to the Put class to delete all columns in a row (thus deleting the row itself), delete column families, delete columns, or some combination of those. Connection Handling In the above examples not much attention was paid to connection handling and RPCs (remote procedure calls). HBase provides the HConnection class which provides functionality similar to connection pool classes to share connections, for example you use the getTable() method to get a reference to an HTable instance. There is also an HConnectionManager class which is how you get instances of HConnection. Similar to avoiding network round trips in web applications, effectively managing the number of RPCs and amount of data returned when using HBase is important, and something to consider when writing HBase applications. Conclusion to Part 4 In this part we used the HBase Java API to create a people table, insert a new person, and find the newly inserted person information. We also used the Scan class to scan the people table for people with last name "Smith" and showed how to restrict the data retrieved and finally how to use a filter to limit the number of results. In the next part, we'll learn how to deal with the absence of SQL and relations when modeling schemas in HBase. References HBase web site, http://hbase.apache.org/ HBase wiki, http://wiki.apache.org/hadoop/Hbase HBase Reference Guide http://hbase.apache.org/book/book.html HBase: The Definitive Guide, http://bit.ly/hbase-definitive-guide Google Bigtable Paper, http://labs.google.com/papers/bigtable.html Hadoop web site, http://hadoop.apache.org/ Hadoop: The Definitive Guide, http://bit.ly/hadoop-definitive-guide Fallacies of Distributed Computing, http://en.wikipedia.org/wiki/Fallacies_of_Distributed_Computing HBase lightning talk slides, http://www.slideshare.net/scottleber/hbase-lightningtalk Sample code, https://github.com/sleberknight/basic-hbase-examples

In Lucene's facet module we recently added support for dynamic range faceting, to show how many hits match each of a dynamic set of ranges. For example, the Updated drill-down in the Lucene/Solr issue search application uses range facets. Another example is distance facets (< 1 km, < 2 km, etc.), where the distance is dynamically computed based on the user's current location. Price faceting might also use range facets, if the ranges cannot be established during indexing. To implement range faceting, for each hit, we first calculate the value (the distance, the age, the price) to be aggregated, and then lookup which ranges match that value and increment its counts. Today we use a simple linear search through all ranges, which has O(N) cost, where N is the number of ranges. But this is inefficient! Segment Trees There are fun data structures like segment trees and interval trees with O(log(N) + M) cost per lookup, where M is the number of ranges that match the given value. I chose to explore segment trees, as Lucene only requires looking up by a single value (interval trees can also efficiently look up all ranges overlapping a provided range) and also because all the ranges are known up front (interval trees also support dynamically adding or removing ranges). If the ranges will never overlap, you can use a simple binary search; Guava's ImmutableRangeSet takes this approach. However, Lucene's range faceting allows overlapping ranges so we can't do that. Segment trees are simple to visualize: you "project" all ranges down on top of one another, creating a one-dimensional Venn diagram, to define the elementary intervals. This classifies the entire range of numbers into a minimal number of distinct ranges, each elementary interval, such that all points in each elementary interval always match the same set of input ranges. The lookup process is then a binary search to determine which elementary interval a point belongs to, recording the matched ranges as you recurse down the tree. Consider these ranges; the lower number is inclusive and the upper number is exclusive: 0: 0 – 10 1: 0 – 20 2: 10 – 30 3: 15 – 50 4: 40 – 70 The elementary intervals (think Venn diagram!) are: -∞ – 0 0 – 10 10 – 15 15 – 20 20 – 30 30 – 40 40 – 50 50 – 70 70 – ∞ Finally, you build a binary tree on top of the elementary ranges, and then add output range indices to both internal nodes and the leaves of that tree, necessary to prevent adversarial cases that would require too much (O(N^2)) space. During lookup, as you walk down the tree, you gather up the output ranges (indices) you encounter; for our example, each elementary range is assigned the follow range indices as outputs: -∞ – 0 → 0 – 10 → 0 10 – 15 → 1, 2 15 – 20 → 1, 2, 3 20 – 30 → 2, 3 30 – 40 → 3 40 – 50 → 3, 4 50 – 70 → 4 70 – ∞ → Some ranges correspond to 1 elementary interval, while other ranges correspond to 2 or 3 or more, in general. Some, 2 in this example, may have no matching input ranges. Looking Up Matched Ranges I've pushed all sources described below to new Google code project; the code is still somewhat rough and exploratory, so there are likely exciting bugs lurking, but it does seem to work: it includes (passing!) tests and simple micro-benchmarks. I started with a basic segment tree implementation as described on the Wikipedia page, for long values, called SimpleLongRangeMultiSet; here's the recursive lookup method: private int lookup(Node node, long v, int[] answers, int upto) { if (node.outputs != null) { for(int range : node.outputs) { answers[upto++] = range; } } if (node.left != null) { if (v <= node.left.end) { upto = lookup(node.left, v, answers, upto); } else { upto = lookup(node.right, v, answers, upto); } } return upto; } This worked correctly, but I realized there must be non-trivial overhead for the recursion, checking for nulls, the for loop over the output values, etc. Next, I tried switching to parallel arrays to hold the binary tree (ArrayLongRangeMultiSet), where the left child of node N is at 2*N and the right child is at 2*N+1, but this turned out to be slower. After that I tested a code specializing implementation, first by creating dynamic Java source code from the binary tree. This eliminates the recursion and creates a single simple method that uses a series of if statements, specialized to the specific ranges, to do the binary search and record the range indices. Here's the resulting specialized code, compiled from the above ranges: void lookup(long v, int[] answers) { int upto = 0; if (v <= 19) { if (v <= 9) { if (v >= 0) { answers[upto++] = 0; answers[upto++] = 1; } } else { answers[upto++] = 1; answers[upto++] = 2; if (v >= 15) { answers[upto++] = 3; } } } else { if (v <= 39) { answers[upto++] = 3; if (v <= 29) { answers[upto++] = 2; } } else { if (v <= 49) { answers[upto++] = 3; answers[upto++] = 4; } else { if (v <= 69) { answers[upto++] = 4; } } } } } Finally, using the ASM library, I compiled the tree directly to specialized Java bytecode, and this proved to be fastest (up to 2.5X faster in some cases). As a baseline, I also added the simple linear search method, LinearLongRangeMultiSet; as long as you don't have too many ranges (say 10 or less), its performance is often better than the Java segment tree. The implementation also allows you to specify the allowed range of input values (for example, maybe all values are >=0 in your usage), which can save an if statement or two in the lookup method. Counting All Matched Ranges While the segment tree allows you to quickly look up all matching ranges for a given value, after a nice tip from fellow Lucene committee Robert Muir, we realized Lucene's range faceting does not need to know the ranges for each value; instead, it only requires the aggregated counts for each range in the end, after seeing many values. This leads to an optimization: compute counts for each elementary interval and then in the end, roll up those counts to get the count for each range. This will only work for single-valued fields, since for a multi-valued field you'd need to carefully never increment the same range more than once per hit. So based on that approach, I created a new LongRangeCounter abstract base class, and the SimpleLongRangeCounter Java implementation, and also the ASM specialized version, and the results are indeed faster (~20 to 50%) than using the lookup method to count; I'll use this approach with Lucene. Segment trees are normally always "perfectly" balanced but one final twist I explored was to use a training set of values to bias the order of the if statements. For example, if your ranges cover a tiny portion of the search space, as is the case for the Updated drill-down, then it should be faster to use a slightly unbalanced tree, by first checking if the value is less than the maximum range. However, in testing, while there are some cases where this "training" is a bit faster, often it's slower; I'm not sure why. Lucene I haven't folded this into Lucene yet, but I plan to; all the exploratory code lives in the segment-trees Google code project for now. Results on the micro-benchmarks can be entirely different once the implementations are folded into a "real" search application. While ASM is a powerful way to generate specialized code, and it gives sizable performance gains at least in the micro-benchmarks, it is an added dependency and complexity for ongoing development and many more developers know Java than ASM. It may also confuse hotspot, causing deoptimizations when there are multiple implementations for an abstract base class. Furthermore, if there are many ranges, the resulting specialized bytecode can be become quite large (but, still O(N*log(N)) in size), which may cause other problems. On balance I'm not sure the sizable performance gains (on a micro-benchmark) warrant using ASM in Lucene's range faceting.

A typical Maven and Spring web application has a fair amount of XML and verbosity to it. Add in Jersey and Spring Security and you can have hundreds of lines of XML before you even start to write your Java code. As part of a recent project, I was tasked with upgrading a webapp like this to use Spring 4 and Spring Boot. I also figured I'd try to minimize the XML. This is my story on how I upgraded to Spring 4, Jersey 2, Java 8 and Spring Boot 0.5.0 M6. When I started, the app was using Spring 3.2.5, Spring Security 3.1.4 and Jersey 1.18. The pom.xml had four Jersey dependencies, three Spring dependencies and three Spring Security dependencies, along with a number of exclusions for "jersey-spring". Upgrading to Spring 4 Upgrading to Spring 4 was easy, I changed the version property to 4.0.0.RC2 and added the new Spring bill of materials to my pom.xml. I also add the Spring milestone repo since Spring 4 won't be released to Maven central until tomorrow. org.springframework spring-framework-bom ${spring.framework.version} pom import spring-milestones http://repo.spring.io/milestone true Next, I removed all the references to ${spring.framework.version} in dependencies since it'd be controlled by Maven's dependency management feature. org.springframework spring-web - ${spring.framework.version} I also changed to use Maven 3's wildcard syntax to exclude multiple dependencies. com.sun.jersey.contribs jersey-spring org.springframework - spring - - - org.springframework - spring-core - - - org.springframework - spring-web - - - org.springframework - spring-beans - - - org.springframework - spring-context + * I confirmed the upgrade worked by running "mvn dependency:tree | grep spring", followed by "mvn jetty:run" and viewing the app in my browser. Upgrading to Jersey 2 The next item I tackled was upgrading to Jersey 2.4.1. I changed the version number in my pom.xml, then added the Jersey BOM. org.glassfish.jersey jersey-bom ${jersey.version} pom import You might ask "why Jersey?" if we already have Spring MVC and its REST support? You might also ask why not Play or Grails instead of a Java + Spring stack? For this particular project, I recommended technology options, and these were certainly among them. However, the team chose differently and I support their decision. The project is creating an iOS app, as well as a responsive HTML5 mobile/desktop app. We figured we had enough risk with new technologies on the front-end that we should play it a bit safer on the backend. To make the backend work a bit sexier, we've decided to allow Spring 4, Java 8 and possibly some reactive principles. Next, I changed from the old com.sun.jersey dependencies to org.glassfish.jersey and removed jersey-spring. org.glassfish.jersey.containers jersey-container-servlet org.glassfish.jersey.media jersey-media-json-jackson The last thing I needed to do was change the servlet-class and param-name in web.xml: jersey-servlet org.glassfish.jersey.servlet.ServletContainer jersey.config.server.provider.packages com.raibledesigns.boot.service 1 Requiring Java 8 Requiring Java 8 to compile was easy enough. I added the maven-compiler-plugin to enforce a minimum version. maven-compiler-plugin 3.1 1.8 1.8 I downloaded the latest Java 8 SDK and installed it. Then I set my JAVA_HOME to use it. export JAVA_HOME=`/usr/libexec/java_home -v 1.8` Integrating Spring Boot I learned about Spring Boot a few weeks ago at Devoxx. Josh Long gave me a 3-minute demo at the speaker's dinner and showed me enough to peak my interest. To integrate it into my project, I started with the Quick Start. I added the boot-parent, dependencies for web, security and actuator (logging, metrics, etc.) and the Maven plugin. I removed all the Spring and Spring Security dependencies. org.springframework.boot spring-boot-starter-parent 0.5.0.M6 ... spring-milestones http://repo.spring.io/milestone ... org.springframework.boot spring-boot-starter-web org.springframework.boot spring-boot-starter-security org.springframework.boot spring-boot-starter-actuator ... org.springframework.boot spring-boot-maven-plugin Upon restarting my app, I got an error about spring-security.xml using a 3.1 XSD. I fixed it by changing to 3.2. Next, I wanted to eliminate web.xml. First of all, I created an ApplicationInitializer so the WAR could be started from the command line. package com.raibledesigns.boot.config; import org.springframework.boot.SpringApplication; import org.springframework.boot.autoconfigure.EnableAutoConfiguration; import org.springframework.boot.builder.SpringApplicationBuilder; import org.springframework.boot.web.SpringBootServletInitializer; import org.springframework.context.annotation.ComponentScan; import org.springframework.context.annotation.Configuration; @Configuration @EnableAutoConfiguration @ComponentScan public class ApplicationInitializer extends SpringBootServletInitializer { @Override protected SpringApplicationBuilder configure(SpringApplicationBuilder application) { return application.sources(ApplicationInitializer.class); } public static void main(String[] args) { SpringApplication.run(ApplicationInitializer.class, args); } } However, after adding this, I received the following error on startup: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'org.springframework.boot.context.properties.ConfigurationPropertiesBindingPostProcessor': Invocation of init method failed; nested exception is java.lang.AbstractMethodError: org.hibernate.validator.internal.engine.ConfigurationImpl .getDefaultParameterNameProvider()Ljavax/validation/ParameterNameProvider; Adding hibernate-validator as a dependency solved this problem: org.hibernate hibernate-validator To configure Spring Security without web.xml and spring-security.xml, I created WebSecurityConfig.java: package com.raibledesigns.boot.config; import org.springframework.context.annotation.Configuration; import org.springframework.core.Ordered; import org.springframework.core.annotation.Order; import org.springframework.security.config.annotation.authentication.builders.AuthenticationManagerBuilder; import org.springframework.security.config.annotation.web.builders.HttpSecurity; import org.springframework.security.config.annotation.web.configuration.EnableWebSecurity; import org.springframework.security.config.annotation.web.configuration.WebSecurityConfigurerAdapter; @Configuration @EnableWebSecurity @Order(Ordered.LOWEST_PRECEDENCE - 6) public class WebSecurityConfig extends WebSecurityConfigurerAdapter { @Override protected void configure(HttpSecurity http) throws Exception { http.authorizeRequests() .antMatchers("/", "/home").permitAll() .antMatchers("/v1.0/**").hasRole("USER") .anyRequest().authenticated(); http.httpBasic().realmName("My API"); } @Override protected void configure(AuthenticationManagerBuilder authManagerBuilder) throws Exception { authManagerBuilder.inMemoryAuthentication() .withUser("test").password("test123").roles("USER"); } } To configure Jersey without web.xml, I created a JerseyConfig class: package com.raibledesigns.boot.config; import org.glassfish.jersey.filter.LoggingFilter; import org.glassfish.jersey.jackson.JacksonFeature; import org.glassfish.jersey.server.ResourceConfig; import org.glassfish.jersey.server.ServerProperties; import javax.ws.rs.ApplicationPath; @ApplicationPath("/v1.0") public class JerseyConfig extends ResourceConfig { public JerseyConfig() { packages("com.raibledesigns.boot.service"); property(ServerProperties.BV_SEND_ERROR_IN_RESPONSE, true); property(ServerProperties.JSON_PROCESSING_FEATURE_DISABLE, false); property(ServerProperties.MOXY_JSON_FEATURE_DISABLE, true); property(ServerProperties.WADL_FEATURE_DISABLE, true); register(LoggingFilter.class); register(JacksonFeature.class); } } Finally, I created MvcConfig.java to set the welcome page. package com.raibledesigns.boot.config; import org.springframework.context.annotation.Configuration; import org.springframework.web.servlet.config.annotation.ViewControllerRegistry; import org.springframework.web.servlet.config.annotation.WebMvcConfigurerAdapter; @Configuration public class MvcConfig extends WebMvcConfigurerAdapter { @Override public void addViewControllers(ViewControllerRegistry registry) { registry.addViewController("/").setViewName("index"); } } To cleanup, I deleted src/main/webapp/WEB-INF and created src/main/resources/logback.xml: Since Boot doesn't support JSP out-of-the-box, I renamed my index.jsp file to index.html and changed the URL in it to point to "/v1.0/hello". I was pleased to see that everything worked nicely. I learned shortly after that I could remove the Spring BOM since Spring Boot uses a property to control its Spring version. The only issue I found is when started the app with "mvn package && java -jar target/app.war", it failed to initialize Jersey. I tried adding a @Bean for the servlet: @Bean public ServletRegistrationBean jerseyServlet() { ServletRegistrationBean registration = new ServletRegistrationBean(new ServletContainer(), "/v1.0/*"); registration.addInitParameter(ServletProperties.JAXRS_APPLICATION_CLASS, JerseyConfig.class.getName()); return registration; } Unfortunately, when running it using "java -jar", I get the following error: org.glassfish.hk2.api.MultiException: A MultiException has 1 exceptions. They are: 1. org.glassfish.jersey.server.internal.scanning.ResourceFinderException: java.io.FileNotFoundException: /.../target/app.war!/WEB-INF/classes (No such file or directory) at org.jvnet.hk2.internal.Utilities.justCreate(Utilities.java:869) at org.jvnet.hk2.internal.ServiceLocatorImpl.create(ServiceLocatorImpl.java:814) at org.jvnet.hk2.internal.ServiceLocatorImpl.createAndInitialize(ServiceLocatorImpl.java:906) at org.jvnet.hk2.internal.ServiceLocatorImpl.createAndInitialize(ServiceLocatorImpl.java:898) at org.glassfish.jersey.server.ApplicationHandler.createApplication(ApplicationHandler.java:300) at org.glassfish.jersey.server.ApplicationHandler.(ApplicationHandler.java:279) at org.glassfish.jersey.servlet.WebComponent.(WebComponent.java:302) This seems strange since there is a WEB-INF/classes in my WAR. Regardless, this is not a Boot problem per se, but more of a Jersey issue. From one of the Boot developers: The whole idea with Boot is that servlets are just a transport - they are a means to an end, and hopefully not the only one - the "container" is Spring, not the servlet container. We probably could add some form of support for SCI but only by hacking the containers since the spec really doesn't allow for much control of their lifecycle. It hasn't been a priority so far. Summary I hope this article is useful to see how you to upgrade your Java webapps to use Spring 4 and Spring Boot. I've created a boot-makeover project on GitHub with all the code mentioned. You can also view the commits for each step.

CMS, or content management systems, are platforms for managing and administering website content. There is no denying that CMSes are important in today's web ecosystem. These content management systems not only provide an easy way to build and maintain websites, but they also lend a helping hand in updating and editing website content without the need to spend hours or days writing and altering codes and scripts. Some of the leading CMSes are PHP-based, Ruby on Rails-based, ASP.NET-based, and Java-based. Among these, due to scalability, modernized architecture and open-source standards of a few, Java-based CMSs are getting quite a lot of attention lately, especially for enterprise websites, because of the scalable, modern, open source technology behind most of them. There are plenty of CMS tools based on Java to help developers create multi-lingual and multi-channel websites. But how do we decide on the best one for our use case? In this article, we’re going to explore the top 24 content management systems based on Java. Let’s have a look at each of them in detail: 1. Alfresco : Alfresco is one of the top open-source content management systems of Java. It comes with enterprise repository and portlet capabilities along with document management, collaboration, records management, knowledge management, web content management, imaging, and a lot more. Alfresco has a modular architecture and enables end users to efficiently manage websites across the cloud, mobile, hybrid and on-premise environments using open source Java technologies, such as Spring, Hibernate, Lucene and JSF. 2. Magnolia : Magnolia is a well-documented, easy to use, enterprise-grade open source CMS based on the Java Content Repository Standard. It is a highly popular CMS due to its out-of-the-box functionality and ease of use under an open source license. Moreover, Magnolia supports unique content delivery capabilities in a search-engine optimized manner and also follows W3C standards. Magnolia CMS has been deployed by enterprises and governments in more than 100 countries across the world. Here's a case study on Magnolia-based website development 3. LogicalDOC : Though less known than other software such as Alfresco, LogicalDOC is emerging as a powerful and more affordable alternative. With primary focus on Document Management, it offers very interesting content management, knowledge management and collaboration features, and all this in a really efficient way. A peculiar aspect of the interface is the use of Google GWT , this makes the user interface very responsive while the data transfer with the server is minimum. Also the availability of Free Apps for Android and Apple devices (iPhone and iPad) is an interesting feature. 4. Asbru: Asbru is another powerful, fully-featured, easy to use content management system with database-driven capabilities. It is built on the Spring framework with integrated community, databases, eCommerce and statistics modules, which helps developers to create, publish and manage rich and user-friendly internet, extranet and intranet websites on the go. Available in various editions, Asbru provides users with a simple, user-friendly platform to manage websites along with a host of other benefits and features such as custom templates and data, password protected content, multi-lingual content, communities, eCommerce and website analytics, a cutting-edge WYSIWYG content editor and a lot more. 5. OpenCMS : OpenCMS is based on Java and XML technology that allows you to build highly customizable and interactive websites and portals. It comes integrated with a WYSIWYG editor and fully-featured Template Engine which is fully compliant with W3C standards. OpenCMS can be deployed both in an open-source environment (Linux, Apache, Tomcat, MySQL) as well as a commercial environment (Windows NT, IIS, BEA Weblogic, Oracle) 6. Walrus: Walrus is yet another Spring-based CMS that provides unique and effective content management capabilities with a smart administrative interface and drag-and-drop facilities. Easy-to-setup and undo/redo features make Walrus a highly preferred and suitable CMS for government and non-profit enterprises. 7. Pulse : Pulse is a Java-based framework and portal solution that offers easy-to-use and extensible patterns for creating rich browser web applications and responsive websites. It brings a bunch of innovative and powerful components including content management, web shops, user management and more. A few of its key features include a WebDAV based virtual file system for digital asset management, mature user and role management, built-in internationalization, and more. 8. MeshCMS: MeshCMS is an easy to use online editing system written in Java. It comes with a host of features that you will find in any ideal content management system however, it uses a conventional approach in managing and editing website content. It is considered one of the fastest CMSes for editing files online, managing files, and building some very common components like menus, breadcrumbs, mail forms and so on. MeshCMS is accompanied by cross-browser capabilities, a WYSIWYG editor, hot-linking prevention, and tag-library that makes content management an interesting affair. 9. Liferay: Liferay is one of the most popular CMSes based on Java, and is recommended by many industry experts. It comes with awesome features that can make your content management tasks simple. Liferay is a very popular for developing personal as well as professional websites with ease. 10. DotCMS: DotCMS is a next-gen enterprise CMS that wears an open-source hat. It is highly popular and widely used CMS due to its open APIs, extensible and scalable architecture that it used to create personalized and engaging websites, intranets, extranets and applications with ease. 11. Jease: Jease highly known as ‘Java with ease’ is another open source content management system that is built on popular Java technologies like db40, Perst, Lucence and ZK. It is an extremely lightweight CMS with excellent Ajax interface. Due to its intuitive and interactive interface, it is highly simple and easy to customize and deploy websites in Jease even for inexperienced Java developers. 12. Hippo: Hippo is again a powerful open-source CMS made in Java that features enterprise level capabilities that helps in delivering personalized websites and channels. Hippo outlines its competitor by delivering outstanding customer experience through innovative solutions. Hippo has come a long way since 1999 serving medium to large organizations by offering a personalized multichannel content distribution platform including website, mobile, tablet, extranets and intranets. Its major version update was in December 2012 and since then it is seeing minor updates every couple of months. 13. Apache Lenya: Apache Lenya is another open-source Java CMS that features revision control , multisite management, scheduling, search, WYSIWYG editors, and workflow which makes website development and management quite interesting and easy for developers. Available in a variety of languages, Apache Lenya is highly preferred CMS among enterprises that desire to develop multi-lingual websites. 14. Contelligent: Conteligent is another smart CMS solution offered under Java technology stack. It is fully compliant with J2EE and offers great solution for creating and managing personalized websites. 15. InfoGlue: InfoGlue again is a Java-based CMS that is known for its advanced, scalable and robust open-source architecture. It is a highly flexible CMS built on JSR-168 and comes with full multi-language support, excellent information reuse and high integration capabilities. 16. OpenEdit: OpenEdit CMS is a dynamic tool for managing website content with online editing capabilities. Built in open-source architecture, OpenEdit provides facilities like user manager, file manager, version control and notification tools for managing media-rich websites. OpenCMS features enterprise grade plugins such as eCommerce, Content Management, Blog, Events Calendar, Social Networking Tools and more. 17. AtLeap: Atleap is a multi-lingual CMS based on Java which offers amazing content delivery assistance with SEO and full text search functionalities. AtLeap, a product of Blandware, is not only a CMS but a highly robust framework for developing website and web applications 18. Weceem: Weceem is yet another open source content management system, unlikely other CMS it is built upon well-known Java framework grails, spring and Java itself. Weceem has garner positive reviews and is an ideal CMS when it comes to grails, but faces tough competition in best Java CMS category. I came across a LinkedIn discussion which was enough for me to put this CMS in the Best Java CMS list. 19. Nuxeo: Nuxeno is a powerful open source CMS built on Java-based architecture. It offers solutions related to document management, case management and digital asset management. It is free from licensing free but do costs you when reach out for support and maintenance help. It has strong groups of customers including Electronic Arts, U.S. Navy and as stated on the company website, it’s been used in over 145 countries across thousands of organizations. 20. XperienCentral: Xperien central is currently the only CMS that offers unique content to a visitor as per his earlier journey, so you can tailor the content to increase the conversion. It offers multi-channel content delivery across website, mobile social media channels and applications. It is built on Java and hence it is extremely scalable and agile. 21 Atex: Atex is a web CMS that uses polopoly technology to deliver content. As per claims, it is the only industry leading CMS with built in paywall. Atex again is one of the premium CMS that offers amazing solutions for managing websites and helps marketers deliver the right content to relevant audiences. It has rich set of clientele. 22 Escenic: Customers of escenic include News of the World, The Sun, The Times, the Independent titles. It’s a closed source Java framework. Both Atex and Escenic are found to be highly popular in Sweden. Some of the biggest sites in Sweden use both these CMS. idg.se uses Atex and Aftonbladet.se uses Escenic 23. Adobe Experience Manager/ CQ5 : Best CMS list cannot be completed without including adobe experience manager. It is an all-round CMS which offers all kinds of agility and flexibility an organization may want. It helps deliver unique customer experience by delivering different content on different channels. Adobe Experience Manager was recently named a leader in web content management by Garnters magic quadrant. Earlier it was known as CQ5 but later was acquire by Adobe in 2010 24. SDL Tridion Again a well known CMS and highly recommended by industry experts. Its simple intuitive UI makes it simple to manage the content and deliver it uniformly across all channels. It recently received top score in overall content management experience according to an independent research firm - Forrester Research, Inc., This completes the list 23 top Java-based content management system. Hope after reading about all the CMS, you have got enough inferences and insight as to which CMS would be best for your website development project.

European countries are moving towards Single Euro Payments Area (SEPA) initiative and therefore a lot of companies are implementing International Bank Account Numbers (IBAN) or replacing existing bank account details with IBAN. Recently I was dealing with International Bank Account Numbers and couldn't find any open source library neither to generate them nor to validate them. To fill the gap I implemented iban4j Java library for International Bank Account Number (IBAN) generation and validation. Using iban4j is as easy as: Iban iban = new Iban.Builder() .countryCode(CountryCode.AT) .bankCode("19043") .accountNumber("00234573201") .build(); Library is available in maven central: org.iban4j iban4j 1.0.0 For more details check out github page

Jetty 9.1 is finally released, bringing Java WebSockets (JSR-356) to non-EE environments. It's awesome news and today's post will be about using this great new API along with Spring Framework. JSR-356 defines concise, annotation-based model to allow modern Java web applications easily create bidirectional communication channels using WebSockets API. It covers not only server-side, but client-side as well, making this API really simple to use everywhere. Let's get started! Our goal would be to build a WebSockets server which accepts messages from the clients and broadcasts them to all other clients currently connected. To begin with, let's define the message format, which server and client will be exchanging, as this simple Message class. We can limit ourselves to something like a String, but I would like to introduce to you the power of another new API - Java API for JSON Processing (JSR-353). package com.example.services; public class Message { private String username; private String message; public Message() { } public Message( final String username, final String message ) { this.username = username; this.message = message; } public String getMessage() { return message; } public String getUsername() { return username; } public void setMessage( final String message ) { this.message = message; } public void setUsername( final String username ) { this.username = username; } } To separate the declarations related to the server and the client, JSR-356 defines two basic annotations:@ServerEndpoint and @ClientEndpoit respectively. Our client endpoint, let's call itBroadcastClientEndpoint, will simply listen for messages server sends: package com.example.services; import java.io.IOException; import java.util.logging.Logger; import javax.websocket.ClientEndpoint; import javax.websocket.EncodeException; import javax.websocket.OnMessage; import javax.websocket.OnOpen; import javax.websocket.Session; @ClientEndpoint public class BroadcastClientEndpoint { private static final Logger log = Logger.getLogger( BroadcastClientEndpoint.class.getName() ); @OnOpen public void onOpen( final Session session ) throws IOException, EncodeException { session.getBasicRemote().sendObject( new Message( "Client", "Hello!" ) ); } @OnMessage public void onMessage( final Message message ) { log.info( String.format( "Received message '%s' from '%s'", message.getMessage(), message.getUsername() ) ); } } That's literally it! Very clean, self-explanatory piece of code: @OnOpen is being called when client got connected to the server and @OnMessage is being called every time server sends a message to the client. Yes, it's very simple but there is a caveat: JSR-356 implementation can handle any simple objects but not the complex ones like Message is. To manage that, JSR-356 introduces concept of encoders and decoders. We all love JSON, so why don't we define our own JSON encoder and decoder? It's an easy task which Java API for JSON Processing (JSR-353) can handle for us. To create an encoder, you only need to implementEncoder.Text< Message > and basically serialize your object to some string, in our case to JSON string, using JsonObjectBuilder. package com.example.services; import javax.json.Json; import javax.json.JsonReaderFactory; import javax.websocket.EncodeException; import javax.websocket.Encoder; import javax.websocket.EndpointConfig; public class Message { public static class MessageEncoder implements Encoder.Text< Message > { @Override public void init( final EndpointConfig config ) { } @Override public String encode( final Message message ) throws EncodeException { return Json.createObjectBuilder() .add( "username", message.getUsername() ) .add( "message", message.getMessage() ) .build() .toString(); } @Override public void destroy() { } } } For decoder part, everything looks very similar, we have to implement Decoder.Text< Message > and deserialize our object from string, this time using JsonReader. package com.example.services; import javax.json.JsonObject; import javax.json.JsonReader; import javax.json.JsonReaderFactory; import javax.websocket.DecodeException; import javax.websocket.Decoder; public class Message { public static class MessageDecoder implements Decoder.Text< Message > { private JsonReaderFactory factory = Json.createReaderFactory( Collections.< String, Object >emptyMap() ); @Override public void init( final EndpointConfig config ) { } @Override public Message decode( final String str ) throws DecodeException { final Message message = new Message(); try( final JsonReader reader = factory.createReader( new StringReader( str ) ) ) { final JsonObject json = reader.readObject(); message.setUsername( json.getString( "username" ) ); message.setMessage( json.getString( "message" ) ); } return message; } @Override public boolean willDecode( final String str ) { return true; } @Override public void destroy() { } } } And as a final step, we need to tell the client (and the server, they share same decoders and encoders) that we have encoder and decoder for our messages. The easiest thing to do that is just by declaring them as part of @ServerEndpoint and @ClientEndpoit annotations. import com.example.services.Message.MessageDecoder; import com.example.services.Message.MessageEncoder; @ClientEndpoint( encoders = { MessageEncoder.class }, decoders = { MessageDecoder.class } ) public class BroadcastClientEndpoint { } To make client's example complete, we need some way to connect to the server usingBroadcastClientEndpoint and basically exchange messages. The ClientStarter class finalizes the picture: package com.example.ws; import java.net.URI; import java.util.UUID; import javax.websocket.ContainerProvider; import javax.websocket.Session; import javax.websocket.WebSocketContainer; import org.eclipse.jetty.websocket.jsr356.ClientContainer; import com.example.services.BroadcastClientEndpoint; import com.example.services.Message; public class ClientStarter { public static void main( final String[] args ) throws Exception { final String client = UUID.randomUUID().toString().substring( 0, 8 ); final WebSocketContainer container = ContainerProvider.getWebSocketContainer(); final String uri = "ws://localhost:8080/broadcast"; try( Session session = container.connectToServer( BroadcastClientEndpoint.class, URI.create( uri ) ) ) { for( int i = 1; i <= 10; ++i ) { session.getBasicRemote().sendObject( new Message( client, "Message #" + i ) ); Thread.sleep( 1000 ); } } // Application doesn't exit if container's threads are still running ( ( ClientContainer )container ).stop(); } } Just couple of comments what this code does: we are connecting to WebSockets endpoint atws://localhost:8080/broadcast, randomly picking some client name (from UUID) and generating 10 messages, every with 1 second delay (just to be sure we have time to receive them all back). Server part doesn't look very different and at this point could be understood without any additional comments (except may be the fact that server just broadcasts every message it receives to all connected clients). Important to mention here: new instance of the server endpoint is created every time new client connects to it (that's why peers collection is static), it's a default behavior and could be easily changed. package com.example.services; import java.io.IOException; import java.util.Collections; import java.util.HashSet; import java.util.Set; import javax.websocket.EncodeException; import javax.websocket.OnClose; import javax.websocket.OnMessage; import javax.websocket.OnOpen; import javax.websocket.Session; import javax.websocket.server.ServerEndpoint; import com.example.services.Message.MessageDecoder; import com.example.services.Message.MessageEncoder; @ServerEndpoint( value = "/broadcast", encoders = { MessageEncoder.class }, decoders = { MessageDecoder.class } ) public class BroadcastServerEndpoint { private static final Set< Session > sessions = Collections.synchronizedSet( new HashSet< Session >() ); @OnOpen public void onOpen( final Session session ) { sessions.add( session ); } @OnClose public void onClose( final Session session ) { sessions.remove( session ); } @OnMessage public void onMessage( final Message message, final Session client ) throws IOException, EncodeException { for( final Session session: sessions ) { session.getBasicRemote().sendObject( message ); } } } In order this endpoint to be available for connection, we should start the WebSockets container and register this endpoint inside it. As always, Jetty 9.1 is runnable in embedded mode effortlessly: package com.example.ws; import org.eclipse.jetty.server.Server; import org.eclipse.jetty.servlet.DefaultServlet; import org.eclipse.jetty.servlet.ServletContextHandler; import org.eclipse.jetty.servlet.ServletHolder; import org.eclipse.jetty.websocket.jsr356.server.deploy.WebSocketServerContainerInitializer; import org.springframework.web.context.ContextLoaderListener; import org.springframework.web.context.support.AnnotationConfigWebApplicationContext; import com.example.config.AppConfig; public class ServerStarter { public static void main( String[] args ) throws Exception { Server server = new Server( 8080 ); // Create the 'root' Spring application context final ServletHolder servletHolder = new ServletHolder( new DefaultServlet() ); final ServletContextHandler context = new ServletContextHandler(); context.setContextPath( "/" ); context.addServlet( servletHolder, "/*" ); context.addEventListener( new ContextLoaderListener() ); context.setInitParameter( "contextClass", AnnotationConfigWebApplicationContext.class.getName() ); context.setInitParameter( "contextConfigLocation", AppConfig.class.getName() ); server.setHandler( context ); WebSocketServerContainerInitializer.configureContext( context ); server.start(); server.join(); } } The most important part of the snippet above is WebSocketServerContainerInitializer.configureContext: it's actually creates the instance of WebSockets container. Because we haven't added any endpoints yet, the container basically sits here and does nothing. Spring Framework and AppConfig configuration class will do this last wiring for us. package com.example.config; import javax.annotation.PostConstruct; import javax.inject.Inject; import javax.websocket.DeploymentException; import javax.websocket.server.ServerContainer; import javax.websocket.server.ServerEndpoint; import javax.websocket.server.ServerEndpointConfig; import org.eclipse.jetty.websocket.jsr356.server.AnnotatedServerEndpointConfig; import org.springframework.context.annotation.Bean; import org.springframework.context.annotation.Configuration; import org.springframework.web.context.WebApplicationContext; import com.example.services.BroadcastServerEndpoint; @Configuration public class AppConfig { @Inject private WebApplicationContext context; private ServerContainer container; public class SpringServerEndpointConfigurator extends ServerEndpointConfig.Configurator { @Override public < T > T getEndpointInstance( Class< T > endpointClass ) throws InstantiationException { return context.getAutowireCapableBeanFactory().createBean( endpointClass ); } } @Bean public ServerEndpointConfig.Configurator configurator() { return new SpringServerEndpointConfigurator(); } @PostConstruct public void init() throws DeploymentException { container = ( ServerContainer )context.getServletContext(). getAttribute( javax.websocket.server.ServerContainer.class.getName() ); container.addEndpoint( new AnnotatedServerEndpointConfig( BroadcastServerEndpoint.class, BroadcastServerEndpoint.class.getAnnotation( ServerEndpoint.class ) ) { @Override public Configurator getConfigurator() { return configurator(); } } ); } } As we mentioned earlier, by default container will create new instance of server endpoint every time new client connects, and it does so by calling constructor, in our caseBroadcastServerEndpoint.class.newInstance(). It might be a desired behavior but because we are usingSpring Framework and dependency injection, such new objects are basically unmanaged beans. Thanks to very well-thought (in my opinion) design of JSR-356, it's actually quite easy to provide your own way of creating endpoint instances by implementing ServerEndpointConfig.Configurator. TheSpringServerEndpointConfigurator is an example of such implementation: it's creates new managed bean every time new endpoint instance is being asked (if you want single instance, you can create singleton of the endpoint as a bean in AppConfig and return it all the time). The way we retrieve the WebSockets container is Jetty-specific: from the attribute of the context with name"javax.websocket.server.ServerContainer" (it probably might change in the future). Once container is there, we are just adding new (managed!) endpoint by providing our own ServerEndpointConfig (based onAnnotatedServerEndpointConfig which Jetty kindly provides already). To build and run our server and clients, we need just do that: mvn clean package java -jar target\jetty-web-sockets-jsr356-0.0.1-SNAPSHOT-server.jar // run server java -jar target/jetty-web-sockets-jsr356-0.0.1-SNAPSHOT-client.jar // run yet another client As an example, by running server and couple of clients (I run 4 of them, '392f68ef', '8e3a869d', 'ca3a06d0', '6cb82119') you might see by the output in the console that each client receives all the messages from all other clients (including its own messages): Nov 29, 2013 9:21:29 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Hello!' from 'Client' Nov 29, 2013 9:21:29 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #1' from '392f68ef' Nov 29, 2013 9:21:29 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #2' from '8e3a869d' Nov 29, 2013 9:21:29 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #7' from 'ca3a06d0' Nov 29, 2013 9:21:30 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #4' from '6cb82119' Nov 29, 2013 9:21:30 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #2' from '392f68ef' Nov 29, 2013 9:21:30 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #3' from '8e3a869d' Nov 29, 2013 9:21:30 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #8' from 'ca3a06d0' Nov 29, 2013 9:21:31 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #5' from '6cb82119' Nov 29, 2013 9:21:31 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #3' from '392f68ef' Nov 29, 2013 9:21:31 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #4' from '8e3a869d' Nov 29, 2013 9:21:31 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #9' from 'ca3a06d0' Nov 29, 2013 9:21:32 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #6' from '6cb82119' Nov 29, 2013 9:21:32 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #4' from '392f68ef' Nov 29, 2013 9:21:32 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #5' from '8e3a869d' Nov 29, 2013 9:21:32 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #10' from 'ca3a06d0' Nov 29, 2013 9:21:33 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #7' from '6cb82119' Nov 29, 2013 9:21:33 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #5' from '392f68ef' Nov 29, 2013 9:21:33 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #6' from '8e3a869d' Nov 29, 2013 9:21:34 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #8' from '6cb82119' Nov 29, 2013 9:21:34 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #6' from '392f68ef' Nov 29, 2013 9:21:34 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #7' from '8e3a869d' Nov 29, 2013 9:21:35 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #9' from '6cb82119' Nov 29, 2013 9:21:35 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #7' from '392f68ef' Nov 29, 2013 9:21:35 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #8' from '8e3a869d' Nov 29, 2013 9:21:36 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #10' from '6cb82119' Nov 29, 2013 9:21:36 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #8' from '392f68ef' Nov 29, 2013 9:21:36 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #9' from '8e3a869d' Nov 29, 2013 9:21:37 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #9' from '392f68ef' Nov 29, 2013 9:21:37 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #10' from '8e3a869d' Nov 29, 2013 9:21:38 PM com.example.services.BroadcastClientEndpoint onMessage INFO: Received message 'Message #10' from '392f68ef' 2013-11-29 21:21:39.260:INFO:oejwc.WebSocketClient:main: Stopped org.eclipse.jetty.websocket.client.WebSocketClient@3af5f6dc Awesome! I hope this introductory blog post shows how easy it became to use modern web communication protocols in Java, thanks to Java WebSockets (JSR-356), Java API for JSON Processing (JSR-353) and great projects such as Jetty 9.1! As always, complete project is available on GitHub.

Data access, specifically SQL access from within Java, has never been nice. This is in large part due to the fact that the JDBC api has a lot of ceremony. Java 7 vastly improved things with ARM blocks by taking away a lot of the ceremony around managing database objects such as Statements and ResultSets but fundamentally the code flow is still the same. Java 8 Lambdas gives us a very nice tool for improving the flow of JDBC. Out first attempt at improving things here is very simply to make it easy to work with ajava.sql.ResultSet. Here we simply wrap the ResultSet iteration and then delegate it to Lambda function. This is very similar in concept to Spring's JDBCTemplate. NOTE: I've released All the code snippets you see here under an Apache 2.0 license on Github. First we create a functional interface called ResultSetProcessor as follows: @FunctionalInterface public interface ResultSetProcessor { public void process(ResultSet resultSet, long currentRow) throws SQLException; } Very straightforward. This interface takes the ResultSet and the current row of theResultSet as a parameter. Next we write a simple utility to which executes a query and then calls ourResultSetProcessor each time we iterate over the ResultSet: public static void select(Connection connection, String sql, ResultSetProcessor processor, Object... params) { try (PreparedStatement ps = connection.prepareStatement(sql)) { int cnt = 0; for (Object param : params) { ps.setObject(++cnt, param)); } try (ResultSet rs = ps.executeQuery()) { long rowCnt = 0; while (rs.next()) { processor.process(rs, rowCnt++); } } catch (SQLException e) { throw new DataAccessException(e); } } catch (SQLException e) { throw new DataAccessException(e); } } Note I've wrapped the SQLException in my own unchecked DataAccessException. Now when we write a query it's as simple as calling the select method with a connection and a query: select(connection, "select * from MY_TABLE",(rs, cnt)-> { System.out.println(rs.getInt(1)+" "+cnt) }); So that's great, but I think we can do more... One of the nifty Lambda additions in Java is the new Streams API. This would allow us to add very powerful functionality with which to process a ResultSet. Using the Streams API over a ResultSet however creates a bit more of a challenge than the simple select with Lambda in the previous example. The way I decided to go about this is create my own Tuple type which represents a single row from a ResultSet. My Tuple here is the relational version where a Tuple is a collection of elements where each element is identified by an attribute, basically a collection of key value pairs. In our case the Tuple is ordered in terms of the order of the columns in the ResultSet. The code for the Tuple ended up being quite a bit so if you want to take a look, see the GitHub project in the resources at the end of the post. Currently the Java 8 API provides the java.util.stream.StreamSupport object which provides a set of static methods for creating instances of java.util.stream.Stream. We can use this object to create an instance of a Stream. But in order to create a Stream it needs an instance ofjava.util.stream.Spliterator. This is a specialised type for iterating and partitioning a sequence of elements, the Stream needs for handling operations in parallel. Fortunately the Java 8 api also provides the java.util.stream.Spliterators class which can wrap existing Collection and enumeration types. One of those types being ajava.util.Iterator. Now we wrap a query and ResultSet in an Iterator: public class ResultSetIterator implements Iterator { private ResultSet rs; private PreparedStatement ps; private Connection connection; private String sql; public ResultSetIterator(Connection connection, String sql) { assert connection != null; assert sql != null; this.connection = connection; this.sql = sql; } public void init() { try { ps = connection.prepareStatement(sql); rs = ps.executeQuery(); } catch (SQLException e) { close(); throw new DataAccessException(e); } } @Override public boolean hasNext() { if (ps == null) { init(); } try { boolean hasMore = rs.next(); if (!hasMore) { close(); } return hasMore; } catch (SQLException e) { close(); throw new DataAccessException(e); } } private void close() { try { rs.close(); try { ps.close(); } catch (SQLException e) { //nothing we can do here } } catch (SQLException e) { //nothing we can do here } } @Override public Tuple next() { try { return SQL.rowAsTuple(sql, rs); } catch (DataAccessException e) { close(); throw e; } } } This class basically delegates the iterator methods to the underlying result set and then on the next() call transforms the current row in the ResultSet into my Tuple type. And that's the basics done (This class will need a little bit more work though). All that's left is to wire it all together to make a Stream object. Note that due to the nature of a ResultSet it's not a good idea to try process them in parallel, so our stream cannot process in parallel. public static Stream stream(final Connection connection, final String sql, final Object... parms) { return StreamSupport .stream(Spliterators.spliteratorUnknownSize( new ResultSetIterator(connection, sql), 0), false); } Now it's straightforward to stream a query. In the usage example below I've got a table TEST_TABLE with an integer column TEST_ID which basically filters out all the non even numbers and then runs a count: long result = stream(connection, "select TEST_ID from TEST_TABLE") .filter((t) -> t.asInt("TEST_ID") % 2 == 0) .limit(100) .count(); And that's it! We now have a very powerful way of working with a ResultSet. So all this code is available under an Apache 2.0 license on GitHub here. I've rather lamely dubbed the project "lambda tuples," and the purpose really is to experiment and see where you can take Java 8 and Relational DB access, so please download or feel free to contribute.

This is a code snippet to retrieve the path of the current running web application project in java public String getPath() throws UnsupportedEncodingException { String path = this.getClass().getClassLoader().getResource("").getPath(); String fullPath = URLDecoder.decode(path, "UTF-8"); String pathArr[] = fullPath.split("/WEB-INF/classes/"); System.out.println(fullPath); System.out.println(pathArr[0]); fullPath = pathArr[0]; String reponsePath = ""; // to read a file from webcontent reponsePath = new File(fullPath).getPath() + File.separatorChar + "newfile.txt"; return reponsePath; }