For readability’s sake, it’s almost always a good idea to replace magic numbers and string literals with constants. That’s all good, but it can take a bit of time to refactor these to constants, especially strings or parts of strings. For example, in the code below we want to refactor “shovel and spade” to a private static final String called TOOLS. To do that manually would take some time. It goes even slower if we only want to extract “spade” to a constant because we first have to convert the string to a concatenation. String tools = "shovel and spade"; ... String otherTools = "shovel and spade"; Luckily, Eclipse has a couple of ways to instantly convert literals to constants. Coupled with tools to speed up string selection and to pick out part of a string, you have the ability to create a constant in about 2 seconds flat. I’ll discuss all these features below. Extract a constant from a string/number There are 2 ways to extract a constant, the one uses a quick fix and the other a refactoring. I’ll show the quick fix method first and then the refactoring and discuss the (small) differences between the two. The example uses a string, but everything is true for numbers as well. Follow these steps to use the quick fix: First select the string. The fastest way is to place the cursor on the string and press Alt+Shift+Up (Select Enclosing Element; a nifty shortcut that I discuss in Select strings and methods with a single keystroke). After selecting the string, press Ctr+1 (Quick Fix) and then select Extract to constant. Eclipse will do the following: (a) Create a private final static variable of type String with a default name, (b) replace all occurrences of that string with the constant and (c) place the cursor on the constant’s declaration to give you a chance to change the name, type and visibility of the variable using placeholders that you can Tab through. Once you’re happy with the constant details, press Enter to go back to the line on which you initiated the quick fix. Here’s a short video with an example of using quick fix. We’ll extract a constant (called TOOLS) from a string literal (“shovel and spade”) that’s used in two places. Note: You can use Tab to move from one placeholder to another and pressing Enter will get you back to your original line. The other way to extract a constant is by using the Extract Constant refactoring. Again, select the string, then select Refactor > Extract Constant… (Alt+T, A) from the application menu. A dialog appears prompting you for the constant’s name, its visibility and whether to replace all occurrences of the string with the constant. After you’ve entered the details, press Enter and you’ll have your constant defined. Here’s a short video with an example using refactoring. We’ll use the same example as above. The differences between the two? Not much, the biggest difference being when you enter the details of the constant (ie. before the change is made or after). The refactoring dialog also provides an option to add the qualifying type name before the constant’s usage, but most of time this is redundant. I’d recommend using the quick fix, unless you’re more comfortable with dialogs. BTW, you can assign custom keyboard shortcuts to either command by mapping either Quick Assist – Extract Constant or the command Extract Constant. Pick out part of a string Sometimes you’ll want to break up a string into multiple parts and convert one of those parts into a constant. Eclipse can do this automatically. Select the part of the string you want to pick out (don’t worry about quotes), press Ctrl+1 and choose Pick out selected part of String. Eclipse will convert that part into a string with quotes, concatenate it to the rest of the string and select it. You can then use any of the Extract Constant tools above. Here’s an example of how to use this feature. Notice how the string’s already selected so we can use the Extract Constant quick fix immediately. Related Tips Select entire strings and methods in Eclipse with a single keystroke Convert string concatenations into StringBuilder or MessageFormat calls with Eclipse’s Quick Fix How to manage keyboard shortcuts in Eclipse and why you should Join/split if statements and rearrange expressions using Eclipse Quick Fix More tips on using quick fixes and making editing faster.

The purpose of this article is to give you the details of our 100 node cluster demo. This demo is recorded and you can watch the 5 minute screencast Hazelcast is an open source clustering and highly scalable data distribution platform for Java. JVMs that are running Hazelcast will dynamically cluster and allow you to easily share and partition your application data across the cluster. Hazelcast is a peer-to-peer solution (there is no master node, every node is a peer) so there is no single point of failure. Communication among cluster members is always TCP/IP with Java NIO beauty. The default configuration comes with 1 backup so if a node fails, no data will be lost (you can specify the backup count). It is as simple as using java.util.{Map, Queue, Set, List}. Just add the hazelcast.jar into your classpath and start coding. When you download the Hazelcast, you will find a test.sh under bin directory. The test.sh runs an application which randomly makes 40% get, 40% put and 20% remove on a distributed map. In this demo the same test application will be used to see how it performs on 100 node cluster. Amazon EC2 and S3 An easy to use and scalable cloud environment was needed for demo so we decided to use Amazon EC2 for server instances (nodes) and S3 service to store demo application zip and configuration files. With its newly announced Java SDK, it is very simple to start/stop server instances and upload files to S3 programatically. Hazelcast AMI & Launcher The challenge here is that we are running an application on 100 nodes and dealing with each and every server in the cluster is a huge task. We don't want to ssh into every server and manually start the application. This part is automated by creating a special server image (AMI). The AMI contains Java Runtime and a launcher application we developed, which will download the demo application from Amazon S3, unzip it, and run the hazelcast/bin/test.sh in it. The Launcher is actually so generic that it can run any application; it doesn't care/know what test.sh contains. Deployer Deployment of the demo application is also automated so that we don't need to login into AWS Management Console and manually start instances. Deployer instantiates any number of Amazon EC2 servers with any AMI and also uploads the demo application zip file to S3. So the idea here is that, the Deployer will store the application into S3 and launch 100 EC2 instances with our image. The Launcher on each instance will download the application from S3 and run it. Demo Details. The smallest EC2 instances (m1.small) are used to run the demo. These are the virtual instances with CPU about 1.0 GHz. Also keep in mind that EC2 platform suffers from considerable amount of network latency. That's why we increased the thread count to 250 in our application. The following steps performed during the demo Download hazelcast-1.8.3.zip from www.hazelcast.com. Unzip the file and move the monitoring war file into tomcat6/webapps directory. Edit the test.sh under the bin directory: Add -Xmx1G -Xms1G Add -Dhazelcast.initial.wait.seconds=100 to make the cluster evenly partition on start so that migration can be avoided for better performance. Add t250 as an argument to the application to set thread count to 250. Remember the latency issue. Run the Deployer from IDE. Check from EC2 Management Console if 100 servers started. Start tomcat. Copy the public DNS name of one of the servers to connect to from monitoring tool. Go to http://localhost:8080/hazelcast-monitor-1.8.3/ (Hazelcast Monitoring Tool). Paste the address and connect to the cluster. Enjoy! Results You should always look for programatic ways of launching applications on the cloud. With these tools we were able to deploy and run the demo application on 100 servers in minutes. The entire Hazelcast cluster was making over 400,000 operations per second on the smallest EC2 instances. In our next demo we will experiment Hazelcast on large data set and even bigger cluster. Watch the screencast

once you’ve configured eclipse preferences to your heart’s content, you’ll often want to share those preferences across multiple workspaces. now normally you can go to file > export > general > preferences to save your preferences to a properties file which you can then import into the other workspace. this will share settings such as your customised keyboard shortcuts, formatting, repository settings, etc. but, for some reason, eclipse doesn’t save perspective/window layouts, such as which views are open and where they are placed in the perspective. so you’ll find yourself spending another half hour configuring the window to the way you like it. after the 3rd workspace you need to create, this becomes frustrating and just wastes time. fortunately there are ways to save and restore these settings automatically. the first is to save the perspective into the preferences and the other is to use eclipse’s copy settings feature when opening the other workspace. i prefer the first option, but i’ll mention the second option and when to use the one over the other. method 1: save the layout as a new perspective the first method is to save the perspective layout as another perspective, then export the preferences file as normal. the saved perspective’s settings will be included in the preferences file. when you’ve updated the layout, just resave and overwrite the perspective and export the preferences again. to save your perspective, select window > save perspective as… from the application menu. a dialog should popup (shown below), prompting you for a perspective name. enter a name that you’ll remember, eg. my java or debug jack . click ok once you’ve entered a new name. note : you can choose to overwrite one of the default perspectives, eg. java , without fear. however, i prefer to leave these intact, so always choose a new name, but you can choose whatever works for you. now you can go through the normal routine of exporting the preferences to a properties file via file > export > general > preferences . then import the same file in another workspace via file > import > general > preferences . all you now have to do is switch over to the perspective you saved and all your layout settings will be restored. if you overwrote one of the default perspectives, you may have to select window > reset perspective… to restore the saved settings. if you’ve chosen to create a new perspective, be sure to point your run/debug settings to the new perspective under window > preferences > run/debug > perspectives . for example, if you made a new perspective based on the debug perspective, then you’ll need to change references to the debug perspective to the my debug for launchers you use. luckily this is only required once as these settings are also saved when you export preferences (at least since eclipse 3.5). gotcha: i use fast views a lot , and for some reason the fast view dock’s position isn’t restored automatically. but manually restoring this is as easy as moving the dock, so it’s not that bad. toolbar settings aren’t saved either, but i haven’t tampered with these a lot anyway since i prefer using the keyboard and mouse gestures. method 2: use copy settings the other method of saving your window layout is to use the copy settings feature when switching to another workspace. to use this feature, first open the workspace that contains your customised layout. then select file > switch workspace > other… which will open a dialog prompting you for an existing/new workspace. select the workspace, then click the copy settings collapsible section. select the workbench layout checkbox and click ok. your workspace will open and should reflect the customised layout of the previous workspace. here’s what the dialog looks like: which method should i use? well, as i said before, i prefer the first method for a number of reasons. if some of these apply to you then you might want to use the first method as well. use this method if: you want to share layout settings across workspaces on different machines, eg. work and home. this method is a lot more portable because you only need one single properties file. you spend 90% of your time in 1 or 2 perspectives (eg. java & debug) then this method works well because you only have to manage those perspectives. you make a lot temporary changes to perspectives that you don’t necessarily want shared. for example, if you’ve opened a number of views that you rarely use, you don’t want to clutter your new workspace with these views. i find that i have my “base” perspective layout, around which things will change depending on the context and i don’t want these to clutter my “base” layout. you want to share preferences with a colleague/friend. use the copy settings method if: you want to quickly create another workspace with the saved layout without having to export any preferences. you have made a number of changes across many perspectives and you want to restore those settings. you’re feeling lazy. with this method, eclipse manages a lot more things, so it’s a bit easier to manage (in the short-term), but for the longer term, the first method is best. from http://eclipseone.wordpress.com

It seems to me that Aspect Oriented Programming never really took off when it was introduced. However, it's a useful way to intercept, or analyse, methods as they happen, in an independent way. Eclipse has a useful suite of AspectJ tools that you can download for your Eclipse installlation. Paired with the benefits of Eclipse's plug-in system, aspects are a nice way of intercepting your RCP application. The following instructions show how to get up and running with aspects in the Plug-in Development Environment really quickly. Once you have downloaded the Eclipse AspectJ tools, you will also want to include the Equinox Aspect jars in your plug-ins directory. The plug-ins you will need are org.eclipse.equinox.weaving.aspectj and org.eclipse.equinox.weaving.hook Create a new OSGi plug-in: Right click on the project and choose AspectJ Tools/Convert to AspectJ Project Create a new package within the plugin eg. com.dzone.aspects.aspectTest Make a new aspectj Aspect within the package e.g. MyAspect In your manifest.mf export the package created in the previous step Export-Package: com.dzone.aspects A you write your AspectJ code, you will be advising another plug-in (for example org.eclipse.jdt.junit) You'll need to do some extra setup in order to advise other plug-ins, by adding the following to your Aspect plug-in manifest.mf. Eclipse-SupplementBundle: org.eclipse.jdt.junit Note you can only supplement one bundle in an aspect. Therefore, if you want to crosscut another bundle, you’ll need to create a new AspectJ plug-in. It also helps to add the plugin that you are advising (org.eclipse.jdt.junit) to your aspect plugin's dependencies. If you don't do it you will get lint warnings from the AspectJ compiler In your plugins META-INF directory make a file called aop.xml, consisting of content similar to the following When executing use the following VM arguments in your Run Configuration -Dosgi.framework.extensions=org.eclipse.equinox.weaving.hook -Dorg.aspectj.osgi.verbose=true It's as simple as that. Have you any instructions to add to this?

Perhaps the most striking thing about about the Play! framework is that its biggest advantage over other Java web application development frameworks does not fit into a neat feature list, and is only apparent after you have used it to build something. That advantage is usability. Note that usability is separate from functionality. In what follows, I am not suggesting that you cannot do this in some other framework: I merely claim that it is easier and more pleasant in Play! I need to emphasise this because geeks often have a total blind spot for usability because they enjoying figuring out difficult things, and under-appreciate the value of things that Just Work. Written by web developers for web developers The first hint that something different is going on here is when you first hear that the Play! framework is 'written by web developers for web developers', an unconventional positioning that puts the web's principles and conventions first and Java's second. Specifically, this means that the Play! framework is more in line with the W3C's Architecture of the World Wide Web than it is with Java Enterprise Edition (Java EE) conventions. URLs for perfectionists For example, the Play! framework, like other modern web frameworks, provides first-class support for arbitrary 'clean' URLs, which has always been lacking from the Servlet API. It is no coincidence that at the time of writing, Struts URLs for perfectionists, a set of work-arounds for the Servlet API-based Struts 1.x web framework, remains the third-most popular out of 160 articles on www.lunatech-research.com despite being a 2005 article about a previous-generation Java web technology. In Servlet-based frameworks, the Servlet API does not provide useful URL-routing support; Servlet-based frameworks configure web.xml to forward all requests to a single controller Servlet, and then implement URL routing in the framework, with additional configuration. At this point, it does not matter whether the Servlet API was ever intended to solve the URL-routing problem and failed by not being powerful enough, or whether it was intended to be a lower-level API that you do not build web applications in directly. Either way, the result is the same: web frameworks add an additional layer on top of the Servlet API, itself a layer on top of HTTP. Play! combines the web framework, HTTP API and the HTTP server, which allows it to implement the same thing more directly with fewer layers and a single URL routing configuration. This configuration, like Groovy's and Cake PHP's, reflects the structure of an HTTP request - HTTP method, URL path, and then the mapping: # Play! 'routes' configuration file… # Method URL path Controller GET / Application.index GET /about Application.about POST /item Item.addItem GET /item/{id} Item.getItem GET /item/{id}.pdf Item.getItemPdf In this example, there is more than one controller. We also see the use of an id URL parameter in the last two URLs. HttpServletRequest Another example is Play!'s Http.Request class, which is a far simpler than the Servlet API's HttpServletRequest interface. In addition, Play! uses a class where Java EE 6 uses the Java EE convention of using an interface. This interface is also split between HttpServletRequest and the more generic ServletRequest interface. This separation may be useful if you want to use Servlets for things other than web applications, or if you want to allow for the unlikely possibility of the web changing protocol, but for most of us it is merely irrelevant complexity. In other words, the Servlet API is always used with a framework on top these days because it is sub-optimised for building web applications, which is what all of us actually use it for. Play! fixes that. Better usability is not just for normal people Another way of looking at the idea that Play! is by and for web developers is to consider how a web developer might approach software design differently to a Java EE developer. When you write software, what is the primary interface? If you are a web developer, the primary interface is a web-based user-interface constructed with HTML, CSS and (increasingly) JavaScript. A Java EE developer, on the other hand, may consider their primary interface to be a Java API, or perhaps a web services API, for use by other layers in the system. This difference is a big deal, because a Java interface is intended for use by other programmers, while a web user-interface interface is intended for use by non-programmers. In both cases, good design includes usability, but usability for normal people is not the same as usability for programmers. In a way, usability for everyone is a higher standard than usability for programmers, when it comes to software, because programmers can cope better with poor usability. This is a bit like the Good Grips kitchen utensils: although they were originally designed to have better usability for elderly people with arthritis, it turns out that making tools easier to hold is better for all users. The Play! framework is different because the usability that you want to achieve in your web application is present in the framework itself. For example, the web interface to things like the framework documentation and error messages shown in the browser is just more usable. Along similar lines, the server's console output avoids the pages full of irrelevant logging and pages of stack traces when there is an error, leaving more focused and more usable information for the web developer. $ play run phase ~ _ _ ~ _ __ | | __ _ _ _| | ~ | '_ \| |/ _' | || |_| ~ | __/|_|\____|\__ (_) ~ |_| |__/ ~ ~ play! 1.0, http://www.playframework.org ~ ~ Ctrl+C to stop ~ Listening for transport dt_socket at address: 8000 10:15:58,629 INFO ~ Starting /Users/peter/Documents/work/workspace/phase 10:16:00,007 WARN ~ You're running Play! in DEV mode 10:16:00,424 INFO ~ Listening for HTTP on port 9000 (Waiting a first request to start) ... 10:16:11,847 INFO ~ Connected to jdbc:hsqldb:mem:playembed 10:16:13,448 INFO ~ Application 'phase' is now started ! 10:16:14,825 INFO ~ starting DispatcherThread 10:16:48,168 ERROR ~ @61lagcl6i Internal Server Error (500) for request GET /application/startprocess?account=x Java exception (In /app/controllers/Application.java around line 41) IllegalArgumentException occured : Person not found for account x play.exceptions.JavaExecutionException: Person not found for account x at play.mvc.ActionInvoker.invoke(ActionInvoker.java:200) at Invocation.HTTP Request(Play!) Caused by: java.lang.IllegalArgumentException: Person not found for account x at controllers.Application.startProcess(Application.java:41) at play.utils.Java.invokeStatic(Java.java:129) at play.mvc.ActionInvoker.invoke(ActionInvoker.java:127) ... 1 more Try to imagine a JSF web application producing a stack trace this short. In fact, Play! goes further: instead of showing the stack trace, the web application shows the last line of code within the application that appears in the stack trace. After all, what you really want to know is where things first went wrong in your own code. This kind of usability does not happen by itself; the Play! framework goes to considerable effort to filter out duplicate and irrelevant information, and focus on what is essential. Quality is in the details In the Play! framework, much of the quality turns out to be in the details: they may be small things individually, rather than big important features, but they add up to result in a more comfortable and more productive development experience. The warm feeling you get when building something with Play! is the absence of the frustration that usually results from fighting the framework. We recommend that you go to http://www.playframework.org/, download the latest binary release, and spend half an hour on the tutorial. Peter Hilton is a senior software developer at Lunatech Research.

You’ll often need to add a constructor to a class based on some/all of its fields or even based on constructors of its superclass. Take the following code: public class Contact { private String name, surname; private int age; public Contact(String name, String surname, int age) { this.name = name; this.surname = surname; this.age = age; } } That’s 5 lines of code (lines 5-9) just to have a constructor. You could write them all by hand, but writing a constructor that accepts and initialises each field takes a lot of time and becomes irritating after a while. And creating constructors from a superclass can take even longer because the superclass can define multiple constructors that you need to reimplement. That is why Eclipse has two features to help you generate these constructor instantly: Generate Constructor using Field and Generate Constructor from Superclass. Both features will generate a constructor in seconds, freeing you up to get to the exciting code. You’ll also see how to add/remove/reorder arguments of an existing constructor based on fields defined in the class. Generate a constructor from fields The fastest way to generate a constructor based on fields is to press Alt+Shift+S, O (alternatively select Source > Generate Constructor using Fields… from the application menu). This pops up a dialog where you can select the fields you want to include in the constructor arguments. Once you’ve selected the fields you want, just click Ok and you’re done. BTW, Alt+Shif+S is the shortcut to display a shortened Source menu, allowing Java source editing commands. The following video shows an example of how much time this feature can save you. We’ll create a constructor for the class Message. Notes: You can additionally call a superclass constructor with a subset of the fields by changing the dropdown Select super constructor to invoke at the top of the dialog. This creates a super(…) call with the relevant arguments and initialising code for the rest of the arguments on your subclass’s constructor. If you don’t want the JavaDoc for the constructor, disable the checkbox Generate constructor comments on the dialog. You can include/exclude the calls to super() using the checkbox Omit call to default constructor super(), on the dialog. You have to be positioned in a class to invoke this command. If you use frequently use this command, you can remap its keyboard shortcut by changing the key binding for the command Generate Getters and Setters. Generate constructor(s) from a superclass Sometimes you’ll want to reimplement some/all of a superclass’s constructors, especially as part of the contract. To generate constructor(s) from a superclass, just press Alt+Shift+S, C (or alternatively select Source > Generate Constructor from Superclass… from the application menu). A dialog pops up allowing you to select the constructor(s) you’d like to create. Once you click Ok, Eclipse generates the constructor, together with a super() call. Here’s an example of how to create a constructor in SecretMessage, that inherits from the class Message. Message has three constructors: a default one, one that accepts one String (content) and another that accepts three Strings (content, fromAddress and toAddress). SecretMessage should only expose the last two constructors. Note: You have to be positioned in a class to invoke this command. If you use this command frequently, you can remap its keyboard shortcut by changing the key binding for the command Generate constructors from superclass. Add, reorder and remove fields on existing constructors If you have an existing constructor and want to reorder its arguments or remove some of them, have a look at the Change Method Signature refactoring that does that in a jiffy. If you want to add a single field to an existing constructor, have a look at the next video that uses Eclipse’s Quick Fix (Ctrl+1) to do that easily. I’ll add a field createdDate to an existing constructor in Message by choosing Assign parameter to field from the Quick Fix menu while positioned on the field. From http://eclipseone.wordpress.com

we all know that java statements are terminated by a semicolon (;), but they’re a bit of a pain to add to the end of a line. one way would be to press end (to move to the end of the line) then press semicolon, but this is tedious. because this is something that you do often it’s worth learning how to do this faster. it’s a good thing eclipse can automatically put the semicolon at the end of the line, no matter where you are in the statement. it’s as easy as setting one preference and there’s a bonus preference for adding braces to the correct position as well. for something so small, it saves a lot of time. so in the example below, if you imagine that your cursor is placed after the word blue since you were editing the string. pressing semicolon will cause eclipse to place the semicolon after the closing bracket at the end. nice. system.out.println("the house is blue") how to set the semicolon preference the preference is disabled by default, so you have to enable it. go to window > preferences > java > typing . then enable semicolons under the section automatically insert at correct position . now when you press semicolon from anywhere in a statement, eclipse adds a semicolon to the end of the line and places the cursor right after the semicolon so you can start editing the next line. the preference should look like this: notes: sometimes you’d want to add a semicolon to a string literal instead of at the end of the line. eclipse caters for this by allowing you to press backspace after you pressed semicolon. pressing backspace will remove the semicolon from the end of the line, move your cursor to the original position in the string and add the semicolon to the string. if there’s already a semicolon at the end of the line, eclipse won’t try to add another to the end. it will just add the semicolon to wherever you placed it. eclipse is smart enough to know that for for loops you’d want to add the semicolon to the middle of the statement (eg. when editing the initialiser, condition and increment code). bonus tip: you can also add braces automatically at the correct position by selecting the braces option on the preference page. this comes in handy when your coding standards require braces to be on the same line as the control structure statement. for example, when adding a for or while loop, you can type { at any place in the first line and eclipse will insert it at the end of the line. from http://eclipseone.wordpress.com

I'm working on updating the NetBeans IDE Keyboard Shortcut Card (which you can always find under the "Help" menu in the IDE) and have learned about a lot of shortcuts I never knew about before. Here's a grab bag of things I have added to the shortcut card (some new, some old that hadn't been included before) that you might find interesting too. Type "fcom" (without the quotes, same as all the rest below) and then press Tab. You now have this, i.e., a brand new code fold: // // Type "bcom" and then press Tab to create the start of a new set of comments in your code: /**/ Type "runn" and press Tab and you'll have all of this: Runnable runnable = new Runnable() { public void run() { } }; If I have this: String something = ""; ...and then below that type "forst" and press Tab, I now have this: String something = ""; for (StringTokenizer stringTokenizer = new StringTokenizer(something); stringTokenizer.hasMoreTokens();) { String token = stringTokenizer.nextToken(); } Also, experiment with "forc", "fore", "fori", "forl", and "forv"! I always knew that "sout" turns into "System.out.println("");" but did you know that (again assuming you first have a string something like above) if you type "soutv" you end up with this: System.out.println("something = " + something); Thanks Tom Wheeler for this tip. Next, here are the new shortcuts that are new from NetBeans IDE 6.9 onwards: as - assert=true; su - super db - double sh - short na - native tr - transient vo - volatile I knew that "ifelse" would resolve to an if/else block. But did you know that if you don't need an 'else', you can simply type "iff", press Tab, and then end up with this: if (exp) { } From NetBeans IDE 6.9 onwards, the "sw" shortcut expands to the following: switch (var) { case val: break; default: throw new AssertionError(); } If you're using while loops, experiment with "whileit", "whilen", and "whilexp". Always remember these: "im" expands to "implements; "ex" to "extends". Other tips along these lines are more than welcome here on NetBeans Zone!

electric cloud has recently developed several unique capabilities for its software production suite, and now the company has built these technologies into the newest versions of their electricaccelerator and electriccommander products, which were released this week. electricaccelerator 5.0 has added two major features. the "electrify" feature can now parallel process virtually any software production task, and the new subbuild feature avoids unnecessary builds. electriccommander 3.5 features a new, extensible interface for managing and automating a shop's existing tool infrastructure. electricaccelerator 5.0 electricaccelerator speeds up make, nmake, microsoft visual studio, and apache ant based builds (by 10-20x the company says) by parallelizing them and running them on a computer cluster. accelerator 5.0 is the full debut of electric cloud's patented technology to safely speed up development tasks through its parallel processing via public or private compute clouds. originally, accelerator's parallel processing applied only to software builds, but now it applies to other tools and development tasks in the build-test-deploy cycle including parallel testing and data modeling. electrify creates an all-purpose private compute cloud for parallel processing, but parallel processing can also be done on desktops or a dedicated server. another innovative addition to accelerator is the subbuilds feature. first previewed in electric cloud's free spark build tool , subbuilds allow unnecessary build avoidance. subbuilds are able to skip large swaths of the build tree by building only the relevant pieces to the current work. the result is fewer broken builds and the ability to compile and test quickly and frequently without affecting the rest of the team. the dependency graph below shows the agent component (util, xml, http libraries, and the agent application code) as solid. sparkbuild can recognize that only this component needs to be rebuilt. electricaccelerator 5.0 now supports build tools such as msbuild and scons along with homegrown systems. teams that standardize on scons, for example, can use less hardware and provide faster builds than individual mutli-core servers by applying the benefits of centralization. the virtualization capabilities of accelerator also allow easier support for multiple configurations. electriccommander 3.5 electriccommander is a web-based application for defining and executing distributed processes in the build-test-deploy cycle. in a development environment using many disparate tools, commander 3.5 can remove the need to learn multiple interfaces, and it manages those tools from a central, custom ui. electriccommander 3.5 can be configured to extract and display data from the defect tracker, relevant build results, and test results. this lets build managers track the status of fixes and be notified when qa resolves the issue. the commander ui's custom, dynamic screens can help developers create and execute a build or test request using the right parameters. commander 3.5 can give developers a custom interface based on their role in the production cycle. 3.5 also provides tools to create custom plug-ins for third-party integrations. electriccommander job plotter to try out some of electricaccelerator's capabilities, download electric cloud's free sparkbuild tool.

There are at least four methods that can be used in different combinations to make the process of setting up a complete development environment a lot less painful.

When working in Eclipse, you’ll often end up with a number of projects in your workspace that constitute an application. You could have a multi-tiered system with a web, server and database project and other miscellaneous ones. Or if you’re an Eclipse RCP developer, you could end up with dozens of plugins each represented by a project. Although multiple projects give you modularity (which is good), they can make it difficult to manage the workspace (which is bad). Developers have to check out each project individually from different locations in the repository. Sometimes they even have to get projects from multiple repositories. This is a painstakingly long and error-prone task. But an easier way to manage multiple projects is with Eclipse’s Team Project Sets (TPS). Creating a workspace becomes as easy as importing an XML file and waiting for Eclipse to do its job. Yes, there are other more sophisticated tools out there that do this and more (eg. Maven and Buckminster) but team project sets are a good enough start if you haven’t got anything set up and may be good enough for the longer term as well, depending on how your team works. Create a Team Project Set to share with other developers It’s easy to create a team project set (TPS). The first thing is to start with a workspace that already has all the projects checked out. Then it’s as easy as choosing File > Export > Team > Team Project Set, selecting the projects you want to export and then entering a file name. Done. But it’s always better to see it in action. In the video, I export 3 projects that I’ve already checked out from Subversion into a TPS file. Notes: You can select which projects should go into the TPS. This way you can exclude irrelevant or personal projects you’ve got in your workspace. Eclipse adds the extension .psf if you don’t provide one. The exported file is an XML file, with the default extension of psf, so in the video the file would be music.psf. There is a project entry for each project you exported that includes the project’s name and its repository location, separated by commas. Once created, the file is easy to edit so go ahead and make your own changes if you want to. Here is an example of what it looks like: svn/repo/music-application/trunk,music-application"/> svn/repo/music-db/trunk,music-db"/> svn/repo/music-web/trunk,music-web"/> Import the Team Project Set to checkout multiple projects into your workspace Now for the fun part. To import a team project set (TPS), start with any workspace (normally an empty one) and choose File > Import > Team > Team Project Set. Choose the TPS file that someone else kindly exported for you and then wait for Eclipse to do its magic. Notes: If you have an existing project in your workspace whose name matches a project in the TPS, Eclipse will prompt you whether you want to overwrite the project. I always choose No To All, since overwriting the project will mean you lose any changes you made to it. But if you have the urge to start from scratch then you can choose Yes. The import also creates a link to the repository in SVN Repositories, so you don’t have to do that. If one already exists, it will not duplicate it but reuse the existing connection. The process may take a while depending on the number of projects in the TPS and the speed of your repo checkouts. You can choose to run the import in the background (as I did in the video), giving you the opportunity to use Eclipse while the import happens. Otherwise, grab some coffee and wait for it to finish the checkouts. Gotcha: You may find that Eclipse 3.4 and lower may actually create a repository connection per project if the repository didn’t exist beforehand, which is not ideal. To solve this, create an initial repository root that’s shared by the projects and then do the import of the TPS. This problem has been fixed in 3.5 Managing the team project set and working with branches I’d recommend checking in the team project set into your repository and versioning/tagging it along with the rest of your code base. With each release you may be adding/removing projects and consequently updating the TPS, so it’s important that the TPS matches what the repo looks like at that point. As projects are added/removed with each release, you have 3 possibilities: Recreate the TPS from an existing workspace: Same as the steps above, but it means that whoever does the export needs to maintain an up to date workspace to reflect the current project structure. Modify an existing TPS with the new/deleted project: This entails adding/removing an entry from the PSF file. Not a lot of maintenance, but someone needs to remember to do this. Automatically create/update the TPS: You could write a script that somehow updates the TPS to reflect the new repo structure. For example, if you’re developing an Eclipse RCP application, the PDE Build provides a map file that could be used as input to create the PSF file. If you want to checkout a branch other than trunk, just open the PSF file and do a Find/Replace of trunk with your branch name. You could also introduce an automated process as part of your build/release scripts to update the TPS with the correct branch and check it back in automatically, but that’s really optional. From http://eclipseone.wordpress.com

when i use eclipse i try and use shortcuts all the time. they really make me work faster and give me time to focus on getting the code out rather than slowing down to invoke ide commands with the mouse. because people work differently and on different things, it’s important to manage keyboard shortcuts to suit the way you work. so it’s good that eclipse makes it really easy to change shortcuts and also to view shortcuts for the commands you use a lot. i’ll discuss how to change keyboard shortcuts, how to avoid conflicts with existing ones, why it’s a good thing to manage shortcuts and then end off with some examples of common shortcuts that you should add to you arsenal. how do you manage keyboard shortcuts the main preference page can be found under window > preferences > general > keys (or faster: press ctrl+3 , type keys and press enter ). from here you can see all commands and assign/change their associated keyboard shortcuts. in the video, i’ll show you how to reassign a key. we’ll use this to assign ctrl+tab to switch to the next editor. notes: you don’t have to copy a command to assign/reassign a shortcut. i just prefer to keep the old shortcut in case someone else wants to take over my keyboard and expects the shortcut to work. all commands registered with eclipse are listed on the keys preference page. browse through them or search to see if your favourite command is listed. if it doesn’t have a shortcut assigned, then assign one immediately. the when dropdown on the dialog shows you in which context the command applies (eg. only when editing java source). you can assign the same shortcut to two different commands, but if the context differs eclipse will only execute the one command. i suggest you don’t change the context. notice that eclipse shows you which keys conflict with the selected one if their in the same context. but all the keys are already taken no, they’re not. firstly, if a key you like is already taken then be creative. use combos like ctrl+alt, alt+shift or even alt+shift+ctrl (easier to press then you think). these aren’t used as often as ctrl or ctrl+shift. you can sort by binding to see which keys are already used. secondly, eclipse allows you to assign a sequence of keystrokes to a command. eg. alt+shift+x, j (that’s used to run the current class as a java application) is invoked by pressing alt+shift+x, releasing the keys then pressing j. if you forgot your sequence shortcuts, just press the first part (eg. alt+shift+x), wait a second then eclipse helps you out by listing all commands that have this keystroke as the first part of the sequence. the list appears in the lower right corner of the window. this works for any commands assigned a sequence of keystrokes. here’s an example of what you might see when you press the first sequence of keystrokes (notice the list in the lower, right corner). tip: for custom commands you want to assign, use a well-known first keystroke to group your commands. for example, i use alt+shift+b (b for byron) as my grouping prefix. this way there are fewer conflicts with existing shortcuts and eclipse can show me a quick list if i forgot which keys i used. so why bother managing keyboard shortcuts managing keyboard shortcuts in eclipse is important because: not all eclipse commands have assigned shortcuts. a command you frequently use could be assigned a shortcut. eg. an svn commit is registered as an eclipse command but doesn’t have a keyboard shortcut assigned. assigning one yourself will speed up checking in changes. sometime eclipse gets it wrong. a good example is ctrl+f6 for switching editors – ctrl+tab is a much more sensible option since the keys are close together and doable with one hand. going through the list of shortcuts may give you ideas for working faster or even show you a command you didn’t know eclipse could do. but don’t shortcuts take a long time to learn? no ways! i often hear people complain that it takes too long to learn the shortcuts. i assure you that the 5 minutes it takes to learn the shortcut saves you hours, even days, of work over the months and years that you’ll be working on eclipse. here are some tips to get into and improve your keyboard usage: start by learning the shortcuts for the things you do often. are you using the mouse a lot to launch applications or select code? well, there’s a shortcut to launch apps and one to select code faster. keyboard shortcuts are often indicated next to menu items. note them and try to use them instead of reaching for the mouse. learn to punish yourself when you reach for the mouse by undoing your action and forcing yourself to use the keyboard. this seems counterproductive (and harsh) at first, but it forces your brain to rewire itself so you’ll favour the shortcuts instead of the mouse the next time. there is an eclipse plugin called mousefeed that shows you a keyboard alternative to a mouse click you performed. you can also configure it to cancel mouse clicks where a keyboard alternative is available, forcing you to use the keyboard in those instances. i don’t use it personally but what i’ve seen looks good. it’s definitely sounds like a good idea if you want to change your mousey ways and it relates nicely to my previous point. also keep this in mind: one of the easiest, surefire ways to work faster is to reduce the number of times you move your hands between the keyboard and mouse. the key is doing as much as possible with either one. for the mouse there are things like mouse gestures (if you’re on windows, try strokeit ). for the keyboard there are keyboard shortcuts and eclipse has hundreds of them ready to make your life easier (also see the excellent autohotkey for other ways to boost your keyboard usage). examples of useful keyboard shortcuts there are way too many shortcuts to list and you’ll come across the more useful ones in other tips . here are some you should get acquainted with at first and try to use all the time. shortcut action ctrl+1 quick fix list (for resolving errors/warnings) and also refactoring ctrl+space display the autocomplete list to select a relevant method/template, etc. ctrl+3 open quick access which allows you to run commands and navigate views and dialogs by searching for them, similar to launchy on windows or quicksilver on mac. ctrl+shift+r open any resource in the workspace, eg. xml file, class file, etc. ctrl+shift+t open a java type, eg. a class or interface. f3 go to the declaration of the method/class/variable f11/ctrl+f11 debug/run the last launched application (see this tip for more information) ctrl+alt+h display all methods that call a method (call hierarchy) f2 show javadoc for the current element (shift+f2 shows external javadoc) alt+up/down, alt+shift+down, ctrl+d move a line up/down, copy a line, delete a line (see this tip for more information) ctrl+/ comment/uncomment the current line or selected lines. you can be anywhere in the line, not necessarily at the beginning. you can press ctrl+shift+l to get a list of registered keyboard shortcuts in the lower right corner. but for a complete list, i prefer to go to the preference dialog as i can see all commands that are registered, even if they don’t have shortcuts registered from http://eclipseone.wordpress.com

When contemplating how machine-dependent applications might communicate with Java/JavaFX, JNI or the Java Native Interface, having been created for just such a task, would likely be the first mechanism that comes to mind. Although JNI works just fine thank you, a group of us ultimately decided against using it for a small project because, among others: Errors in your JNI implementation can corrupt the Java Virtual Machine in very strange ways, leading to difficult diagnosis. JNI can be time consuming and tedious, especially if there's a varied amount of interchange between the Native and Java platforms. For each OS/Platform supported, a separate JNI implementation would need to be created and maintained. Instead we opted for something a bit more mundane, namely sockets. The socket programming paradigm has been around a long time, is well understood and spans a multitude of hardware/software platforms. Rather than spending time defining JNI interfaces, just open up a socket between applications and send messages back and forth, defining your own message protocol. Following are some reflections on using sockets with JavaFX and Java. For the sake of simplicity, we'll skip the native stuff and focus on how sockets can be incorporated into a JavaFX application in a thread safe manner. Sockets and Threading Socket programming, especially in Java, lends itself to utilizing threads. Because a socket read() will block waiting for input, a common practice is to place the read loop in a background thread enabling you to continue processing while waiting for input at the same time. And if you're doing this work entirely in Java, you'll find that both ends of the socket connection -- the "server" side and the "client" side -- share a great deal of common code. Recognizing this, an abstract class called GenericSocket.java was created which is responsible for housing the common functionality shared by "server" and "client" sockets including the setup of a reader thread to handle socket reads asynchronously. For this simple example, two implementations of the abstract GenericSocket class, one called SocketServer.java, the other called SocketClient.java have been supplied. The primary difference between these two classes lies in the type of socket they use. SocketServer.java uses java.net.ServerSocket, while SocketClient.java uses java.net.Socket. The respective implementations contain the details required to set up and tear down these slightly different socket types. Dissecting the Java Socket Framework If you want to utilize the provided Java socket framework with JavaFX, you need to understand this very important fact: JavaFX is not thread safe and all JavaFX manipulation should be run on the JavaFX processing thread.1 If you allow a JavaFX application to interact with a thread other than the main processing thread, unpredictable errors will occur. Recall that the GenericSocket class created a reader thread to handle socket reads. In order to avoid non-main-thread-processing and its pitfalls with our socket classes, a few modifications must take place. [1] Stolen from JavaFX: Developing Rich Internet Applications - Thanks Jim Clarke Step 1: Identify Resources Off the Main Thread The first step to operating in a thread safe manner is to identify those resources in your Java code, residing off the main thread, that might need to be accessed by JavaFX. For our example, we define two abstract methods, the first, onMessage(), is called whenever a line of text is read from the socket. The GenericSocket.java code will make a call to this method upon encountering socket input. Let's take a look at the SocketReaderThread code inside GenericSocket, to get a feel for what's going on. class SocketReaderThread extends Thread { @Override public void run() { String line; waitForReady(); /* * Read from from input stream one line at a time */ try { if (input != null) { while ((line = input.readLine()) != null) { if (debugFlagIsSet(DEBUG_IO)) { System.out.println("recv> " + line); } /* * The onMessage() method has to be implemented by * a sublclass. If used in conjunction with JavaFX, * use Entry.deferAction() to force this method to run * on the main thread. */ onMessage(line); } } } catch (Exception e) { if (debugFlagIsSet(DEBUG_EXCEPTIONS)) { e.printStackTrace(); } } finally { notifyTerminate(); } } Because onMessage() is called off the main thread and inside SocketReaderThread, the comment states that some additional work, which we'll explain soon, must take place to assure main thread processing. Our second method, onClosedStatus(), is called whenever the status of the socket changes (either opened or closed for whatever reason). This abstract routine is called in different places within GenericSocket.java -- sometimes on the main thread, sometimes not. To assure thread safety, we'll employ the same technique as with onMessage(). Step 2: Create a Java Interface with your Identified Methods Once identified, these method signatures have to be declared inside a Java interface. For example, our socket framework includes a SocketListener.java interface file which looks like this: package genericsocket; public interface SocketListener { public void onMessage(String line); public void onClosedStatus(Boolean isClosed); } Step 3: Create Your Java Class, Implementing Your Defined Interface With our SocketListener interface defined, let's take a step-by-step look at how the SocketServer class is implemented inside SocketServer.java. One of the first requirements is to import a special Java class which will allow us to do main thread processing, achieved as follows: import com.sun.javafx.runtime.Entry; Next, comes the declaration of SocketServer. Notice that in addition to extending the abstract GenericSocket class it also must implement our SocketListener interface too: public class SocketServer extends GenericSocket implements SocketListener { Inside the SocketServer definition, a variable called fxListener of type SocketListener is declared: private SocketListener fxListener; The constructor for SocketServer must include a reference to fxListener. The other arguments are used to specify a port number and some debug flags. public SocketServer(SocketListener fxListener, int port, int debugFlags) { super(port, debugFlags); this.fxListener = fxListener; } Next, let's examine the implementation of the two methods which are declared in the SocketListener interface. The first, onMessage(), looks like this: /** * Called whenever a message is read from the socket. In * JavaFX, this method must be run on the main thread and * is accomplished by the Entry.deferAction() call. Failure to do so * *will* result in strange errors and exceptions. * @param line Line of text read from the socket. */ @Override public void onMessage(final String line) { Entry.deferAction(new Runnable() { @Override public void run() { fxListener.onMessage(line); } }); } As the comment points out, the Entry.deferAction() call enables fxListener.onMessage() to be executed on the main thread. It takes as an argument an instance of the Runnable class and, within its run() method, makes a call to fxListener.onMessage(). Another important point to notice is that onMessage()'s String argument must be declared as final. Along the same line, the onClosedStatus() method is implemented as follows: /** * Called whenever the open/closed status of the Socket * changes. In JavaFX, this method must be run on the main thread and * is accomplished by the Entry.deferAction() call. Failure to do so * will* result in strange errors and exceptions. * @param isClosed true if the socket is closed */ @Override public void onClosedStatus(final Boolean isClosed) { Entry.deferAction(new Runnable() { @Override public void run() { fxListener.onClosedStatus(isClosed); } }); } Another Runnable is scheduled via Entry.deferAction() to run fxlistener.onClosedStatus() on the main thread. Again, onClosedStatus()'s Boolean argument must also be defined as final. Accessing the Framework within JavaFX With this work behind us, now we can integrate the framework into JavaFX. But before elaborating on the details, lets show screenshots of two simple JavaFX applications, SocketServer and SocketClient which, when run together, can send and receive text messages to one another over a socket. These JavaFX programs were developed in NetBeans and utilize the recently announced NetBeans JavaFX Composer tool. You can click on the images to execute these programs via Java WebStart. Note: depending upon your platform, your system may ask for permission prior to allowing these applications to network. Source for the JavaFX applications and the socket framework in the form of NetBeans projects can be downloaded here. Step 4: Integrating into JavaFX To access the socket framework within JavaFX, you must implement the SocketListener class that was created for this project. To give you a feel for how this is done with our JavaFX SocketServer application, here are some code excerpts from the project's Main.fx file, in particular the definition of our ServerSocketListener class: public class ServerSocketListener extends SocketListener { public override function onMessage(line: String) { insert line into recvListView.items; } public override function onClosedStatus(isClosed : java.lang.Boolean) { socketClosed = isClosed; tryingToConnect = false; if (autoConnectCheckbox.selected) { connectButtonAction(); } } } Sparing all of the gory details, the onMessage() method will place the line of text read from the socket in to a JavaFX ListView control which is displayed in the program user interface. The onClosedStatus() method primarily updates the local socketClosed variable and attempts to reconnect the socket if the autoconnect option has been selected. To demonstrate how the socket is created, we examine the connectButtonAction() function: var socketServer : SocketServer; ... public function connectButtonAction (): Void { if (not tryingToConnect) { if (socketClosed) { socketServer = new SocketServer(ServerSocketListener{}, java.lang.Integer.parseInt(portTextbox.text), javafx.util.Bits.bitOr(GenericSocket.DEBUG_STATUS, GenericSocket.DEBUG_IO)); tryingToConnect = true; socketServer.connect(); } } } Whenever the user clicks on the "Connect" button, the connectButtonAction() function will be called. On invocation, if the socket isn't already open, it will create a new SocketServer instance. Recognize also that the SocketServer constructor includes an instance of the ServerSocketListener class which was defined above. To round this out, when the user clicks on the "Disconnect" button, the disconnectButtonAction() function is called. When invoked, it tears down the SocketServer instance. function disconnectButtonAction (): Void { tryingToConnect = false; socketServer.shutdown(); } Conclusion Admittedly, there's a fair amount to digest here. Hopefully, by carefully reviewing the steps and looking at the complete code listing, this can serve as a template if you wish to accomplish something similar in JavaFX. From http://blogs.sun.com/jtc/

The emergence of version control systems makes both promiscuous and continuous integration merging techniques more attractive. Which is better?

In this article we’ll review how dynamic classloaders are used in real servers, containers and frameworks to reload Java classes and applications. We’ll also touch on how to get faster reloads and redeploys by using them in optimal ways. RJC101: Objects, Classes and ClassLoaders RJC201: How do ClassLoader leaks happen? RJC301: Classloaders in Web Development — Tomcat, GlassFish, OSGi, Tapestry 5 and so on RJC401: HotSwap and JRebel — what do they really do? RJC501: The impact of the redeploy phase on the development process AKA:Turnaround Java EE (web) applications In order for a Java EE web application to run, it has to be packaged into an archive with a .WAR extension and deployed to a servlet container like Tomcat. This makes sense in production, as it gives you a simple way to assemble and deploy the application, but when developing that application you usually just want to edit the application’s files and see the changes in the browser. A Java EE enterprise application has to be packaged into an archive with an .EAR extension and deployed to an application container. It can contain multiple web applications and EJB modules, so it often takes a while to assemble and deploy it. Recently, 1100+ EE developers told us how much time it takes them, and we compiled the results into the Redeploy and Restart Report. Spoiler: Avg redeploy & restart time is 2.5 minutes – which is higher than we expected. In Reloading Java Classes 101, we examined how dynamic classloaders can be used to reload Java classes and applications. In this article we will take a look at how servers and frameworks use dynamic classloaders to speed up the development cycle. We’ll use Apache Tomcat as the primary example and comment when behavior differs in other containers (Tomcat is also directly relevant for JBoss and GlassFish as these containers embed Tomcat as the servlet container). Redeployment To make use of dynamic classloaders we must first create them. When deploying your application, the server will create one classloader for each application (and each application module in the case of an enterprise application). The classloaders form a hierarchy as illustrated: In Tomcat each .WAR application is managed by an instance of the StandardContext class that creates an instance of WebappClassLoader used to load the web application classes. When a user presses “reload” in the Tomcat Manager the following will happen: StandardContext.reload() method is called The previous WebappClassLoader instance is replaced with a new one All reference to servlets are dropped New servlets are created Servlet.init() is called on them Calling Servlet.init() recreates the “initialized” application state with the updated classes loaded using the new classloader instance. The main problem with this approach is that to recreate the “initialized” state we run the initialization from scratch, which usually includes loading and processing metadata/configuration, warming up caches, running all kinds of checks and so on. In a sufficiently large application this can take many minutes, but in a in small application this often takes just a few seconds and is fast enough to seem instant, as commonly demonstrated in the Glassfish v3 promotional demos. If your application is deployed as an .EAR archive, many servers allow you to also redeploy each application module separately, when it is updated. This saves you the time you would otherwise spend waiting for non-updated modules to reinitialize after the redeployment. Hot Deployment Web containers commonly have a special directory (e.g. “webapps” in Tomcat, “deploy” in JBoss) that is periodically scanned for new web applications or changes to the existing ones. When the scanner detects that a deployed .WAR is updated, the scanner causes a redeploy to happen (in Tomcat it calls the StandardContext.reload() method). Since this happens without any additional action on the user’s side it is commonly referred to “Hot Deployment”. Hot Deployment is supported by all wide-spread application servers under different names: autodeployment, rapid deployment, autopublishing, hot reload, and so on. In some containers, instead of moving the archive to a predefined directory you can configure the server to monitor the archive at a specific path. Often the redeployment can be triggered from the IDE (e.g. when the user saves a file) thus reloading the application without any additional user involvement. Although the application is reloaded transparently to the user, it still takes the same amount of time as when hitting the “Reload” button in the admin console, so code changes are not immediately visible in the browser, for example. Another problem with redeployment in general and hot deployment in particular is classloader leaks. As we reviewed in Reloading Java Classes 201, it is amazingly easy to leak a classloader and quickly run out of heap causing an OutOfMemoryError. As each deployment creates new classloaders, it is common to run out of memory in just a few redeploys on a large enough application (whether in development or in production). Exploded Deployment An additional feature supported by the majority of web containers is the so called “exploded deployment”, also known as “unpackaged” or “directory” deployment. Instead of deploying a .WAR archive, one can deploy a directory with exactly the same layout as the .WAR archive: Why bother? Well, packaging an archive is an expensive operation, so deploying the directory can save quite a bit of time during build. Moreover, it is often possible to set up the project directory with exactly the same layout as the .WAR archive. This means an added benefit of editing files in place, instead of copying them to the server. Unfortunately, as Java classes cannot be reloaded without a redeploy, changing a .java file still means waiting for the application to reinitialize. With some servers it makes sense to find out exactly what triggers the hot redeploy in the exploded directory. Sometimes the redeploy will be triggered only when the “web.xml” timestamp changes, or as in the case of GlassFish only when a special ”.reload” file timestamp changes. In most servers any change to deployment descriptors or compiled classes will cause a hot redeploy. If your server only supports deploying by copying to a special directory (e.g. Tomcat “webapps”, JBoss “deploy” directories) you can skip the copying by creating a symlink from that special directory to your project workspace. On Linux and Mac OS X you can use the common “ln -s” command to do that, whereas on Windows you should download the Sysinternals “junction” utility. If you use Maven, then it’s quite complicated to set up exploded development from your workspace. If you have a solo web application you can use the Maven Jetty plugin, which uses classes and resources directly from Maven source and target project directories. Unfortunately, the Maven Jetty plugin does not support deploying multiple web applications, EJB modules or EARs so in the latter case you’re stuck doing artifact builds. Session Persistence Since we’re on the topic of reloading classes, and redeploying involves reinitializing an application, it makes sense to talk about session state. An HTTP session usually holds information like login credentials and conversational state. Losing that session when developing a web application means spending time logging in and browsing to the changes page – something that most web containers have tried to solve by serializing all of the objects in the HttpSession map and then deserializing them in the new classloader. Essentially, they copy all of the session state. This requires that all session attributes implement Serializable (ensuring session attributes can be written to a database or a file for later use), which is not restricting in most cases. Session persistence has been present in most major containers for many years (e.g. Restart Persistence in Tomcat), but was notoriously absent in Glassfish before v3. OSGi There is a lot of misunderstanding surrounding what exactly OSGi does and doesn’t do. If we ignore the aspects irrelevant to the current issue, OSGi is basically a collection of modules each wrapped in its own classloader, which can be dropped and recreated at will. When it’s recreated, the modules are reinitialized exactly the same way a web application is. The difference between OSGi and a web container is that OSGi is something that is exposed to your application, that you use to split your application into arbitrarily small modules. Therefore, by design, these modules will likely be much smaller than the monolithic web applications we are used to building. And since each of these modules is smaller and we can “redeploy” them one-by-one, re-initialization takes less time. The time depends on how you design your application (and can still be significant). Tapestry 5, RIFE & Grails Recently, some web frameworks, such as Tapestry 5, RIFE and Grails, have taken a different approach, taking advantage of the fact that they already need to maintain application state. They’ll ensure that state will be serializable, or otherwise easily re-creatable, so that after dropping a classloader, there is no need to reinitialize anything. This means that application developers use frameworks’ components and the lifecycle of those components is handled by the framework. The framework will initialize (based on some configuration, either xml or annotation based), run and destroy the components. As the lifecycle of the components is managed by the framework, it is easy to recreate a component in a new classloader without user intervention and thus create the effect of reloading code. In the background, the old component is destroyed (classloader is dropped) and a new one created (in a new classloader where the classes are read in again) and the old state is either deserialized or created based on the configuration. This has the obvious advantage of being very quick, as components are small and the classloaders are granular. Therefore the code is reloaded instantly, giving a smooth experience in developing the application. However such an approach is not always possible as it requires the component to be completely managed by the framework. It also leads to incompatibilities between the different class versions causing, among others, ClassCastExceptions. We’ve Covered a Lot – and simplified along the way It’s worth mentioning that using classloaders for code reloading really isn’t as smooth as we have described here – this is an introductory article series. Especially with the more granular approaches (such as frameworks that have per component classloaders, manual classloader dropping and recreating, etc), when you start getting a mixture of older and newer classes all hell can break loose. You can hold all kinds of references to old objects and classes, which will conflict with the newly loaded ones (a common problem is getting a ClassCastException), so watch what you’re doing along the way. As a side note: Groovy is actually somewhat better at handling this, as all calls through the Meta-Object Protocol are not subject to such problems. This article addressed the following questions: How are dynamic classloaders used to reload Java classes and applications? How do Tomcat, GlassFish (incl v3), and other servers reload Java classes and applications? How does OSGi improve reload and redeploy times? How do frameworks (incl Tapestry 5, RIFE, Grails) reload Java classes and applications? Coming up next, we continue our explanation of classloaders and the redeploy process with an investigation into HotSwap and JRebel, two tools used to reduce time spent reloading and redeploying. Stay tuned! From http://www.zeroturnaround.com/blog/

Welcome to the Part 2 of 7-part series where we will explore the world of Struts 2 Framework. In we went through the basics of Struts2, its Architecture diagram, the request processing lifecycle and a brief comparison of Struts1 and Struts2. If you have not gone through the previous article, I highly recommend you to do that before starting hands-on today. Struts 2 Tutorial List Part 7: Struts 2 Ajax Tutorial with Example Related: Create Struts Application with Eclipse Things We Need Before we starts with our first Hello World Struts 2 Example, we will need few tools. JDK 1.5 above (download) Tomcat 5.x above or any other container (Glassfish, JBoss, Websphere, Weblogic etc) (download) Eclipse 3.2.x above (download) Apache Struts2 JAR files:(download). Following are the list of JAR files required for this application. commons-logging-1.0.4.jar freemarker-2.3.8.jar ognl-2.6.11.jar struts2-core-2.0.12.jar xwork-2.0.6.jar Note that depending on the current version of Struts2, the version number of above jar files may change. Our Goal Our goal is to create a basic Struts2 application with a Login page. User will enter login credential and if authenticated successfully she will be redirected to a Welcome page which will display message ”Howdy, …!“. If user is not authenticated, she will be redirected back to the login page. Getting Started Let us start with our first Struts2 based application. Open Eclipse and goto File -> New -> Project and select Dynamic Web Project in the New Project wizard screen. After selecting Dynamic Web Project, press Next. Write the name of the project. For example StrutsHelloWorld. Once this is done, select the target runtime environment (e.g. Apache Tomcat v6.0). This is to run the project inside Eclipse environment. After this press Finish. Once the project is created, you can see its structure in Project Explorer. Now copy all the required JAR files in WebContent -> WEB-INF -> lib folder. Create this folder if it does not exists. Mapping Struts2 in WEB.xml As discussed in the previous article (Introduction to Struts2), the entry point of Struts2 application will be the Filter define in deployment descriptor (web.xml). Hence we will define an entry of org.apache.struts2.dispatcher.FilterDispatcher class in web.xml. Open web.xml file which is under WEB-INF folder and copy paste following code. Struts2 Applicationstruts2org.apache.struts2.dispatcher.FilterDispatcherstruts2/*Login.jsp The above code in web.xml will map Struts2 filter with url /*. The default url mapping for struts2 application will be /*.action. Also note that we have define Login.jsp as welcome file. The Action Class We will need an Action class that will authenticate our user and holds the value for username and password. For this we will create a package net.viralpatel.struts2 in the source folder. This package will contain the action file. Create a class called LoginAction in net.viralpatel.struts2 package with following content. package net.viralpatel.struts2;public class LoginAction {private String username;private String password;public String execute() {if (this.username.equals("admin")&& this.password.equals("admin123")) {return "success";} else {return "error";}public String getUsername() {return username;}public void setUsername(String username) {this.username = username;}public String getPassword() {return password;}public void setPassword(String password) {this.password = password;} Note that, above action class contains two fields, username and password which will hold the values from form and also contains an execute() method that will authenticate the user. In this simple example, we are checking if username is admin and password is admin123. Also note that unlike Action class in Struts1, Struts2 action class is a simple POJO class with required attributes and method. The execute() method returns a String value which will determine the result page. Also, in Struts2 the name of the method is not fixed. In this example we have define method execute(). You may want to define a method authenticate() instead. The ResourceBundle ResourceBundle is very useful Java entity that helps in putting the static content away from the source file. Most of the application define a resource bundle file such as ApplicationResources.properties file which contains static messages such as Username or Password and include this with the application. ResourceBundle comes handy when we want to add Internationalization (I18N) support to an application. We will define an ApplicationResources.properties file for our application. This property file should be present in WEB-INF/classes folders when the source is compiled. Thus we will create a source folder called resources and put the ApplicationResources.properties file in it. To create a source folder, right click on your project in Project Explorer and select New -> Source Folder. Specify folder name resources and press Finish. Create a file ApplicationResources.properties under resources folder. Copy following content in ApplicationResources.properties. label.username= Usernamelabel.password= Passwordlabel.login= Login The JSP We will create two JSP files to render the output to user. Login.jsp will be the starting point of our application which will contain a simple login form with username and password. On successful authentication, user will be redirected to Welcome.jsp which will display a simple welcome message. Create two JSP files Login.jsp and Welcome.jsp in WebContent folder of your project. Copy following content into it. Login.jsp Struts 2 - Login Application Welcome.jsp Howdy, ...! Note that we have used struts2 tag to render the textboxes and labels. Struts2 comes with a powerful built-in tag library to render UI elements more efficiently. The struts.xml file Struts2 reads the configuration and class definition from an xml file called struts.xml. This file is loaded from the classpath of the project. We will define struts.xml file in the resources folder. Create file struts.xml in resources folder. Copy following content into struts.xml. Welcome.jspLogin.jsp Note that in above configuration file, we have defined Login action of our application. Two result paths are mapped with LoginAction depending on the outcome of execute() method. If execute() method returns success, user will be redirected to Welcome.jsp else to Login.jsp. Also note that a constant is specified with name struts.custom.i18n.resources. This constant specify the resource bundle file that we created in above steps. We just have to specify name of resource bundle file without extension (ApplicationResources without .properties). Our LoginAction contains the method execute() which is the default method getting called by Sturts2. If the name of method is different, e.g. authenticate(); then we should specify the method name in tag. Almost Done We are almost done with the application. You may want to run the application now and see the result yourself. I assume you have already configured Tomcat in eclipse. All you need to do: Open Server view from Windows -> Show View -> Server. Right click in this view and select New -> Server and add your server details. To run the project, right click on Project name from Project Explorer and select Run as -> Run on Server (Shortcut: Alt+Shift+X, R) But there is one small problem. Our application runs perfectly fine at this point. But when user enters wrong credential, she is redirected to Login page. But no error message is displayed. User does not know what just happened. A good application always show proper error messages to user. So we must display an error message Invalid Username/Password. Please try again when user authentication is failed. Final Touch To add this functionality first we will add the error message in our ResourceBundle file. Open ApplicationResources.properties and add an entry for error.login in it. The final ApplicationResources.properties will look like: label.username= Usernamelabel.password= Passwordlabel.login= Loginerror.login= Invalid Username/Password. Please try again. Also we need to add logic in LoginAction to add error message if user is not authenticated. But there is one problem. Our error message is specified in ApplicationResources.properties file. We must specify key error.login in LoginAction and the message should be displayed on JSP page. For this we must implement com.opensymphony.xwork2.TextProvider interface which provides method getText(). This method returns String value from resource bundle file. We just have to pass the key value as argument to getText() method. The TextProvider interface defines several method that we must implement in order to get hold on getText() method. But we don’t want to spoil our code by adding all those methods which we do not intend to use. There is a good way of dealing with this problem. Struts2 comes with a very useful class com.opensymphony.xwork2.ActionSupport. We just have to extend our LoginAction class with this class and directly use methods such as getText(), addActionErrors() etc. Thus we will extend the LoginAction class with ActionSupport class and add the logic for error reporting into it. The final code in LoginAction must look like: package net.viralpatel.struts2;import com.opensymphony.xwork2.ActionSupport;public class LoginAction extends ActionSupport {private String username;private String password;public String execute() {if (this.username.equals("admin")&& this.password.equals("admin123")) {return "success";} else {addActionError(getText("error.login"));return "error";}public String getUsername() {return username;}public void setUsername(String username) {this.username = username;}public String getPassword() {return password;}public void setPassword(String password) {this.password = password;} And that’s it. Our first Hello World Struts2 Application is now ready. That’s All Folks Execute the application in Eclipse and run it in your favorite browser. Login page Welcome page Login page with error Download Source Code Click here to download Source Code without JAR files (9KB). Moving On Now that we have created our first webapp using Struts2 framework, we know how the request flows in Struts2. We also know the use of struts.xml and properties file. In this application we implemented a preliminary form of validation. In we will learn more about Validation Framework in Struts2 and implement it in our example. Original article: http://viralpatel.net/blogs/2009/12/tutorial-create-struts-2-application-eclipse-example.html

What can you do with a Groovy AST Transformation? A difficult question, considering the answer is "almost anything".

Learn the basics of Java Content Repositories, including how they work, and how they're used.

Spring Integration and Apache Camel are open source frameworks providing a simpler solution for the Integration problems in the enterprise, to quote from their respective websites: Apache Camel - Apache Camel is a powerful open source integration framework based on known Enterprise Integration Patterns with powerful Bean Integration. Spring Integration - It provides an extension of the Spring programming model to support the well-known Enterprise Integration Patterns while building on the Spring Framework's existing support for enterprise integration. Essentially Spring Integration and Apache Camel enable applications to integrate with other systems. This article seeks to provide an implementation for an integration problem using both Spring Integration and Apache Camel. The objective is to show how easy it is to use these frameworks for a fairly complicated integration problem and to recommend either of these great products for your next Integration challenge. Problem: To illustrate the use of these frameworks consider a simple integration scenario, described using EIP terminology: The application needs to get a "Report" by aggregating "Sections" from a Section XML over http service. Each request for Report consists of a set of request for sections – in this specific example there are requests for three sections, the header, body and footer. The XML over http service returns a Section for the Section Request. The responses need to be aggregated into a single report. A sample test for this scenario is of the following type: ReportGenerator reportGenerator = reportGeneratorFactory.createReportGenerator(); List sectionRequests = new ArrayList(); String entityId="A Company"; sectionRequests.add(new SectionRequest(entityId,"header")); sectionRequests.add(new SectionRequest(entityId,"body")); sectionRequests.add(new SectionRequest(entityId,"footer")); ReportRequest reportRequest = new ReportRequest(sectionRequests); Report report = reportGenerator.generateReport(reportRequest); List sectionOfReport = report.getSections(); System.out.println(report); assertEquals(3, sectionOfReport.size()); The “ReportGenerator” is the messaging gateway, hiding the details of the underlying messaging infrastructure and in this specific case also the integration API – Apache Camel or Spring Integration. To start with, let us implement a solution to this integration problem using Spring Integration as the Framework, followed by Apache Camel. The complete working code using Spring Integration and Apache Camel is also available with the article. Solution Using Spring Integration: The Gateway component is easily configured using the following entry in the Spring Configuration. Internally Spring Integration uses AOP to hook up a component which routes the requests from an internal input channel and waits for the response in the response channel. The component to Split the Input Report Request to Section Request is fairly straightforward: public class SectionRequestSplitter { public List split(ReportRequest reportRequest){ return reportRequest.getSectionRequests(); } } and to hook this splitter with Spring Integration: Next, to transform the Section Request to an XML format - The component is the following: public class SectionRequestToXMLTransformer { public String transform(SectionRequest sectionRequest){ //this needs to be optimized...purely for demonstration of the concept String sectionRequestAsString = "" + sectionRequest.getEntityId() + "" + sectionRequest.getSectionId() + ""; return sectionRequestAsString; } } and is hooked up in the Spring Integration configuration file in the following way: To send an XML over http request using the Section Request XML to a section Service: To transform the Section Response XML to a Section Object - The component is the following: public class SectionResponseXMLToSectionTransformer { public Section transform(String sectionXML) { SAXReader saxReader = new SAXReader(); Document document; String sectionName = ""; String entityId = ""; try { document = saxReader.read(new StringReader(sectionXML)); sectionName = document .selectSingleNode("/section/meta/sectionName").getText(); entityId = document.selectSingleNode("/section/meta/entityId") .getText(); } catch (DocumentException e) { e.printStackTrace(); } return new Section(entityId, sectionName, sectionXML); } } and is hooked up in the Spring Integration configuration file in the following way: To aggregate the Sections together into a report, the component is the following:: public class SectionResponseAggregator { public Report aggregate(List sections) { return new Report(sections); } } and is hooked up in the Spring Integration configuration file in the following way: This completes the Spring Integration implementation for this Integration Problem. The following is the complete Spring Integration configuration file: A working sample is provided with the article(Download, extract and run "mvn test") Solution using Apache Camel: Apache Camel allows the route to be defined using multiple DSL implementations – Java DSL, Scala DSL and an XML based DSL. The recommended approach is to use Spring CamelContext as a runtime and the Java DSL for route development. The following is to build the Spring Camel Context: The route is configured by the Java based DSL: public class CamelRouteBuilder extends RouteBuilder { private String serviceURL; @Override public void configure() throws Exception { from("direct:start") .split().method("sectionRequestSplitterBean", "split") .aggregationStrategy(new ReportAggregationStrategy()) .transform().method("sectionRequestToXMLBean", "transform") .to(serviceURL) .transform().method("sectionResponseXMLToSectionBean", "transform"); } public void setServiceURL(String serviceURL) { this.serviceURL = serviceURL; } } Apache Camel does not provide an out of the box Message Gateway feature, however it is fairly easy to create a wrapper component that can hide the underlying details in the following way: Reader davsclaus has provided references to two mechanisms with Apache Camel to provide an out of the box Messaging Gateway - Messaging Gateway EIP and Camel Proxy which allows a POJO to be used as a Mesaging Gateway. Camel Proxy will be used with the article, and can be configured in the Camel Configuration files in the following way: Per davsclaus, there is a bug in Apache Camel(2.1 or older) when invoking a bean later in the route(the splitter bean), which is to be fixed in Apache Camel 2.2. To work around this bug, a convertBody step will be introduced in the route: from("direct:start") .convertBodyTo(ReportRequest.class) .split(bean("sectionRequestSplitterBean", "split"), new ReportAggregationStrategy()) .transform().method("sectionRequestToXMLBean", "transform") .to(serviceURL) .transform().method("sectionResponseXMLToSectionBean", "transform"); The component to Split the Input Report Request to Section Request is exactly same as Spring Integration component: public class SectionRequestSplitter { public List split(ReportRequest reportRequest){ return reportRequest.getSectionRequests(); } } To hook the component with Apache Camel: from("direct:start") .split().method("sectionRequestSplitterBean", "split") .... Next to transform the Section Request to an XML format, again this is exactly same as the implementation for Spring Integration, with hook being provided in the following manner: ...... .transform().method("sectionRequestToXMLBean", "transform") ...... To send an XML over http request using the Section Request XML to a section Service: ...... .transform().method("sectionRequestToXMLBean", "transform") .to(serviceURL) ......... To transform the Section Response XML to a Section object, the component is exactly same as the one used with Spring Integration, with the following highlighted hook in the Camel route: ...... .transform().method("sectionResponseXMLToSectionBean", "transform"); To aggregate the Section responses together into a report, the component is a bit more complicated than Spring Integration. Apache Camel supports a Scatter/Gather pattern using a route of the following type: ...... .split().method("sectionRequestSplitterBean", "split") .aggregationStrategy(new ReportAggregationStrategy()) with an aggregation strategy being passed on to the Splitter, the aggregation strategy implementation is the following: public class ReportAggregationStrategy implements AggregationStrategy { @Override public Exchange aggregate(Exchange oldExchange, Exchange newExchange) { if (oldExchange == null) { Section section = newExchange.getIn().getBody(Section.class); Report report = new Report(); report.addSection(section); newExchange.getIn().setBody(report); return newExchange; } Report report = oldExchange.getIn().getBody(Report.class); Section section = newExchange.getIn().getBody(Section.class); report.addSection(section); oldExchange.getIn().setBody(report); return oldExchange; } } This completes the Apache Camel based implementation. A working sample for Camel is provided with the article - just download, extract and run "mvn test". Conclusion: Spring Integration and Apache Camel provide a simple and clean approach for the Integration problems in a typical enterprise. They are lightweight frameworks – Spring Integration builds on top of Spring portfolio and extends the familiar programming model for the Integration domain and is easy to pick up, Apache camel provides a good Java based DSL and integrates well with Spring Core, with a fairly gentle learning curve. The article does not recommend one product over the other but encourages the reader to evaluate and learn from both these frameworks. References: Spring Integration Website: http://www.springsource.org/spring-integration Apache Camel Website: http://camel.apache.org/ Spring Integration Reference: http://static.springsource.org/spring-integration/reference/htmlsingle/spring-integration-reference.html Apache Camel User Guide: http://camel.apache.org/user-guide.html Plug for my blog: http://biju-allandsundry.blogspot.com/

Develop a web-based app based on technologies in the JEE6 specs such as Enterprise Java Beans 3.1 and JPA with the help of NetBeans IDE 6.8.