inversion of control is one of the most common and widely used techniques for handling class dependencies in software development and could easily be the most important practice in unit testing. basically, it determines if your code is unit-testable or not. not just that, but it can also help improve significantly your overall software structure and design. but what is it all about? it is really that important? hopefully we’ll clear those out on the following lines. identifying class dependencies as we mentioned before, inversion of control is a technique used to handle class dependencies effectively; but, what exactly is a dependency ? in real life, for instance, a car needs an engine in order to function; without it, it probably won’t work at all. in programming it is the same thing; when a class needs another one in order to function properly, it has a dependency on it. this is called a class dependency or coupling . let’s look at the following code example: public class usermanager { private md5passwordhasher passwordhasher; public usermanager() { this.passwordhasher = new md5passwordhasher(); } public void resetpassword(string username, string password) { // get the user from the database user user = datacontext.users.getbyname(username); string hashedpassword = this.passwordhasher.hash(password); // set the user new password user.password = hashedpassword; // save the user back to the database. datacontext.users.update(user); datacontext.commit(); } // more methods... } public class md5passwordhasher { public string hash(string plaintextpassword) { // hash password using an encryption algorithm... } } the previous code describes two classes, usermanager and passwordhasher . we can see how usermanager class initializes a new instance of the passwordhasher class on its constructor and keeps it as a class-level variable so all methods in the class can use it (line 3). the method we are going to focus on is the resetpassword method. as you might have already noticed, the line 15 is highlighted. this line makes use of the passwordhasher instance, hence, marking a strong class dependency between usermanager and passwordhasher . don’t call us, we’ll call you when a class creates instances of its dependencies, it knows what implementation of that dependency is using and probably how it works. the class is the one controlling its own behavior. by using inversion of control, anyone using that class can specify the concrete implementation of each of the dependencies used by it; this time the class user is the one partially controlling the class behavior (or how it behaves on the parts where it uses those provided dependencies). anyways, all of this is quite confusing. let’s look at an example: public class usermanager { private ipasswordhasher passwordhasher; public usermanager(ipasswordhasher passwordhasher) { this.passwordhasher = passwordhasher; } public void resetpassword(string username, string password) { // get the user from the database user user = datacontext.users.getbyname(username); string hashedpassword = this.passwordhasher.hash(password); // set the user new password user.password = hashedpassword; // save the user back to the database. datacontext.users.update(user); datacontext.commit(); } // more methods... } public interface ipasswordhasher { string hash(string plaintextpassword); } public class md5passwordhasher : ipasswordhasher { public string hash(string plaintextpassword) { // hash password using an encryption algorithm... } } inversion of control is usually implemented by applying a design pattern called the strategy pattern (as defined in the gang of four book). this pattern consists on abstracting concrete component and algorithm implementations from the rest of the classes by exposing only an interface they can use; thus making implementations interchangeable at runtime and encapsulate how these implementations work since any class using them should not care about how they work. so, in order to achieve this, we need to sort some things out: abstract an interface from the md5passwordhasher class, ipasswordhasher ; so anyone can write custom implementations of password hashers (line 28-31). mark the md5passwordhasher class as an implementation of the ipasswordhasher interface (line 33). change the type of the password hasher used by usermanager to ipasswordhasher (line 3). add a new constructor parameter of type ipasswordhasher interface (line 5), which is the instance the usermanager class will use to hash its passwords. this way we delegate the creation of dependencies to the user of the class and allows the user to provide any implementation it wants, allowing it to control how the password is going to be hashed. this is the very essence of inversion of control: minimize class coupling. the user of the usermanager class has now control over how passwords are hashed. password hashing control has been inverted from the class to the user. here is an example on how we can specify the only dependency of the usermanager class: ipasswordhasher md5passwordhasher = new md5passwordhasher(); usermanager usermanager = new usermanager(md5passwordhasher); usermanager.resetpassword("luis.aguilar", "12345"); so, why is this useful? well, we can go crazy and create our own hasher implementation to be used by the usermanager class: // plain text password hasher: public class plaintextpasswordhasher : ipasswordhasher { public string hash(string plaintextpassword) { // let's disable password hashing by returning // the plain text password. return plaintextpassword; } } // usage: ipasswordhasher plaintextpasswordhasher = new plaintextpasswordhasher(); usermanager usermanager = new usermanager(plaintextpasswordhasher); // resulting password will be: 12345. usermanager.resetpassword("luis.aguilar", "12345"); conclusion so, this concludes our article on inversion of control. hopefully with a little more practice, you will be able to start applying this to your code. of course, the biggest benefit of this technique is related to unit testing. so, what does it has to do with unit testing? well, we’re going to see this when we get into type mocking . so, stay tuned!

There are several good ways to upload content to an S3 bucket in the Java world – in this article we’ll look at what the jclouds library provides for this purpose. To use jclouds – specifically the APIs discussed in this article, this simple Maven dependency should be added to the pom of the project: org.jclouds jclouds-allblobstore 1.5.9 1. Uploading to Amazon S3 The first step, in order to access any of these APIs, is to create a BlobStoreContext: BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(BlobStoreContext.class); This represents the entry-point to a general key-value storage service, such as Amazon S3 – but not limited to it. For the more specific S3 only implementation, the context can be created similarly: BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(S3BlobStoreContext.class); And even more specifically: BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(AWSS3BlobStoreContext.class); When the authenticated context is no longer needed, closing it is required to release all resources – threads and connections – associated to it. 2. The four S3 APIs of jclouds The jclouds library provides four different APIs to upload content to S3 bucket, ranging from simple but inflexible to complex and powerful, all obtained via the BlobStoreContext. Let’s start with the simplest. 2.1. Upload via the Map API The easiest way jclouds can be used to interact with an S3 bucket is by representing that bucket as a Map. The API is obtained from the context: InputStreamMap bucket = context.createInputStreamMap("bucketName"); Then, to upload a simple HTML file: bucket.putString("index1.html", "hello world1"); The InputStreamMap API exposes several other types of PUT operations – files, raw bytes – both for single and bulk. A simple integration test can be used as an example: @Test public void whenFileIsUploadedToS3WithMapApi_thenNoExceptions() { BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(AWSS3BlobStoreContext.class); InputStreamMap bucket = context.createInputStreamMap("bucketName"); bucket.putString("index1.html", "hello world1"); context.close(); } 2.2. Upload via BlobMap Using the simple Map API is straightforward but ultimately limited – for example, there is no way to pass in metadata about the content being uploaded. When more flexibility and customization is necessary, this simplified approach to uploading data to S3 via a Map is no longer enough. The next API we’ll look at is the Blob Map API – this is obtained from the context: BlobMap bucket = context.createBlobMap("bucketName"); The API allows the client to access more lower level details, such as Content-Length, Content-Type, Content-Encoding, eTag hash and others; to upload new content in the bucket: Blob blob = bucket.blobBuilder().name("index2.html"). payload("hello world2"). contentType("text/html").calculateMD5().build(); The API also allows setting a variety of payloads on the create request. A simple integration test for uploading a basic HTML file to S3 via the Blob Map API: @Test public void whenFileIsUploadedToS3WithBlobMap_thenNoExceptions() throws IOException { BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(AWSS3BlobStoreContext.class); BlobMap bucket = context.createBlobMap("bucketName"); Blob blob = bucket.blobBuilder().name("index2.html"). payload("hello world2"). contentType("text/html").calculateMD5().build(); bucket.put(blob.getMetadata().getName(), blob); context.close(); } 2.3. Upload via BlobStore The previous APIs had no way to upload content using multipart upload – this makes them ill suited when working with large files. This limitation is addressed by the next API we’re going to look at – the synchronous BlobStore API. This is obtained from the context: BlobStore blobStore = context.getBlobStore(); To use the multipart support and upload a file to S3: Blob blob = blobStore.blobBuilder("index3.html"). payload("hello world3").contentType("text/html").build(); blobStore.putBlob("bucketName", blob, PutOptions.Builder.multipart()); The payload builder is the same one that was being used by the BlobMap API, so the same flexibility in specifying lower level metadata information about the blob is available here. The difference is the PutOptions supported by the PUT operation of the API – namely the multipart support. The previous integration test now has multipart enabled: @Test public void whenFileIsUploadedToS3WithBlobStore_thenNoExceptions() { BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(AWSS3BlobStoreContext.class); BlobStore blobStore = context.getBlobStore(); Blob blob = blobStore.blobBuilder("index3.html"). payload("hello world3").contentType("text/html").build(); blobStore.putBlob("bucketName", blob, PutOptions.Builder.multipart()); context.close(); } 2.4. Upload via AsyncBlobStore While the previous BlobStore API was synchronous, there is also an asynchronous API for BlobStore – AsyncBlobStore. The API is similarly obtained from the context: AsyncBlobStore blobStore = context.getAsyncBlobStore(); The only difference between the two is that the async API is returning ListenableFuture for the PUT asynchronous operation: Blob blob = blobStore.blobBuilder("index4.html"). .payload("hello world4").build(); blobStore.putBlob("bucketName", blob).get(); The integration test displaying this operation is similar to the synchronous one: @Test public void whenFileIsUploadedToS3WithBlobStore_thenNoExceptions() { BlobStoreContext context = ContextBuilder.newBuilder("aws-s3").credentials(identity, credentials) .buildView(AWSS3BlobStoreContext.class); BlobStore blobStore = context.getBlobStore(); Blob blob = blobStore.blobBuilder("index4.html"). payload("hello world4").contentType("text/html").build(); Future putOp = blobStore.putBlob("bucketName", blob, PutOptions.Builder.multipart()); putOp.get(); context.close(); } 3. Conclusion In this article, we analysed the four APIs that the jclouds library provides to upload content to Amazon S3. These four APIs are generic and they work with other key-value storage services as well – such as Microsoft Azure Storage for example. In the next article we’ll look at the Amazon specific S3 API available in jclouds – the AWSS3Client. We’ll implement the operation of uploading a large file, dynamically calculate the optimal number of parts for any given file, and perform the upload of all parts in parallel. P.S. You might dig following me on Twitter.

Since Grails 2.1 we can create a Grails wrapper. The wrapper allows developer to run Grails commands in a project without installing Grails first. The wrapper concept is also available in other projects from the Groovy ecosystem like Gradle or Griffon. A wrapper is a shell script for Windows, OSX or Linux named grailsw.bat or grailsw and a couple of JAR files to automatically download a specific version of Grails. We can check in the shell scripts and supporting files into a version control system and make it part of the project. Developers working on the project simply check out the code and execute the shell script. If there is no Grails installation available then it will be downloaded. To create the shell scripts and supporting files someone on the project must run the wrapper command for the first time. This developer must have a valid Grails installation. The files that are generated can then be added to version control and from then one developers can use the grailsw or grailsw.bat shell scripts. $ grails wrapper | Wrapper installed successfully $ In the root of the project we have two new files grailsw and grailsw.bat. Windows users can uss grailsw.bat and on other operating systems we use grailsw. Also a new directory wrapper is created with three files: grails-wrapper-runtime-2.2.0.jar grails-wrapper.properties springloaded-core-1.1.1.jar When we run the grailsw or grailsw.bat scripts for the first time we see how Grails is downloaded and installed into the $USER_HOME/.grails/wrapper directory. The following output shows that the file is downloaded and extracted when we didn't run the grailsw script before: $ ./grailsw --version Downloading http://dist.springframework.org.s3.amazonaws.com/release/GRAILS/grails-2.2.0.zip to /Users/mrhaki/.grails/wrapper/grails-2.2.0-download.zip ..................................................................................... ................................................................ Extracting /Users/mrhaki/.grails/wrapper/grails-2.2.0-download.zip to /Users/mrhaki/.grails/wrapper/2.2.0 Grails version: 2.2.0 When we want to use a new version of Grails one of the developers needs to run to run $ grails upgrade followed by $ grails wrapper with the new Grails version. Notice this developer needs to have a locally installed Grails installation of the version we want to create a wrapper for. The newly generated files can be checked in to version control and all developers on the project will have the new Grails version when they run the grails or grailsw.bat shell scripts. $ ./grailsw --version Downloading http://dist.springframework.org.s3.amazonaws.com/release/GRAILS/grails-2.2.1.zip to /Users/mrhaki/.grails/wrapper/grails-2.2.1-download.zip ..................................................................................... ... ................................................................ Extracting /Users/mrhaki/.grails/wrapper/grails-2.2.1-download.zip to /Users/mrhaki/.grails/wrapper/2.2.1 Grails version: 2.2.1 We can change the download location of Grails to for example a company intranet URL. In the wrapper/ directory we see the file grails-wrapper.properties. The file has one property wrapper.dist.url, which by default refers to http://dist.springframework.org.s3.amazonaws.com/release/GRAILS/. We can change this to another URL, add the change to version control so other developers will get the change automatically. And when the grailsw shell script is executed the download location will be another URL. To set a different download URL when generating the wrapper we can use the command-line option --distributionUrl: $ grails wrapper --distributionUrl=http://company.intranet/downloads/grails-releases/ If we don't like the default name for the directory to store the supporting files we can use the command-line option --wrapperDir. The files are then stored in the given directory and the grailsw and grailsw.bat shell scripts will contain the given directory name. Written with Grails 2.2.0 and 2.2.1

it happens to me many times: i’m stepping with the debugger through my code, and ups! i made one step too far! debugging, and made one step over too far what now? restart the whole debugging session? actually, there is a way to go ‘backwards’ gdb has a ‘reverse debugging’ feature, described here . i’m using the eclipse based codewarrior debugger, and this debug engine is not using gdb. the codewarrior debugger in mcu10.3 supports an eclipse feature: i select a code line in the editor view and use move to line : move to line what it does: it changes the current pc (program counter) of the program to that line: performed move to line now i can continue debugging from that line, e.g. stepping into that function call. yes, this is not true backward debugging. but it is simple and very effective. to perform true backward stepping, the debugger would need to reverse all operations, typically with a rather heavy state machine and data recording. but for the usual case where i simply need to go back a few lines, the ‘move to line’ is perfect. of course there are a few points to consider: this only changes the program counter. any variable changes/etc are not affected or reverted. in case of highly optimized code, there might be multiple sequence points per source line. so doing this for highly optimized code might not work correctly. it works ok within a function. it is not recommended to use it e.g. to set the pc outside of a function. because the context/stack frame is not set up. i use the ‘move to line’ frequently to ‘advance’ the program execution. e.g. to bypass some long sequences i’m not interested in, or to get out of an ‘endless’ loop. the same ‘move to line’ as available while doing assembly stepping too. see this post for details. happy line moving

ActiveMQ is one of the most popular messaging frameworks. For sure the most popular open source framework. Many people think that ActiveMQ works only with Java and this is not true at all. ActiveMQ can work with almost every popular language (including JavaScript!) through numerous protocols which it supports. Today I will show you how to use ActiveMQ in .NET-based solutions. Project setup Using VS 2010's Extension Manger I installed NuGet Package Manager. After installation and VS 2010 restart, I created a project called ActiveMQNMS. I right-clicked it and selected "Manage NuGet packages...". In the search field I typed: "ActiveMQ". There was a package called Apache.NMS.ActiveMQ. I installed it. (Note: ActiveMQ has one dependency - Apache.NMS package. The NMS package provides a unified API for working with different messaging frameworks and providers.) Starting ActiveMQ I already had ActiveMQ installed on my machine. If you don't have one, download it from http://activemq.apache.org. The default instance listens on 61616 port. However, mine is listening on 62626. If you want to run my code, please remember to change the port. To start ActiveMQ I executed: activemq-5.5.0\bin\activemq Depending on configured ports, you can use ActiveMQ web console to manage your queues, topics, subscribers, connections, embedded Apache Camel, etc. I'm using 8282 port, and the console URL is: http://localhost:8282/admin. Test stub In general the .NET API is almost a copy of the Java API. So if you're familiar with JMS and/or ActiveMQ you don't need any documentation. Please note TestIntialize and TestCleanup methods. using System; using Apache.NMS; using Apache.NMS.ActiveMQ; using Microsoft.VisualStudio.TestTools.UnitTesting; namespace ActiveMQNMS { [Serializable] public class Person { public string FirstName { get; set; } public string LastName { get; set; } } [TestClass] public class ActiveMqTest { private IConnection _connection; private ISession _session; private const String QUEUE_DESTINATION = "DotNet.ActiveMQ.Test.Queue"; [TestInitialize] public void TestInitialize() { IConnectionFactory factory = new ConnectionFactory("tcp://localhost:62626"); _connection = factory.CreateConnection(); _connection.Start(); _session = _connection.CreateSession(); } [TestCleanup] public void TestCleanup() { _session.Close(); _connection.Close(); } } } Writing Producer Here is the producer: [TestMethod] public void TestA() { IDestination dest = _session.GetQueue(QUEUE_DESTINATION); using (IMessageProducer producer = _session.CreateProducer(dest)) { var person = new Person { FirstName = "Łukasz", LastName = "Budnik" }; var objectMessage = producer.CreateObjectMessage(person); producer.Send(objectMessage); } } Run the test and refresh "Queues" list in ActiveMQ web console. You should see DotNet.ActiveMQ.Test.Queue queue with 1 enqueued and pending message. Purge the queue by hitting the purge link or you simply delete it. Writing Consumer Now we have to consume the message. Here is the code: [TestMethod] public void TestB() { Person person = null; IDestination dest = _session.GetQueue(QUEUE_DESTINATION); using (IMessageConsumer consumer = _session.CreateConsumer(dest)) { IMessage message; while ((message = consumer.Receive(TimeSpan.FromMilliseconds(2000))) != null) { var objectMessage = message as IObjectMessage; if (objectMessage != null) { person = objectMessage.Body as Person; if (person != null) { Assert.AreEqual("Łukasz", person.FirstName); Assert.AreEqual("Budnik", person.LastName); } } else { Assert.Fail("Object Message is null"); } } } if (person == null) { Assert.Fail("Person object is null"); } } Run tests. Refresh "Queues" tab in ActiveMQ web console. You should see 1 message enqueued and 1 message dequeued. As expected. Summary That's all. Simple, isn't it? ActiveMQ works very, very nicely with .NET. I have to find some performance comparison for ActiveMQ and MS or pure .C#/NET messaging frameworks. Or maybe you have it? Please share. cheers, Łukasz

SmartSVN is a powerful and easy-to-use graphical client for Apache Subversion. There are several clients for Subversion, but here are just a few reasons you should try SmartSVN: It’s cross-platform – SmartSVN runs on Windows, Linux and Mac OS X, so you can continue using the operating system (OS) that works the best for you. It can also be integrated into your OS, via Mac’s Finder Integration or Windows Shell. Everything you need, out of the box – SmartSVN comes complete with all the tools you need to manage your Subversion projects: Conflict solver – this feature combines the freedom of a general, three-way-merge with the ability to detect and resolve any conflicts that occur during the development lifecycle. File compare – this allows you to make inner-line comparisons and directly edit the compared files. Built-in SSH client – allows users to access servers using the SSH protocol. This security-conscious protocol encrypts every piece of communication between the client and the server, for additional protection. A complete view of your project at a glance – the most important files (such as conflicted, modified or missing files) are placed at the top of the file list. SmartSVN also highlights which directories contain local modifications, which directories have been changed in the repository, and whether individual files have been modified locally or in the central repo. This makes it easy to get a quick overview of the state of your project. Fully customizable – maximize productivity by fine-tuning your SmartSVN installation to suit your particular needs: Change keyboard shortcuts, write your own plugin with the SmartSVN API, group revisions to personalize your display, create Change Sets, and alter the context menus and toolbars to suit you. You can learn more about customizing SmartSVN at our ‘5 Ways to Customize SmartSVN’ blog post. Comprehensive bug tracker support – Trac and JIRA are both fully supported. Multitude of support options – SmartSVN users have access to a range of free support, from refcards to blogsand documentation, the SmartSVN forum and a Twitter account maintained by our open source experts. If you need extra support with your SmartSVN installation, expert email support is included with SmartSVN Professional licenses. Want to learn more about SmartSVN? On April 18th, WANdisco will be be holding a free ‘Introduction to SmartSVN’ webinar covering everything you need to get off to a great start with this popular client: Repository basics Checkouts, working folders, editing files and commits Reporting on changes Simple branching Simple merging This webinar is free so register now.

Recently I found myself sending more and more business metrics to Datadog, a Software as a Service solution that promises to collect all your data points and build business metrics, displaying them as graphs and triggering alerts whenever they get to critically low (or high) levels. The goals The more your automated tests raises their level of abstraction, the more they become oriented to external quality (what the customer wants and does) instead of internal quality (low coupling, high cohesion of the software design). The largest end-to-end tests that we have in place at Onebip connect several different projects on an integration server and run everything from the creation of a purchase or subscription to its renewal and termination (events that would happen months after creation). However, even end-to-end tests cannot guarantee that our applications work against external resources, such as merchants, mobile carrier, and ISPs. The only way to catch integration problems is monitoring. These problems, like a mobile carrier experiencing an outage, may be due to our errors or to external conditions; but they should nevertheless be discovered as early as possible. The infrastructure Datadog is the only data-collection service that passed the stress tests of SLL, our solution architect. It ships as an UDP server that you pay basing on the number of machines you want to run it on; for example, a preproduction and a production server are a common choice to start out. The server collects data locally and periodically uploads it to Datadog in bursts, where you can access it via a web application or via APIs in case you want to call it from your build. The UDP protocol is aligned with the goals of metric collections: a silent server that decouples the sending of metrics from the rest of the business logic: UDP packets are just lost if no process is there listening to them, no errors are raised if the server crashes or is not running or installed for some reason for instance in development machines). The monitoring code, which you write, should be decoupled and asynchronous as much as possible. The part that talks over the network is already externalized in the DataDog server, but you don't want the user to wait because you have to send some strange number. So the internal part (sending via UDP) is performed in Listener objects that implement the Observer pattern. These object still have to be wrapped in all-encompassing try/catch constructs so that any errors in the monitoring part never influence the business logic. Againg, you don't want a payment to fail because of an exception in how monitoring DateTime objects are built. For PHP we built a SilentListener class to wrap all of our object: class SilentListener { private $wrapped; public function __construct($wrapped) { $this->wrapped = $wrapped; } public function __call($method, $args) { try { call_user_func_array(array($this->wrapped, $method), $args); } catch (Exception $e) { $this->log($e); } } }SLL An example In some countries, we receive payments through mobile-originated messages (MO), a fancy word for saying SMS sent by the end user. So a simple way to monitor if we are receiving payment or if the server is exploded is to upload a metric counting them every time we receive one (pseudo-JSON format to show you the data): { counter: 1 } However, we can be more precise than this: an external outage or an integration problem may happen to a lower level than the whole application. For example, MOs can be delayed in Argentina, by a single carrier, while the rest of the world is still working fine. So our data points look like this: { counter: 1, tags: { country: "IT", carrier: "Vodafone", merchant: "Tasty Cookies, Inc.", } } and in turn graphs on DataDog or calls to its API can set up filters so that we can, if necessary, view only the data related to any combination of country, carrier and merchant. The nice thing, SLL says, is that you just start send data from production and only after you have data points available you build a graph or an alert system basing on what appears to be the most important tags. For example, a big merchant may benefit from some dedicated monitoring, while minor countries such as Vietnam should be monitored as a whole since their traffic is by far lower than that of the others.

I've put together a quick tutorial that gets a ViewPager up and running (with the Support Library), in just a few steps.

Originally authored by Jason Harwig The Square Engineering Blog has a great article on Smoother Signatures for Android, but I didn't find anything specifically about iOS. So, what is the best way to capture a users signature on an iOS device? Although I didn't find any articles on signature capture, there are good implementations on the App Store. My target user experience was the iPad application Paper by 53, a drawing application with beautiful and responsive brushes. All code is available in the Github repository: SignatureDemo. Connecting the Dots The simplest approach is to capture the touches and connect them with straight lines. In the initializer of a UIView subclass, create the path and gesture recognizer to capture touch events. // Create a path to connect lines path = [UIBezierPath bezierPath]; // Capture touches UIPanGestureRecognizer *pan = [[UIPanGestureRecognizer alloc] initWithTarget:self action:@selector(pan:)]; pan.maximumNumberOfTouches = pan.minimumNumberOfTouches = 1; [self addGestureRecognizer:pan]; Capture the pan events into a bézier path by connecting the points with lines. - (void)pan:(UIPanGestureRecognizer *)pan { CGPoint currentPoint = [pan locationInView:self]; if (pan.state == UIGestureRecognizerStateBegan) { [path moveToPoint:currentPoint]; } else if (pan.state == UIGestureRecognizerStateChanged) [path addLineToPoint:currentPoint]; [self setNeedsDisplay]; } Stroke the path - (void)drawRect:(CGRect)rect { [[UIColor blackColor] setStroke]; [path stroke]; } An example "J" character rendered using this technique reveals some issues. At slow velocities iOS captures enough touch resolution that the lines aren't noticeable, but faster movement shows large gaps between touches that accentuates the lines. The 2012 Apple Developer Conference included a session Building Advanced Gesture Recognizers that addresses this issue using math. Quadratic Bézier Curves Instead of connected lines between the touch points, quadratic bézier curves connect the points using the technique discussed in the aforementioned WWDC session (Seek to 42:15.) Connect the touch points with a quadratic curve using the touch points as the control points and the mid points as start and end. Adding quadratic curves to the previous code requires the storing the previous touch point, so add an instance variable for that. CGPoint previousPoint; Create a function to calculate the midpoint of two points. static CGPoint midpoint(CGPoint p0, CGPoint p1) { return (CGPoint) { (p0.x + p1.x) / 2.0, (p0.y + p1.y) / 2.0 }; } Update the pan gesture handler to add quadratic curves instead of straight lines - (void)pan:(UIPanGestureRecognizer *)pan { CGPoint currentPoint = [pan locationInView:self]; CGPoint midPoint = midpoint(previousPoint, currentPoint); if (pan.state == UIGestureRecognizerStateBegan) { [path moveToPoint:currentPoint]; } else if (pan.state == UIGestureRecognizerStateChanged) { [path addQuadCurveToPoint:midPoint controlPoint:previousPoint]; } previousPoint = currentPoint; [self setNeedsDisplay]; } Not much code and already we see a big difference. The touch points are no longer visible, but it looks a little bland when drawing a signature. Every curve is the same width, which doesn't match the physics of a real pen. Variable Stroke Width The width can be varied based on the touch velocity to create a more natural stroke. The UIPanGestureRecognizer already includes a method called velocityInView: that returns the current touch velocity as a CGPoint. To render a stroke of varying width, I switched to OpenGL ES and a technique called tesselation to convert the stroke into triangles – specifically, triangle strips (OpenGL has support for drawing lines, but iOS doesn't support variable line widths with smoothing.) The quadratic points along a curve also need to be calculated, but is beyond the scope of this article. Check the source on github for details. Given two points, a perpendicular vector is calculated and its magnitude set to half the current thickness. Given the nature of GL_TRIANGLE_STRIP only two points are needed to create the next rectangle segment with two triangles. Here is an example of the final output using quadratic bézier curves, and velocity based stroke thickness creating a visually appealing and natural signature.

Here are 10 articles from 10 different authors that provide valuable advice for Scrum teams. These articles are in no particular order, so feel free to skim down the list and start with the ones that are most relevant to you. 10 Tips for a Great Daily Scrum Meeting by Platinum Edge – The daily Scrum meeting is a powerful tool that keeps your project moving. At the same time, it is also easy for the meetings to not bring any added value. Tips for Effective Backlog Grooming by Charles Bradley – Are you wasting time in your Sprint Planning Meetings? Increase the value of your team’s Sprint Planning Meetings by grooming your Product Backlog. Yoda’s top 10 tips for a new Scrum Master by Nigel Steane – As a new Scrum Master, you face unfamiliar challenges and your success is very much based on your ability to utilise coaching and soft skills to gently guide your team and colleagues. Top ten tips for distributed Scrum team teleconferences By Jon Archer – After acting as a Scrum Master for several months on a distributed team with people in six different locations, three different countries, learn ten tips to help get past those inevitable awkward silences. 10 tips for adopting Scrum to save your project by Matthew Hodgson – Are you interested in adopting Scrum for your next project? Here are 10 tips from his experience with moving a number of projects from their existing project management frameworks to Scrum. Five Tips for Impediment Resolution with Scrum by Stefan Roock – Impediments can slow down or even halt the progress of an otherwise well-functioning Scrum team. Take a look at the most common challenges that crop up on teams and what steps you can take to resolve them. 10 Tips for Succeeding with Enterprise Agile Development by Tools Journal – Many enterprises are experimenting with agile development approaches like Scrum, Kanban, Lean, and XP hoping that introducing a new development approach will help. Yet, agile development has struggled to achieve critical mass in large enterprises. 6 Tips for Good Scrum by Martin Harris – If you are doing these 6 tips, then you are doing very well and are likely to get better over time. 9 Tips for Creating a Good Sprint Backlog by Luciano Felix – Giving attention to the sprint backlog creation process is fundamental to the team’s understanding of what should be done and how to better plan during the sprint. 7 Tips for a More Effective Daily Scrum by Richard Lawrence – The main purpose of the Daily Scrum is for team members to make and follow-up on commitments to one another that work towards the team’s shared sprint commitment. Here are seven ways to get your Daily Scrum back on focus If your it has become unfocused, too long, or otherwise ineffective. If you have any other good articles related to agile, please share them in the comments. Thanks.

We are going to construct an Apache SolrCloud (4.1) with 12 node EC2 instance(s) inside Amazon VPC in this post. Since the search data stored inside the SolrCloud is critical, we are going to build High availability at Solr Node level as well as AZ level. This setup will be done inside private subnet of Amazon VPC and will leverage 3 Availability Zones of the Amazon EC2 Region. Deployment architecture of the setup is given below: A small brief about setup: 3 Zookeepers will be deployed on 3 Availability Zones. ZK EC2 instances will be deployed on the Private subnet of the Amazon VPC. 3 Solr Shard EC2 instances will be deployed on Private subnet of Availability Zone 1 inside Amazon VPC. 3 Solr Replica EC2 instances will be deployed on Private subnet of Availability Zone 2 inside Amazon VPC. 3 Solr Replica EC2 instances will be deployed on Private subnet of Availability Zone 3 inside Amazon VPC. EBS optimized + PIOPS EC2 instances can be used for Solr EC2 Nodes To know more about SolrCloud Deployment best practices on Amazon VPC, Refer article: http://harish11g.blogspot.in/2013/03/Apache-Solr-cloud-on-Amazon-EC2-AWS-VPC-implementation-deployment.html Step 1: Creating Virtual Private Cloud on AWS Create a VPC with Public and Private Subnets. Assume the Load balancer and Web/App Servers can reside on the public subnet and Apache Solr Cloud will reside on the private subnet of the VPC. Step 2: Assigning the IP for the Subnets Create the subnet with its IP range. Chose the Availability zone for this subnet. Step 3: Multiple Subnets on Multiple AZ’s Create multiple subnets in Multiple AZ for building a Highly available setup for SolCloud Step 4: Install Java for Zookeeper & Solr Amazon Linux is chosen as the EC2 OS variant. Execute the following instructions on the respective EC2 nodes after their launch. EC2 instances should be launched in Multi-AZ in Multiple VPC Private Subnets. Solr uses Zookeeper as the cluster configuration and coordinator. Zookeeper is a distributed file system containing information about all the Solr Nodes. Solrconfig.xml, Schema.xml etc are stored in the repository.We have used Oracle-Sun Java over OpenJDK “sudo -s” “cd /opt” “wget --no-cookies --header "Cookie: gpw_e24=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fjava%2Fjavase%2Fdownloads%2Fjdk-7u3-download-1501626.html;" http://download.oracle.com/otn-pub/java/jdk/7u13-b20/jdk-7u13-linux-x64.rpm” “mv jdk-7u10-linux-x64.rpm?AuthParam=1357217677_76ec3d8d9a3644f4b9ec1ea79e1fcf33 jdk-7u10-linux-x64.rpm jdk-7u10-linux-x64.rpm” “sudo rpm -ivh jdk-7u10-linux-x64.rpm” “alternatives --install /usr/bin/java java /usr/java/jdk1.7.0_10/jre/bin/java 20000” “alternatives --install /usr/bin/javaws javaws /usr/java/jdk1.7.0_10/jre/bin/javaws 20000” “alternatives --install /usr/bin/javac javac /usr/java/jdk1.7.0_10/bin/javac 20000” “alternatives --install /usr/bin/jar jar /usr/java/jdk1.7.0_10/bin/jar 20000” “alternatives --install /usr/bin/java java /usr/java/jre1.7.0_10/bin/java 20000” “alternatives --install /usr/bin/javaws javaws /usr/java/jre1.7.0_10/bin/javaws 20000” “alternatives --configure java” Add JAVA_HOME in .bash_profile: “vim ~/.bash_profile” export JAVA_HOME="/usr/java/jdk1.7.0_09" export PATH=$PATH:$JAVA_HOME/bin Restart the instance. “init 6” Check the version of Java installed using “java -version” command Step 5: Configure the ZooKeeper (v3.4.5) Ensemble: Since single Zookeeper is not ideal for a large Solr cluster (because of SPOF), it is recommended to configure multiple Zookeepers in concert as an ensemble .In this step we will install and configure 3 ZooKeeper EC2 nodes spanning across 3 different Availability Zones in respective Private Subnets inside a VPC.Zookeeper will be configured on Amazon Linux. “sudo yum update” “sudo -s” “ cd /opt” “wget http://apache.techartifact.com/mirror/zookeeper/zookeeper-3.4.5/zookeeper-3.4.5.tar.gz” “tar -xzvf zookeeper-3.4.5.tar.gz” “rm zookeeper-3.4.5.tar.gz” “cd zookeeper-3.4.5” “cp conf/zoo_sample.cfg conf/zoo.cfg” Add the following lines in zoo.cfg “vim conf/zoo.cfg” dataDir=/data server.1=[zk-server01-ip]:2888:3888 server.2=[zk-server02-ip]:2888:3888 server.3=[zk-server03-ip]:2888:3888 “cd /opt/zookeeper/data” “vim myid” 1 or 2 or 3 respectively on each ZooKeeper EC2 instances in Multi-AZ #Starting ZooKeeper Program. “bin/zkServer.sh start” Follow the above steps in all the ZooKeeper servers. ReferClustered (Multi-Server) SetupandConfiguration Parameters for understandingquorum_port,leader_election_port and the filemyid. Every ZooKeeper node needs to know about every other ZK EC2 node in the ensemble, and a majority of EC2’s (called a Quorum) are needed to provide the service. Make sure the VPC IP of all the Zookeepers are given in every ZK node, like the one in following command. server.1=:: server.2=:: server.3=:: Step 6: Configuring Solr 4.1 EC2 node In this step we will install and configure 3 Apache Solr4.1 Shard EC2 instances in a single Amazon AZ and 2 Solr Replicas in another AZ in their respective Private subnets. Please note that we have to specify all the ZooKeeper (ZK) hosts on every Solr instance as below. Note: Solr gets comes with jetty in default, it is suggested to use tomcat for production nodes. Perform the following after launching EC2 instances in Multi-AZ in Multiple VPC Private Subnets. “sudo -s” “yum update” “cd /opt” “wget http://apache.techartifact.com/mirror/lucene/solr/4.1.0/apache-solr-4.1.0.tgz” “tar -xzvf apache-solr-4.1.0.tgz” “rm -f apache-solr-4.1.0.tgz” On Solr Shard/Replica Instances: “cd /opt/apache-solr-4.0.0/example/” “vim /opt/apache-solr-4.0.0/example/solr/collection1/conf/solrconfig.xml” Change /var/data/solr to /data Starting Solr4.1 Shard/Replica Java Program. “java -Dbootstrap_confdir=./solr/collection1/conf -Dcollection.configName=SolrCloud4.1-Conf -DnumShards=3 -DzkHost=[zk-server01-ip]:2181,[zk-server02-ip]:2181,[zk-server03-ip]:2181 -jar start.jar “java -DzkHost= DzkHost=:,:,: -jar start.jar” -DnumShards: the number of shards that will be present. Note that once set, this number cannot be increased or decreased without re-indexing the entire data set. (Dynamically changing the number of shards is part of the Solr roadmap!) -DzkHost: a comma-separated list of ZooKeeper servers. -Dbootstrap_confdir, -Dcollection.configName: these parameters are specified only when starting up the first Solr instance. This will enable the transfer of configuration files to ZooKeeper. Subsequent Solr instances need to just point to the ZooKeeper ensemble. The above command with –DnumShards=3 specifies that it is a 3-shard cluster. The first Solr EC2 node automatically becomes shard1 and the second Solr EC2 node automatically becomes shard2 …. What happens when we launch fourth Solr instance in this cluster? Since it’s a 3-shard cluster, the fourth Solr EC2 node automatically becomes a replica of shard1 and the fifth Solr EC2 node becomes a replica of shard2. Step 7: AWS Security Group TCP Ports to be enabled: Configure the following TCP ports on the AWS security group to allow access between Solr and ZK nodes deployed in Multiple AZ. Solr Shards/Replicas will connect to ZK through TCP Port 2181 Solr Web Interface with Jetty container through TCP Port 8983 Solr Web Interface with Tomcat container through TCP Port 8080 Every instance that is part of the ZooKeeper ensemble should know about every other machine in the ensemble. We can accomplish this with the series of lines of the form server.id=host:port:port For example, server.1=[vpc-ip]:2888:3888 server.2=[vpc-ip]:2888:3888 server.3=[vpc-ip]:2888:3888 TCP Ports 2888, 3888 should be opened for ZK Ensemble.

I've been working as a Scrum Master and as an Agile Coach for a good few years now, mainly as a contractor. Each time I am interviewed for a new contract I always like to ask if I can meet the teams I’d be working with. You see, time and again it will be a manager who does the interviewing, while the team members themselves are left with little say in whether I should be hired. I think it’s important that they reckon they can get along with me. Of course, it also gives me an opportunity to see them, and to gain a fuller understanding of the situation I’d really be walking into. As we head towards the desks of my prospective team, one of the first things I look for is the board, whether it be a Scrum task board or a Kanban board. Most teams with agile aspirations…or agile pretensions…will have set up a board of some kind. A board is the "grand old dame" of information radiators. No matter how much the details of a sordid past are glossed over, the truth always seems to come out. It's in the nature of a board to tell the truth, since any untruths can be quickly exposed. The story I can piece together from dubious lanes and columns, misplaced or missing tickets, misplaced or missing avatars, and a host of other shibboleths can be far more telling than anything I get to hear from people in an interview situation. Another of the things I look for is a "fast track" lane on a Scrum Team's board. These are very common; you could say it is almost unusual not to see them. From a certain perspective they are good things to have, and they can imply a level of maturity - or at least of pragmatism - on the part of a team. They suggest that the team accepts that not everything can be predicted in Sprint planning. A fast track lane is a nod to the fact that emergencies happen, that support work and unforeseen defect fixes still need to be done, and most importantly, that the team has a way of dealing with all of this. However it also shows that they aren't doing Scrum. There...I've said it. Fast track lanes aren't part of Scrum. It's that simple. I don't mean to say that they are bad practice, or in some sense un-agile. On the contrary, they are part of the Lean Kanban approach to varying the Quality of Service provided to certain backlog items. That's what a fast track lane is...a way of varying the quality of service that a Scrum team gives to certain items. When something hits a fast track lane, a well-trained team will swarm over it and decide who is best qualified to progress the matter. While they do this, their own tasks will be marked as impeded or blocked. Then, the decision made, all others return to their work in progress. So if fast track lanes are a widely understood and practical way of managing operational issues, what is wrong with them, Scrum-wise? The answer is that Scrum - unlike Lean Kanban - doesn't provide for variations in quality of service. Each piece of work is prioritized and negotiated into a Sprint backlog. The team then self-organizes to deliver a corresponding increment of functionality. The team will plan with the Product Owner what it intends to do during a sprint, and the sprint backlog they agree to belongs to them. No-one, not even the CEO of the organization, can override their sprint backlog by introducing work to be "fast tracked". The team wholly owns their sprint backlog. That's Scrum. When I point this out, teams can become crestfallen or even defensive. “What else are we supposed to do”, they say. “We aren’t dedicated 100% to doing project work. We still have support work to do, and serious issues always trump development. We have to fix them and put project work on hold.” My answer to that is that under the circumstances the team is facing, it may indeed be right to vary the quality of service by fast-tracking support work. It just isn’t Scrum, that’s all. It’s a type of "Scrumban", a Scrum variant that includes Kanban characteristics. This is no fault of the team, but it could suggest a problem higher up. Perhaps a dedicated Kanban support team hasn’t been properly resourced and trained so that Scrum development can proceed unimpeded. Perhaps the Product Owner is being undermined by other managers who have separate interests impacting the development. Whatever the situation, it needs to be made transparent and acknowledged by all stakeholders. So, the next step…and the one I’ll often indicate as the interview progresses…is to account for fast track work as impediments against product burndown or velocity. Moreover, these are impediments which are external to the team. It’s essentially a type of waste, or unplanned work, being generated from outside. It needs to be made quite transparent where this waste is coming from and what can be done to mitigate it. What can be done about those other teams, or workflows, or managers, who are undercutting this Scrum team’s ability to plan out their Sprints? Often, the source of these impediments will be the people interviewing me...and that’s when things can start to get really interesting!

Generally, you pick up a subset of components in some integration tests to check if they are glued as expected. To achieve this, they are usually really invoked, but sometimes, it is too expensive to do so. For example, Component A invokes Component B, and Component B has a dependency on an external system which does not have a test server. We really want to verify the configurations, it seems the only way is replacing Component B with test double after wiring Component A and B. Let's start with Strategy A: Manual Injecting @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration(locations = "classpath:config.xml") public class SomeAppIntegrationTestsUsingManualReplacing { private Mockery context = new JUnit4Mockery(); （1） private SomeInterface mock = context.mock(SomeInterface.class); （2） @Resource(name = "someApp") private SomeApp someApp; （3） @Before public void replaceDependenceWithMock() { someApp.setDependence(mock); （4） } @DirtiesContext @Test public void returnsHelloWorldIfDependenceIsAvailable() throws Exception { context.checking(new Expectations() { { allowing(mock).isAvailable(); will(returnValue(true)); （5） } }); String actual = someApp.returnHelloWorld(); assertEquals("helloWorld", actual); context.assertIsSatisfied(); （6） } } We get a spring bean someApp(Component A in this case), and it has a denpendence on SomeInterface's(Component B in this case). We inject mock (declare and init at step 4) to someApp, thus the test passes without sending request to the external system. The context.assertIsSatisfied()(at step 6 ) is very important as we use SpringJUnit4ClassRunner as junit runner instead of JMock, so you have to explictly assert that all expectations are satisfied. There are two downsides of the previous strategy: Firstly, if there are more than one mock, you have to inject them one by one, which is very tedious especially when you need to inject mocks into serveral spring bean. Secondly, the wiring is not tested. For example, if I forget to write the integration tests using manual inject strategy is not going to tell. Strategy B: Using predefined BeanPostProcessor Spring provides BeanPostProcessor which is very useful when you want to replace some bean after the wiring is done. According to the reference, application context will auto detect all BeanPostProcessor registered in metadata(usually in xml format). public class PredefinedBeanPostProcessor implements BeanPostProcessor { public Mockery context = new JUnit4Mockery(); （1） public SomeInterface mock = context.mock(SomeInterface.class); （2） @Override public Object postProcessBeforeInitialization(Object bean, String beanName) throws BeansException { return bean; } @Override public Object postProcessAfterInitialization(Object bean, String beanName) throws BeansException { if ("dependence".equals(beanName)) { return mock; } else { return bean; } } } @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration(locations = { "classpath:config.xml", "classpath:predefined.xml" }) （1） public class SomeAppIntegrationTestsUsingPredefinedReplacing { @Resource(name = "someApp") private SomeApp someApp; @Resource(name = "predefined") private PredefinedBeanPostProcessor fixture; @Test public void returnsHelloWorldIfDependenceIsAvailable() throws Exception { fixture.context.checking(new Expectations() { { allowing(fixture.mock).isAvailable(); will(returnValue(true)); } }); String actual = someApp.returnHelloWorld(); assertEquals("helloWorld", actual); fixture.context.assertIsSatisfied(); } } Notice there is an extra config xml in which the PredefinedBeanPostProcessor is registered(at step 1). The predefined.xml is placed in src/test/resources/, so it will not be packed into the artifact for production. For each test, using Strategy B requires inputting both a java file and a xml which is quite verbose. Now we have learned the pros and cons of Strategy A and Strategy B. What about a hybrid version -- killing two birds with one stone. Therefore we have the next strategy. Strategy C：Dynamic Injecting public class TestDoubleInjector implements BeanPostProcessor { private static Map MOCKS = new HashMap(); （1） @Override public Object postProcessBeforeInitialization(Object bean, String beanName) throws BeansException { return bean; } @Override public Object postProcessAfterInitialization(Object bean, String beanName) throws BeansException { if (MOCKS.containsKey(beanName)) { return MOCKS.get(beanName); } return bean; } public void addMock(String beanName, Object mock) { MOCKS.put(beanName, mock); } public void clear() { MOCKS.clear(); } } @RunWith(JMock.class) public class SomeAppIntegrationTestsUsingDynamicReplacing { private Mockery context = new JUnit4Mockery(); private SomeInterface mock = context.mock(SomeInterface.class); private SomeApp someApp; private ConfigurableApplicationContext applicationContext; private TestDoubleInjector fixture = new TestDoubleInjector(); （1） @Before public void replaceDependenceWithMock() { fixture.addMock("dependence", mock); （2） applicationContext = new ClassPathXmlApplicationContext(new String[] { "classpath:config.xml", "classpath:dynamic.xml" }); （3） someApp = (SomeApp) applicationContext.getBean("someApp"); } @Test public void returnsHelloWorldIfDependenceIsAvailable() throws Exception { context.checking(new Expectations() { { allowing(mock).isAvailable(); will(returnValue(true)); } }); String actual = someApp.returnHelloWorld(); assertEquals("helloWorld", actual); } @After public void clean() { applicationContext.close(); fixture.clear(); } } The TestDoubleInjector class is an implementation of Monostate pattern. Mocks are added to the static map before the application context being created. When another TestDoubleInjector instance (defined in dynamic.xml) is initiated, it can share the static map for replacement. Just beware to clear the static map after tests. By the way, you could use Stub instead of Mocks with same strategies. Please do not hesitate to contact me if you might have any questions. And I do appreciate it, if you could let me know you have a better idea. Thanks! Resources： http://www.jmock.org http://www.oracle.com/technetwork/articles/entarch/spring-aop-with-ejb5-093994.html(I saw BeanPostProcessor the first time in this post)

Apache Subversion remembers every change committed to the repository, making it possible to revert to previous revisions of your project. Users of SmartSVN, the cross-platform client for SVN, can easily perform a revert using the built-in ‘Transactions’ window. Simply right-click on the revision you wish to revert to in SmartSVN’s ‘Transactions’ window (by default, this window is located in the bottom right-hand corner of your SmartSVN screen) and select ‘Rollback.’ Alternatively, reverse merges can be performed through the ‘Merge’ dialogue: 1) Select ‘Merge’ from SmartSVN’s ‘Modify’ menu. 2) In the Merge dialogue, enter the revision number you’re reverting to. If you’re not sure of the revision you should be targeting, click the ‘Select…’ button next to the ‘Revision Range’ textbox. In the subsequent dialogue, you can review information about the different revisions, including the commit message, author and the timestamp of the commit. 3) Ensure ‘Reverse merge’ is selected and click ‘Merge.’ 4) Remember to commit the reverse merge to the repository to share this change with the rest of your team!

in a set, there are no duplicate elements. that is one of the major reasons to use a set. there are 3 commonly used implementations of set in java: hashset, treeset and linkedhashset. when and which to use is an important question. in brief, if we want a fast set, we should use hashset; if we need a sorted set, then treeset should be used; if we want a set that can be read by following its insertion order, linkedhashset should be used. 1. set interface set interface extends collection interface. in a set, no duplicates are allowed. every element in a set must be unique. we can simply add elements to a set, and finally we will get a set of elements with duplicates removed automatically. 2. hashset vs. treeset vs. linkedhashset hashset is implemented using a hash table. elements are not ordered. the add, remove, and contains methods has constant time complexity o(1). treeset is implemented using a tree structure(red-black tree in algorithm book). the elements in a set are sorted, but the add, remove, and contains methods has time complexity of o(log (n)). it offers several methods to deal with the ordered set like first(), last(), headset(), tailset(), etc. linkedhashset is between hashset and treeset. it is implemented as a hash table with a linked list running through it, so it provides the order of insertion. the time complexity of basic methods is o(1). 3. treeset example treeset tree = new treeset(); tree.add(12); tree.add(63); tree.add(34); tree.add(45); iterator iterator = tree.iterator(); system.out.print("tree set data: "); while (iterator.hasnext()) { system.out.print(iterator.next() + " "); } output is sorted as follows: tree set data: 12 34 45 63 now let's define a dog class as follows: class dog { int size; public dog(int s) { size = s; } public string tostring() { return size + ""; } } let's add some dogs to treeset like the following: import java.util.iterator; import java.util.treeset; public class testtreeset { public static void main(string[] args) { treeset dset = new treeset(); dset.add(new dog(2)); dset.add(new dog(1)); dset.add(new dog(3)); iterator iterator = dset.iterator(); while (iterator.hasnext()) { system.out.print(iterator.next() + " "); } } } compile ok, but run-time error occurs: exception in thread "main" java.lang.classcastexception: collection.dog cannot be cast to java.lang.comparable at java.util.treemap.put(unknown source) at java.util.treeset.add(unknown source) at collection.testtreeset.main(testtreeset.java:22) because treeset is sorted, the dog object need to implement java.lang.comparable's compareto() method like the following: class dog implements comparable{ int size; public dog(int s) { size = s; } public string tostring() { return size + ""; } @override public int compareto(dog o) { return size - o.size; } } the output is: 1 2 3 4. hashset example hashset dset = new hashset(); dset.add(new dog(2)); dset.add(new dog(1)); dset.add(new dog(3)); dset.add(new dog(5)); dset.add(new dog(4)); iterator iterator = dset.iterator(); while (iterator.hasnext()) { system.out.print(iterator.next() + " "); } output: 5 3 2 1 4 note the order is not certain. 5. linkedhashset example linkedhashset dset = new linkedhashset(); dset.add(new dog(2)); dset.add(new dog(1)); dset.add(new dog(3)); dset.add(new dog(5)); dset.add(new dog(4)); iterator iterator = dset.iterator(); while (iterator.hasnext()) { system.out.print(iterator.next() + " "); } the order of the output is certain and it is the insertion order. 2 1 3 5 4 6. performance testing the following method tests the performance of the three class on add() method. public static void main(string[] args) { random r = new random(); hashset hashset = new hashset(); treeset treeset = new treeset(); linkedhashset linkedset = new linkedhashset(); // start time long starttime = system.nanotime(); for (int i = 0; i < 1000; i++) { int x = r.nextint(1000 - 10) + 10; hashset.add(new dog(x)); } // end time long endtime = system.nanotime(); long duration = endtime - starttime; system.out.println("hashset: " + duration); // start time starttime = system.nanotime(); for (int i = 0; i < 1000; i++) { int x = r.nextint(1000 - 10) + 10; treeset.add(new dog(x)); } // end time endtime = system.nanotime(); duration = endtime - starttime; system.out.println("treeset: " + duration); // start time starttime = system.nanotime(); for (int i = 0; i < 1000; i++) { int x = r.nextint(1000 - 10) + 10; linkedset.add(new dog(x)); } // end time endtime = system.nanotime(); duration = endtime - starttime; system.out.println("linkedhashset: " + duration); } from the output below, we can clearly wee that hashset is the fastest one. hashset: 2244768 treeset: 3549314 linkedhashset: 2263320 if you enjoyed this article and want to learn more about java collections, check out this collection of tutorials and articles on all things java collections.

Amazon Virtual Private Cloud (VPC) is a great way to setup an isolated portion of AWS and control the network topology. It is a great way to extend your data center and use AWS for burst requirements. With the latest VPC for Everyone announcement, what was earlier "Classic" and "VPC" in AWS will soon be only VPC. That is, every deployment in AWS will be on a VPC even though one might not need all the additional features that VPC provides. One might eventually start looking at utilizing VPC features such as multiple Subnets, Network isolation, Network ACLs, etc.. Those who have already worked with VPC's understand the role of NAT Instance in a VPC. When you create a VPC, you create them with multiple Subnets (Public and Private). Instances launched in the Public Subnet have direct internet connectivity to send and receive internet traffic through the internet gateway of the VPC. Typically, internet facing servers such as web servers are kept in the Public Subnet. A Private Subnet can be used to launch Instances that do not require direct access from the internet. Instances in a Private Subnet can access the Internet without exposing their private IP address by routing their traffic through a Network Address Translation (NAT) instance in the Public Subnet. AWS provides an AMI that can be launched as a NAT Instance. Following diagram is the representation of a standard VPC that gets provisioned through the AWS Management Console wizard. Standard Private and Public Subnets in a VPC The above architecture has A Public Subnet that has direct internet connectivity through the Internet Gateway. Web Instances can be placed within the Public Subnet The custom Route Table associated with Public Subnet will have the necessary routing information to route traffic to the Internet Gateway A NAT Instance is also provisioned in the Public Subnet A Private Subnet that has outbound internet connectivity through the NAT Instance in the Public Subnet The Main Route Table is by default associated with the Private Subnet. This will have necessary routing information to route internet traffic to the NAT Instance Instances in the Private Subnet will use the NAT Instance for outbound internet connectivity. For example, DB backups from standby that needs to be stored in S3. Background programs that make external web services calls Of course, the above architecture has limited High Availability since all the Subnets are created within the same Availability Zone. We can avoid this by creating multiple Subnets in multiple Availability Zones. Public and Private Subnets with multiple Availability Zones Additional Subnets (Public and Private) are created in one another Availability Zone Both Private Subnets are attached to the Main Routing Table Both Public Subnets are attached to the same Custom Routing Table Instances in the Private Subnet still continue to use the NAT Instance for outbound internet connectivity Though we increased the High Availability by utilizing multiple Availability Zones, the NAT Instance is still a Single Point of Failure. NAT Instance is just another EC2 Instance that can become unavailable any time. The updated architecture below uses two NAT Instances to provide failover and High Availability for the NAT Instances NAT Instance High Availability Each Subnet is associated with its own Route Table NAT1 is provisioned in Public Subnet 1 NAT2 is provisioned in Public Subnet 2 Private Subnet 1's Route Table (RT) has routing entry to NAT1 for internet traffic Private Subnet 2's Route Table (RT) has routing entry to NAT2 for internet traffic NAT Instance HA Illustration A script can be installed on both the NAT Instances to monitor each other and swap the routing table association if one of them fails. For example, if NAT1 detects that NAT2 is not responding to its ping requests, it can change the Route Table of Private Subnet 2 to NAT1 for internet traffic. Once NAT2 becomes operational again, a reverse swapping can happen. AWS has a pretty good documentation on this and a sample script for the swapping. Apart from HA, the above architecture also provides better overall throughput, since during normal conditions, both NAT Instances can be used to drive the outbound internet requirements of the VPC. If there are workloads that requires a lot of outbound internet connectivity, having more than one NAT Instance would make sense. Of course, you are still limited with one NAT Instance per Subnet.

If you are using Amazon Web Services(AWS), you are probably aware how to access and use resources like SNS, SQS, S3 using key and secret. With the aws-java-sdk that is straight forward: AmazonSNSClient snsClient = new AmazonSNSClient( new BasicAWSCredentials("your key", "your secret")) One of the difficulties with this approach is storing the key/secret securely especially when there are different set of these for different environments. Using java property files, combined with maven or spring profiles might help a little bit to externalize the key/secret out of your source code, but still doesn't solve the issue of securely accessing these resources. Amazon has another service to help you in this occasion. No, no, this is not one more service to pay for in order to use the previous services. It is a free service, actually it is a feature of the amazon account. AWS Identity and Access Management (IAM) lets you securely control access to AWS services and resources for your users, you can manage users and groups and define permissions for AWS resources. One interesting functionality of IAM is the ability to assign roles to EC2 instances. The idea is you create roles with sets of permissions and you launch an EC2 instance by assigning the role to the instance. And when you deploy an application on that instance, the application doesn't need to have access key and secret in order to access other amazon resource. The application will use the role credentials to sign the requests. This has a number of benefits like a centralized place to control all the instances credentials, reduced risk with auto refreshing credentials and so on. Here is a short video demonstrating how to assign roles to an EC2 instance: Once you have role based security enabled for an instance, to access other resources from that instances you have to create and AwsClient using the chained credential provider: AmazonSNSClient snsClient = new AmazonSNSClient( new DefaultAWSCredentialsProviderChain()) The provider will search your system properties, environment properties and finally call instance metadata API to retrieve the role credentials in chain of responsibility fashion. It will also refresh the credentials in the background periodically depending on its expiration period. And finally, if you want to use role based security from Camel applications running on Amazon, all you have to do is create an instance of the client with configured chained credentials object and don't specify any key or secret: from("direct:start") .to("aws-sns://MyTopic?amazonSNSClient=#snsClient");

What would you expect from someone who is OFBiz and Camel committer? To integrate them for fun? Fine, here it is. In addition to being fun, I believe this integration will be of real benefit for the OFBiz community, because despite the fact of being a complete ERP software, OFBiz lacks the ability to easily integrate with external systems. The goal of this project is instead of reinventing the wheel and trying to integrate OFBiz with each system separately, integrate it with Camel and let Camel do what it does best: connect your application with every possible protocol and system out there. Quick OFBiz introduction The Apache Open For Business Project is an open source, enterprise automation software. It consist mainly from two parts: A full-stack framework for rapid business application development. It has Entity Engine for the data layer (imagine something like iBATIS and Hibernate combined). It is the same entity engine that powers millions of Attlasian Jira instances. But don't get me wrong, it is not meant for usage outside of OFBiz framework, so use it only as OFBiz data layer. Service Engine - this might be hard to grasp for someone only with DDD background, but OFBiz doesn't have any domain objects. Instead for the service layer it uses SOA and has thousands of services that contains the business logic. A service is an atomic bit of isolated business logic, usually reading and updating the database. If you need you can make services triggering each other using ECAs(event-condition-action) which is kind of rule engine that allows define pre/post conditions for triggering other service calls when a service is executed. The service itself can be written written in java, groovy or simple language (an XML DSL for simple database manipulation) and usually requires authentication, authorisation and finally executed in a transaction. UI widgets - an XML DSL which allows you easily create complex pages with tables, forms and trees. And the really great thing about this framework is that 'The whole is greater than the sum of its parts' - all of the above layers works together amazingly: if you have an entity definition (a table) in your data layer, you can use it in your service layer during your service interface definition or its implementation. It takes one line of code(a long one) to create a service which has as input parameters the table columns and return the primary key as result of the service. Then if you are creating a screen with tables or forms, you can base it on your entity definitions or service definitions. It is again only few lines of code to create a form with fields mapping to a service or entity fields. Out of the box business applications. These are vertical applications for managing the full life cycle of a business domain like ordering, accounting, manufacturing and many more in a horizontally integrated manner. So creating an order from order or ecommerce application will interact with facility to check whether a product is available, and after the order is created will create accounting transaction in accounting application. Before the order is shipped from the facility, it will create invoices and once the invoice is paid, it will close the order. You get the idea. Camel in 30 seconds Apache Camel is an integration framework based on known Enterprise Integration Patterns(EIP). Camel can also be presented as consisting of two artifacts: The routing framework which can be defined using java, scala, xml DSL with all the EIPs like Pipe, Filter, Router, Splitter, Aggregator, Throttler, Normalizer and many more. Components and transformers ie all the different connectors to more than 100 different applications and protocols like: AMQP, AWS, web services, REST, MongoDB, Twitter, Websocket, you name it. If you can imagine a tool, that enables you to consume data from one system, then manipulate the data (transform, filter, split, aggregate) and send it to other systems, using a declarative, concise, English-like DSL without any boilerplate code - that's Apache Camel. Let OFBiz talk to all of the systems Camel do The main interaction point with OFBiz are either by using the Entity Engine for direct data manipulation or by calling services through Service Engine. The latter is preferred because it ensures that the user executing the service is authorised to do so, the operation is transactional to ensure data integrity, and also all the business rules are satisfied (there might be other services that have to be executed with ECA rules). So if we can create an OFBiz endpoint in Camel and execute OFBiz services from Camel messages, that would allow OFBiz to receive notifications from Camel endpoints. What about the other way around - making OFBiz notify Camel endpoints? The ideal way would be to have an OFBiz service that sends the IN parameters to Camel endpoints as message body and headers and return the reply message as OFBiz service response. If you are wondering: why is it so great, what is an endpoint, where is the real world, who is gonna win Euro2012... have a look at the complete list of available Camel components, and you will find out the answer. Running Camel in OFBiz container I've started an experimental ofbiz-camel project on github which allows you to do all of the above. It demonstrates how to poll files from a directory using Camel and create notes in OFBiz with the content of the file using createNote service. The project also has an OFBiz service, that enables sending messages from OFBiz to Camel. For example using that service it is possible to send a message to Camel file://data endpoint, and Camel will create a file in the data folder using the service parameters. The integration between OFBiz and Camel is achieved by running Camel in an OFBiz container as part of the OFBiz framework. This makes quite tight integration, but ensures that there will not be any http, rmi or any other overhead in between. It is still WIP and may change totally. Running Camel and OFBiz separately Another approach is KISS: run Camel and OFBiz as they are - separate applications, and let them interact with RMI, WS* or something else. This doesn't require any much coding, but only configuring both systems to talk to each other. I've created a simple demo camel-ofbiz-rmi which demonstrates how to listen for tweets with a specific keyword and store them in OFBiz as notes by calling createNote service using RMI. It uses Camel's twitter and rmi components and requires only configuration. Notice that this example demonstrates only one way interaction: from Camel to OFBiz. In order to invoke a Camel endpoint from OFBiz you can you have to write some RMI, WS* or other code. PS: I'm looking forward to hear your real world integration requirements for OFBiz.

Way 1. Simple method call Object A calls a method on object B. This is clearly the simplest type of communication between two objects but is also the way which results in the highest coupling. Object A’s class has a dependency upon object B’s class. Wherever you try to take object A’s class, object B’s class (and all of its dependencies) are coming with it. Way 2. Decouple the callee from the caller Object A’s class declares an interface and calls a method on that interface. Object B’s class implements that interface. This is a step in the right direction as object A’s class has no dependency on object B’s class. However, something else has to create object B and introduce it to object A for it to call. So we have created the need for an additional class which has a dependency upon object B’s class. We have also created a dependency from B to A. However, these can be a small price to pay if we are serious about taking object A’s class off to other projects. Way 3. Use an Adaptor Object A’s class declares an interface and calls a method on that interface. An adaptor class implements the interface and wraps object B, forwarding calls to it. This frees up object B’s class from being dependent on object A’s class. Now we are getting closer to some real decoupling. This is particularly useful if object B’s class is a third-party class which we have no control over. Way 4. Dependency Injection Dependency injection is used to find, create and call object B. This amounts to deferring until runtime how object A will talk to object B. This way certainly feels to have the lowest coupling, but in reality just shifts the coupling problem into the wiring realm. At least before we could rely on the compiler to ensure that there was a concrete object on the other end of each call – and furthermore we had the convenience of using the development tools to help us unpick the interaction between objects. Way 5. Chain of command pattern The chain of command pattern is used to allow object A to effectively say “does anyone know how to handle this call?”. Object B, which is listening out for these cries for help, picks up the message and figures out for itself if it is able to respond. This approach does mean that object A has to be ready for the outcome that nobody is able to respond, however it buys us great flexibility in how the responder is implemented. Chain of command – way 5 – is the decoupling winner and here's an example to help explain why. Let object A be a raster image file viewer, with responsibilities for allowing the user to pick the file to open, and zoom in and out on the image as it is displayed. Let object B be a loader which has the responsibility of opening a gif file and returning an array of colored pixels. Our aim is to avoid tying object A's class to object B's class because object B's class uses a third party library. Additionally, object A doesn't want to know about how the image file is interpreted, or even if it is a gif, jpg, png or whatever. In this example object B, or more likely a wrapper of object B, will declare a method which equips it to respond to any requests to open an image file. The method will respond with an array of pixels if the file is of a format it recognizes, or respond with null if it does not recognize the format. The framework then simply asks handlers in turn until one provides a non-null response. With this framework in place we are now free to slide in more image loaders with the addition of just one more handler class. And furthermore, on the source end of the call, we can add other classes to not just view the images, but print them, edit them or manipulate them in any other way we choose. In conclusion, we can see that decoupling can be achieved and yield flexibility, but this does not mean it is appropriate for every call from one object to another. The best thing to do is start with straight method calls, but keep cohesion in mind. Then if at a later stage it becomes necessary to swap in and out different objects it won't be too hard to extract an interface and put in place a decoupling mechanism.

If you are using Visual Studio plugin for Git, but you have also configured Git with MSys git, probably you could be surprised by some Visual Studio behavior.