The JAX-RS specification defines sensible defaults for the HTTP OPTIONS command. I actually stumbled upon this by chance!

In this article, excerpted from the book Docker in Action, I will show you how to open access to shared memory between containers. Linux provides a few tools for sharing memory between processes running on the same computer. This form of inter-process communication (IPC) performs at memory speeds. It is often used when the latency associated with network or pipe based IPC drags software performance below requirements. The best examples of shared memory based IPC usage is in scientific computing and some popular database technologies like PostgreSQL. Docker creates a unique IPC namespace for each container by default. The Linux IPC namespace partitions shared memory primitives like named shared memory blocks and semaphores, as well as message queues. It is okay if you are not sure what these are. Just know that they are tools used by Linux programs to coordinate processing. The IPC namespace prevents processes in one container from accessing the memory on the host or in other containers. Sharing IPC Primitives Between Containers I’ve created an image named allingeek/ch6_ipc that contains both a producer and consumer. They communicate using shared memory. Listing 1 will help you understand the problem with running these in separate containers. Listing 1: Launch a Communicating Pair of Programs # start a producer docker -d -u nobody --name ch6_ipc_producer \ allingeek/ch6_ipc -producer # start the consumer docker -d -u nobody --name ch6_ipc_consumer \ allingeek/ch6_ipc -consumer Listing 1 starts two containers. The first creates a message queue and starts broadcasting messages on it. The second should pull from the message queue and write the messages to the logs. You can see what each is doing by using the following commands to inspect the logs of each: docker logs ch6_ipc_producer docker logs ch6_ipc_consumer If you executed the commands in Listing 1 something should be wrong. The consumer never sees any messages on the queue. Each process used the same key to identify the shared memory resource but they referred to different memory. The reason is that each container has its own shared memory namespace. If you need to run programs that communicate with shared memory in different containers, then you will need to join their IPC namespaces with the --ipc flag. The --ipc flag has a container mode that will create a new container in the same IPC namespace as another target container. Listing 2: Joining Shared Memory Namespaces # remove the original consumer docker rm -v ch6_ipc_consumer # start a new consumer with a joined IPC namespace docker -d --name ch6_ipc_consumer \ --ipc container:ch6_ipc_producer \ allingeek/ch6_ipc -consumer Listing 2 rebuilds the consumer container and reuses the IPC namespace of the ch6_ipc_producer container. This time the consumer should be able to access the same memory location where the server is writing. You can see this working by using the following commands to inspect the logs of each: docker logs ch6_ipc_producer docker logs ch6_ipc_consumer Remember to cleanup your running containers before moving on: # remember: the v option will clean up volumes, # the f option will kill the container if it is running, # and the rm command takes a list of containers docker rm -vf ch6_ipc_producer ch6_ipc_consumer There are obvious security implications to reusing the shared memory namespaces of containers. But this option is available if you need it. Sharing memory between containers is safer alternative to sharing memory with the host.

In this article I will tell you how Apache Camel can turn a full-stack Linux microcomputer (like Raspberry Pi) into a device collecting the GPS coordinates.

Get a crash course in understanding microservices and the difficulties in implementing them.

[This article was written by Sveta Smirnova] Like any good, thus lazy, engineer I don’t like to start things manually. Creating directories, configuration files, specify paths, ports via command line is too boring. I wrote already how I survive in case when I need to start MySQL server (here). There is also the MySQL Sandbox which can be used for the same purpose. But what to do if you want to start Percona XtraDB Cluster this way? Fortunately we, at Percona, have engineers who created automation solution for starting PXC. This solution uses Docker. To explore it you need: Clone the pxc-docker repository:git clone https://github.com/percona/pxc-docker Install Docker Compose as described here cd pxc-docker/docker-bld Follow instructions from the README file: a) ./docker-gen.sh 5.6 (docker-gen.sh takes a PXC branch as argument, 5.6 is default, and it looks for it on github.com/percona/percona-xtradb-cluster) b) Optional: docker-compose build (if you see it is not updating with changes). c) docker-compose scale bootstrap=1 members=2 for a 3 node cluster Check which ports assigned to containers: $docker port dockerbld_bootstrap_1 3306 0.0.0.0:32768 $docker port dockerbld_members_1 4567 0.0.0.0:32772 $docker port dockerbld_members_2 4568 0.0.0.0:32776 Now you can connect to MySQL clients as usual: $mysql -h 0.0.0.0 -P 32768 -uroot Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 10 Server version: 5.6.21-70.1 MySQL Community Server (GPL), wsrep_25.8.rXXXX Copyright (c) 2009-2015 Percona LLC and/or its affiliates Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or 'h' for help. Type 'c' to clear the current input statement. mysql> 6. To change MySQL options either pass it as a mount at runtime with something like volume: /tmp/my.cnf:/etc/my.cnf in docker-compose.yml or connect to container’s bash (docker exec -i -t container_name /bin/bash), then change my.cnf and run docker restart container_name Notes. If you don’t want to build use ready-to-use images If you don’t want to run Docker Compose as root user add yourself to docker group

Webpack is the best module bundler I’ve ever used. Just this week I used it to reduce the JS footprint of an app from 906KB to 87KB for mobile visitors. An 800KB difference! Webpack‘s core premise is that you can require('./foo') your JavaScripts. That sea of

A new book looks at how DevOps affects architectural decisions, and a software architect’s role in DevOps.

written by tim brock. scatter plots are a wonderful way of showing ( apparent ) relationships in bivariate data. patterns and clusters that you wouldn't see in a huge block of data in a table can become instantly visible on a page or screen. with all the hype around big data in recent years it's easy to assume that having more data is always an advantage. but as we add more and more data points to a scatter plot we can start to lose these patterns and clusters. this problem, a result of overplotting, is demonstrated in the animation below. the data in the animation above is randomly generated from a pair of simple bivariate distributions. the distinction between the two distributions becomes less and less clear as we add more and more data. so what can we do about overplotting? one simple option is to make the data points smaller. (note this is a poor "solution" if many data points share exactly the same values.) we can also make them semi-transparent. and we can combine these two options: these refinements certainly help when we have ten thousand data points. however, by the time we've reached a million points the two distributions have seemingly merged in to one again. making points smaller and more transparent might help things; nevertheless, at some point we may have to consider a change of visualization. we'll get on to that later. but first let's try to supplement our visualization with some extra information. specifically let's visualize the marginal distributions . we have several options. there's far too much data for a rug plot , but we can bin the data and show histograms . or we can use a smoother option - a kernel density plot . finally, we could use the empirical cumulative distribution . this last option avoids any binning or smoothing but the results are probably less intuitive. i'll go with the kernel density option here, but you might prefer a histogram. the animated gif below is the same as the gif above but with the smoothed marginal distributions added. i've left scales off to avoid clutter and because we're only really interested in rough judgements of relative height. adding marginal distributions, particularly the distribution of variable 2, helps clarify that two different distributions are present in the bivariate data. the twin-peaked nature of variable 2 is evident whether there are a thousand data points or a million. the relative sizes of the two components is also clear. by contrast, the marginal distribution of variable 1 only has a single peak, despite coming from two distinct distributions. this should make it clear that adding marginal distributions is by no means a universal solution to overplotting in scatter plots. to reinforce this point, the animation below shows a completely different set of (generated) data points in a scatter plot with marginal distributions. the data again comes from a random sample of two different 2d distributions, but both marginal distributions of the complete dataset fail to highlight this separation. as previously, when the number of data points is large the distinction between the two clusters can't be seen from the scatter plot either. returning to point size and opacity, what do we get if we make the data points very small and almost completely transparent? we can now clearly distinguish two clusters in each dataset. it's difficult to make out any fine detail though. since we've lost that fine detail anyway, it seems apt to question whether we really want to draw a million data points. it can be tediously slow and impossible in certain contexts. 2d histograms are an alternative. by binning data we can reduce the number of points to plot and, if we pick an appropriate color scale, pick out some of the features that were lost in the clutter of the scatter plot. after some experimenting i picked a color scale that ran from black through green to white at the high end. note, this is (almost) the reverse of the effect created by overplotting in the scatter plots above. in both 2d histograms we can clearly see the two different clusters representing the two distributions from which the data is drawn. in the first case we can also see that there are more counts from the upper-left cluster than the bottom-right cluster, a detail that is lost in the scatter plot with a million data points (but more obvious from the marginal distributions). conversely, in the case of the second dataset we can see that the "heights" of the two clusters are roughly comparable. 3d charts are overused, but here (see below) i think they actually work quite well in terms of providing a broad picture of where the data is and isn't concentrated. feature occlusion is a problem with 3d charts so if you're going to go down this route when exploring your own data i highly recommend using software that allows for user interaction through rotation and zooming. in summary, scatter plots are a simple and often effective way of visualizing bivariate data. if, however, your chart suffers from overplotting, try reducing point size and opacity. failing that, a 2d histogram or even a 3d surface plot may be helpful. in the latter case be wary of occlusion.

Introduction Here in this article we are trying to discuss about the finding reference object within stored procedure and also finding the calling procedure references. Hope you like it and it will be informative. What We Want Developers are writing several stored procedure almost every day. Sometimes developers need to know about the information such as what object is used within the stored procedure or from where (SP) the specified stored procedure call. This is the vital information for the developer before working on a particular stored procedure. Here we are representing a pictorial diagram to understand the nature of implementation. Now we have to answer some question 1. What are the DB Object used in Stored Procedure1 and there type. 2. In case of Store Procedure3 which procedure calls the Store Procedure3 So we are not going to read the Stored Procedure to find the answer. Suppose the each procedure have more than 3000 line. How We Solve the Answer To solve the answer first we take the example and create an example scenario to understand it. -- Base Table CREATE TABLE T1 (EMPID INT, EMPNAME VARCHAR(50)); GO CREATE TABLE T2 (EMPID INT, EMPNAME VARCHAR(50)); GO --1 CREATE PROCEDURE [dbo].[Procedure1] AS BEGIN SELECT * FROM T1; SELECT * FROM T2; EXEC [dbo].[Procedure3]; END GO --2 CREATE PROCEDURE [dbo].[Procedure2] AS BEGIN EXEC [dbo].[Procedure3]; END GO --3 CREATE PROCEDURE [dbo].[Procedure3] AS BEGIN SELECT * FROM T1; END GO Now we are going to solve the question What are the DB Object used in Stored Procedure1 and there type. sp_depends Procedure1 In case of Store Procedure3 which procedure calls the Store Procedure3 SELECT OBJECT_NAME(id) AS [Calling SP] FROM syscomments WHERE [text] LIKE '%Procedure3%' GROUP BY OBJECT_NAME(id); Hope you like it.

16 Apr 2015 In a year defined by international expansion and investments in new infrastructure to enhance operational efficiency, Gulftainer recorded robust growth across its entire terminal portfolio. Iain Rawlinson, Group Commercial Director of Gulftainer said: “The positive growth recorded by Gulftainer across its terminals globally underlines the confidence of our partners in our ability to meet their requirements efficiently. Our extensive network and technological expertise are the strengths that have enabled us to expand our footprint to new locations. We continuously invest in enhancing our infrastructure, thus boosting reliability, operational efficiency and productivity.” He added: “The growth in volume achieved throughout our terminals is strong testament to the expertise and dedication of our employees and the strong productivity levels we are able to achieve on a consistent basis. In the dynamic global trade routes linking Asia and Europe, our terminals today play an increasingly significant role. Even as we expand and grow our business, we also remain committed to the communities we serve in by creating new jobs and supporting the domestic economy.” In global markets, Gulftainer’s Saudi terminals recorded impressive growth with Northern Container Terminal accounting for 1.9 million TEUs, sustaining previous-year trends, while Jubail Container Terminal (JCT) noted a growth of 22 per cent to over 396,000 TEUs. The total volume at the Saudi terminals was over 2.29 million TEUs. Gulftainer’s Umm Qasr terminal also accomplished a significant growth of 46 per cent in 2014, while the Recife terminal in Brazil marked a growth in volume of 7 per cent. Gulftainer’s UAE terminals recorded a total volume of 3.8 million TEUs in line with the all-round growth in business. The company marked another significant milestone, with the Sharjah Container Terminal (SCT) surpassing 400,000 TEUs in annual throughput for the very first time. Operations at SCT were energised by the positive growth in global trade and the arrival of new services, such as UASC’s Gulf India Service (GIS1), which now connects Sharjah with Sohar in Oman, Mundra in India and Karachi in Pakistan. The addition of this service represented a significant development for Sharjah and boosted the national carrier’s volumes through SCT last year. The only fully fledged operational container terminal in the UAE located outside the Strait of Hormuz, Khorfakkan Container Terminal (KCT) has today emerged as one of the most important transshipment hubs for the Arabian Gulf, the Indian Sub-continent, the Gulf of Oman and the East African markets. Further strengthening the operations at KCT, Gulftainer has received and commissioned new state-of-the-art Ship to Shore (STS) and Rubber Tyred Gantry (RTG) cranes that will further increase overall performance and productivity. This enhanced infrastructure marks an investment of over US$60 million. Gulftainer has set an ambitious target to triple the volume over the next decade through organic growth across existing businesses, exploring green field opportunities and potential M&A activities.

This is a really simple way to provide high-availability with failover and load balancing to any Java backend using JDBC and Spring Boot .

Gulftainer, a privately owned, independent terminal operating and logistics company, marked another significant milestone with the Sharjah Container Terminal (SCT) surpassing 400,000 TEUs (Twenty Foot Equivalent Units) in annual throughput during 2014. SCT has again recorded double-digit growth compared to last year’s volumes. The achievement was reached with an impressive safety record under challenging conditions including space constraints. Iain Rawlinson, Group Commercial Director of Gulftainer said that the professional approach of Gulftainer’s management, along with consistently high productivity levels, was a driving force behind the Terminal’s success. “SCT has always marketed itself as ‘The Flexible Alternative’ and the individual attention we extend to our customers offers us an advantage over competitors.” The 400,000th unit was discharged from Mag Container Lines’ vessel, ‘Mag Success’, one of the Terminal’s regular callers, which considers Sharjah as her base port. Speaking on behalf of Mag Line’s CEO, BDM Jamal Saleh congratulated the Terminal for its achievement. He said: “The announcement today reflects how Gulftainer and MCL have grown together over the years and, in partnership, managed to reach this target. The continuous support, flexibility and excellent operational performance MCL receives from Gulftainer, both operationally and logistically, has contributed greatly to this achievement.” The milestone was achieved on the shift of Duty Superintendent Mehmood Malik, the longest serving employee at over 38 years at the Terminal and part of the team when the first TEU crossed the quay. Mehmood has witnessed several records and milestones and recalls handling 2,500 TEUs in 1976: “At that time we could not imagine reaching the levels of throughput we have today, so this is a very special moment for me.” SCT, which is managed and operated by Gulftainer on behalf of the Sharjah Port Authority, has the honour of being the site of the first container terminal in the Gulf, commenced operations in 1976. SCT is located in the heart of Sharjah and is an ideal gateway for import and export cargo with direct links throughout the Gulf, Asia, Europe, Americas and Africa. The strong performance of the Sharjah economy has supported the growth of many of SCT’s customers, enabling them to increase their throughput and contribute to a record year for the Terminal. The relationships built with our customers have been strengthened by the joint efforts of Gulftainer’s sales and marketing team and the high levels of service and operational efficiency at the terminal, “When looking at the Sharjah market, the dedicated team at SCT listen to and address the many requirements of our diverse and interesting customer base,” said Iain Rawlinson. SCT’s figures have been further boosted with the arrival of new services throughout the year, including UASC’s Gulf India Service (GIS1), which now connects Sharjah with Sohar in Oman, Mundra in India and Karachi in Pakistan, which has boosted in the national carrier’s volumes through SCT in November and December. Gulftainer’s current portfolio covers UAE operations in Khorfakkan Port and Port Khalid in Sharjah as well as activities at Umm Qasr in Iraq, Recife in Brazil, Jeddah and Jubail in Saudi Arabia and in Tripoli Port in Lebanon, which will be operational in April 2016. It also marked another milestone in 2014 with its expansion to the US by signing a long-term agreement to operate the container and multi-cargo terminal at Port Canaveral in Florida. With a current handling activity of over 6 million TEUs, the company has set an ambitious target to triple the volume over the next decade through organic growth across existing businesses, exploring green field opportunities and potential M&A activities.

Learn about how to integrate Apache Camel and Fabric8 into an existing Kubernetes CDI service.

in the previous blog post about solrcloud we’ve talked about the situation when zookeeper connection failed and how solr handles that situation. however, we only talked about query time behavior of solrcloud and we said that we will get back to the topic of indexing in the future. that future is finally here – let’s see what happens to indexing when zookeeper connection is not available. looking back at the old post in the solrcloud – what happens when zookeeper fails? blog post, we’ve shown that solr can handle querying without any issues when connection to zookeeper has been lost (which can be caused by different reasons). of course this is true until we change the cluster topology. unfortunately, in case of indexing or cluster change operations, we can’t change the cluster state or index documents when zookeeper connection is not working or zookeeper failed to read/write the data we want. why we can run queries? the situation is quite simple – querying is not an operation that needs to alter solrcloud cluster state. the only thing solr needs to do is accept the query, run it against known shards/replicas and gather the results. of course cluster topology is not retrieved with each query, so when there is no active zookeeper connection (or zookeeper failed) we don’t have a problem with running queries. there is also one important and not widely know feature of solrcloud – the ability to return partial results. by adding the shards.tolerant=true parameter to our queries we inform solr, that we can live with partial results and it should ignore shards that are not available. this means that solr will return results even if some of the shards from our collection is not available. by default, when this parameter is not present or set to false , solr will just return error when running a query against collection that doesn’t have all the shards available. why we can’t index data? so, we can’t we index data, when zookeeper connection is not available or when zookeeper doesn’t have a quorum? because there is potentially not enough information about the cluster state to process the indexing operation. solr just may not have the fresh information about all the shards, replicas, etc. because of that, indexing operation may be pointed to incorrect shard (like not to the current leader), which can lead to data corruption. and because of that indexing (or cluster change) operation is jus not possible. it is generally worth remembering, that all operations that can lead to cluster state update or collections update won’t be possible when zookeeper quorum is not visible by solr (in our test case, it will be a lack of connectivity of a single zookeeper server). of course, we could leave you with what we wrote above, but let’s check if all that is true. running zookeeper a very simple step. for the purpose of the test we will only need a single zookeeper instance which is run using the following command from zookeeper installation directory: bin/zkserver.sh start we should see the following information on the console: jmx enabled by default using config: /users/gro/solry/zookeeper/bin/../conf/zoo.cfg starting zookeeper ... started and that means that we have a running zookeeper server. starting two solr instances to run the test we’ve used the newest available solr version – the 5.2.1 when this blog post was published. to run two solr instances we’ve used the following command: bin/solr start -e cloud -z localhost:2181 solr asked us a few questions when it was starting and the answers where the following: number of instances: 2 collection name: gettingstarted number of shards: 2 replication count: 1 configuration name: data_driven_schema_configs cluster topology after solr started was as follows: let’s index a few documents to see that solr is really running, we’ve indexed a few documents by running the following command: bin/post -c gettingstarted docs/ if everything went well, after running the following command: curl -xget 'localhost:8983/solr/gettingstarted/select?indent=true&q=*:*&rows=0' we should see solr responding with similar xml: 0 38 *:* true 0 we’ve indexed our documents, we have solr running. let’s stop zookeeper and index data to stop zookeeper server we will just run the following command in the zookeeper installation directory: bin/zkserver.sh stop and now, let’s again try to index our data: bin/post -c gettingstarted docs/ this time, instead of data being written into the collection we will get an error response similar to the following one: posting file index.html (text/html) to [base]/extract simpleposttool: warning: solr returned an error #503 (service unavailable) for url: http://localhost:8983/solr/gettingstarted/update/extract?resource.name=%2fusers%2fgro%2fsolry%2f5.2.1%2fdocs%2findex.html&literal.id=%2fusers%2fgro%2fsolry%2f5.2.1%2fdocs%2findex.html simpleposttool: warning: response: 5033cannot talk to zookeeper - updates are disabled.503 as we can see, the lack of zookeeper connectivity resulted in solr not being able to index data. of course querying still works. turning on zookeeper again and retrying indexing will be successful, because solr will automatically reconnect to zookeeper and will start working again. short summary of course this and the previous blog post related to zookeeper and solrcloud are only touching the surface of what is happening when zookeeper connection is not available. a very good test that shows us data consistency related information can be found at http://lucidworks.com/blog/call-maybe-solrcloud-jepsen-flaky-networks/ . i really recommend it if you would like to know what will happen with solrcloud in various emergency situations.

continuing from my previous post about azure service bus, in this post i will share my learning about queues & messages. the focus of this post will be about some of the undocumented things i found as we implemented support for queues and messages in cloud portam . queues as mentioned in my previous post, queues is the simplest of the azure service bus service and kind of compares with azure storage queue service in the sense that it provides a unidirectional messaging infrastructure where a publisher publishes a message and the message is received by a receiver. there can be many receivers ready to receive the messages however one receiver can only receive a message. no two receivers can receive a single message simultaneously. now some learning about queues. queue name a queue name can be up to 260 characters in length and can contain letters, numbers, periods (.), hyphens (-), and underscores (_) . a queue name is case-insensitive. queue size when creating a queue, you must define the size of the queue. queue size could be one of the following values: 1 gb, 2 gb, 3 gb, 4 gb or 5 gb . a queue size can’t be changed once the queue is created. however if you create a “ partition enabled queue ” then service bus creates 16 partitions thus your queue size is automatically multiplied by 16 and your queue size becomes 16 gb, 32 gb, 48 gb, 64 gb or 80 gb depending on the size you selected (this confused me initially :)). queue properties a service bus queue has many properties. some of the properties can only be set during queue creation time while some of the properties can only be set if you are using “standard” tier of service bus. (above are the screenshots from cloud portam for creating a queue) status indicates the status of a queue – active or disabled . once a queue is disabled, it cannot send or receive messages. max delivery count (maxdeliverycount) indicates the maximum number of times a message can be delivered . once this count has exceeded, message will either be removed from the queue or dead-lettered. the way i understand it is this property is used to manage poison messages. if a message is not processed successfully by receivers for “x” number of times, just move it somewhere else for further inspection or remove it. message time to live (messagettl) indicates a time span for which a message will live inside a queue . if the message is not processed by that time, it will either be removed or dead-lettered. one interesting thing i noticed is that if you’re using “standard” tier, a message could live forever in a queue however in “basic” tier, a message can only live for a maximum of 14 days . lock duration (lockduration) indicates number of seconds for which a message will be locked by a receiver once it receives it so that no other receiver can receive that message . it essentially gives the receiver time to process the message. once this elapses, message will be available to be received by another receiver. maximum value for lock duration can be 5 minutes / 300 seconds . enable partitioning (enablepartitioning) indicates if the queue should be partitioned across multiple message brokers . as mentioned above, service bus automatically creates 16 partitions if this is enabled. this also results in maximum size of the queue increase by a factor of 16. this property can only be set during queue creation time . enable deadlettering (enabledeadlettering) indicates if the messages in the queue should be moved to dead-letter sub queue once they expire. if this property is not set, then the messages will be removed from the queue once they expire. enable batching (enablebatchedoperations) indicates if server-side batched operations are supported. this is used to improve the throughput of a queue as service bus holds the messages for up to 20ms before writing/deleting them in a batch. enable message ordering (supportordering) indicates if the queue supports ordering. requires duplicate detection (requiresduplicatedetection) indicates if the queue requires duplicate detection. this property can only be set during queue creation time and is only available for “standard” tier. enable express (enableexpress) indicates if the queue is an express queue. an express queue holds a message in memory temporarily before writing it to persistent storage. this property can only be set during queue creation time and is only available for “standard” tier. requires session (requiressession) indicates if the queue supports the concept of session. this property can only be set during queue creation time and is only available for “standard” tier. auto delete queue this property specifies a time period after which an idle queue should be deleted automatically by service bus . minimum period allowed is 5 minutes. this can only be set for “standard” tier . duplicate detection history time window (duplicatedetectionhistorytimewindow) defines the duration of the duplicate detection history. this can only be set for “standard” tier . forward messages to queue/topic (forwardto) you can use this property to automatically forward messages from a queue to another queue or topic. when setting this property, the queue/topic must exist in the account. this can only be set for “standard” tier . forward dead-lettered messages to queue/topic (forwarddeadletteredmessagesto) you can use this property to automatically forward dead-lettered message to another queue or topic. when setting this property, the queue/topic must exist in the account. user metadata (usermetadata) you can use this property to define any custom metadata for a queue. following table summarizes property applicability by tier and whether they are editable or not. property tier editable? size basic, standard no status basic, standard yes max delivery count basic, standard yes message time to live basic, standard yes lock duration basic, standard yes enable partitioning basic, standard no enable deadlettering basic, standard yes enable batching basic, standard yes enable message ordering basic, standard yes requires duplicate detection standard no enable express standard no require session standard no auto delete queue standard yes duplicate detection history time window standard yes forward messages to queue/topic standard yes forward dead-lettered messages to queue/topic basic, standard yes user metadata basic, standard yes to learn more about these properties, please see this link: https://msdn.microsoft.com/en-us/library/microsoft.servicebus.messaging.queuedescription.aspx . messages the way i see it, messages are the entities that contain information about the work a sender wants a receiver to do. as mentioned earlier, a sender sends a message to a queue and a receiver will receive the message. at any time, a message will be received by one and only one receiver. message processing there’re two ways by which a receiver will receive a message: peek and lock & receive and delete . peek and lock in peek and lock mode, the message is locked by the receiver for a duration specified by queue’s “ lock duration ” property or in other words under this mode a message is hidden from other receivers for a duration specified by lock duration. the receiver then would process the message and after that a receiver would mark the message as “ complete ” which essentially deletes the message from the queue. if the “lock duration” expires, other receivers will be able to fetch this message. receive and delete in receive and delete mode, once the message is received by a receiver it will be deleted from the queue automatically. if a receiver fails to process that message, then the message is lost forever. so unless you’re sure of receiver’s functionality that it will never fail or you don’t care if the message is processed successfully or not, use this mode cautiously. message composition a message in service bus consists of 3 things – message body, standard properties and custom properties. message body is the actual content of the message. there are some predefined properties of a message and those fall under standard properties. apart from that you can define custom properties on a message which are essentially a collection of name/value pairs. total size of a message is 256 kb. message properties now let’s take a look at some of the standard properties of a message that i found interesting. message id this is the identifier of a message. you can set it at the time of sending a message. because it is an identifier, one would assume that it needs to be unique but that’s not the case. different messages can have same message id. sequence number when a message is created, service bus assigns a number to a message. that number is stored in this property. please note that it is a read-only property. message time to live (message ttl) this is the time period for which a message will remain in the queue. if you recall, you can also define a default message time-to-live at queue level also. service bus actually picks the lower of the two values as message ttl. for example, if you have defined that a message will expire after 14 days at queue level but 5 minutes at the message level then the message will expire after 5 minutes. lock token whenever a message is received by a receiver in “ peek and lock ” mode, service bus returns a (lock) token that must be used to perform further operations (e.g. delete message or dead-letter message etc.) on that message. this token is valid for a duration specified by “ lock duration ” property. after the lock duration expires, the lock token becomes invalid and any attempt to use this token for performing any allowed operations will result in an error. once a lock token expires, a receiver must receive the message again. there are other properties as well which i have not included for the sake of brevity. for a complete list of properties, please see this link: https://msdn.microsoft.com/en-us/library/microsoft.servicebus.messaging.brokeredmessage_properties.aspx . summary that’s it for this post. in the next posts in this series, i will share my learning about topics and other service bus services. so stay tuned for that! again, if you think that i have provided some incorrect information, please let me know and i will fix them asap.

It's a big week with Dockercon going on, and we have some great updates. At the show, we are demoing UrbanCode Build and Deploy build containers, storing them in registries, and deploying them out through test environments and production across hybrid clouds. Check out this quick overview from the team: For a deep dive on any of it, find the guys at the IBM booth at Dockercon. They'll be happy to show you!

In 2015, the middleware world focuses on two buzzwords: Docker and Microservices. Software vendors still sell products such as an Enterprise Service Bus (ESB) or Complex Event Processing (CEP) engines. How is this related? Docker is a fascinating technology to deploy and distribute modules (middleware, applications, services) quickly and easily. Most people agree that Docker will change the future of software development in the next years. I will do another blog post about how Docker is related to TIBCO and how you can deploy and distribute Microservices with Docker and TIBCO products such as TIBCO EMS and BusinessWorks 6 easily. Microservices is NOT a technology, but a software architecture style. Many people say that Microservices kill the Enterprise Service Bus (ESB) because Microservices use smart endpoints and dumb pipes. I had a talk at the Microservices Meetup in Munich in June 2015. Most attendees were surprised, why TIBCO shall be relevant for Microservices. I heard that question in several customer meetings, too. This was the main motivation for this talk. I want to share the slide deck and video recording of the talk with you… Abstract: Why use TIBCO for Microservices? Microservices are the next step after SOA: Services implement a limited set of functions. Services are developed, deployed and scaled independently. Continuous Integration and Continuous Delivery control deployments. This way you get shorter time to results and increased flexibility. Microservices have to be independent regarding build, deployment, data management and business domains. A solid Microservices design requires single responsibility, loose coupling and a decentralized architecture. A Microservice can to be closed or open to partners and public via APIs. This session discusses the requirements, best practices and challenges for creating a good Microservices architecture, and if this spells the end of the Enterprise Service Bus (ESB). Key messages of the talk: Microservices = SOA done right Integration is key for success – the product name does not matter Real time event correlation is the game changer Slide Deck from Microservices Meetup in Munich, Germany Here is the slide deck: Microservices = Death of the Enterprise Service Bus (ESB)? from Kai Wähner Video Recording on Youtube The session was recorded (thanks to the guys from AutoScout24). Here is the Youtube upload: https://youtu.be/wMDHUTmUsKg Looking forward to your feedback… Is the ESB dead or not? If no, what kind of ESB (or better said in 2015: Service Delivery Platform) do you use? If yes, how to you implement “ESB features” in your projects? “Simple” REST services and server-code under the hood, or how else?

This days I’m reading about Microservices. The idea is great. Instead of building a monolithic script using one language/framowork. We create isolated services and we build our application using those services (speaking HTTP between services and application). That’s means we’ll have several microservices and we need to use them, and maybe sometimes change one service with another one. In this post I want to build one small container to handle those microservices. Similar idea than Dependency Injection Containers. As we’re going to speak HTTP, we need a HTTP client. We can build one using curl, but in PHP world we have Guzzle, a great HTTP client library. In fact Guzzle has something similar than the idea of this post: Guzzle services, but I want something more siple. Imagine we have different services: One Silex service (PHP + Silex) use Silex\Application; $app = new Application(); $app->get('/hello/{username}', function($username) { return "Hello {$username} from silex service"; }); $app->run(); Another PHP service. This one using Slim framework use Slim\Slim; $app = new Slim(); $app->get('/hello/:username', function ($username) { echo "Hello {$username} from slim service"; }); $app->run(); And finally one Python service using Flask framework from flask import Flask, jsonify app = Flask(__name__) @app.route('/hello/') def show_user_profile(username): return "Hello %s from flask service" % username if __name__ == "__main__": app.run(debug=True, host='0.0.0.0', port=5000) Now, with our simple container we can use one service or another use Symfony\Component\Config\FileLocator; use MSIC\Loader\YamlFileLoader; use MSIC\Container; $container = new Container(); $ymlLoader = new YamlFileLoader($container, new FileLocator(__DIR__)); $ymlLoader->load('container.yml'); echo $container->getService('flaskServer')->get('/hello/Gonzalo')->getBody() . "\n"; echo $container->getService('silexServer')->get('/hello/Gonzalo')->getBody() . "\n"; echo $container->getService('slimServer')->get('/hello/Gonzalo')->getBody() . "\n"; And that’s all. You can see the project in my github account.

When it comes to teaching or learning, video streaming is something that still frightens people away. As a matter of fact that video chats and webinars have been around for a relatively long time, however; its still hard to encourage an individual or business to take part as such. And yet the benefits of CaptainLive can be substantial in both, short as well as long term. As we have already seen the benefits of video marketing therefore, we want to encourage you to use CaptainLive in order to take advantage of your potential whether it’s hidden in you or you are well aware of it. CaptainLive was launched in early 2015 with a mission to connect people in need of knowledge and skills with Captains with Benefits that are willing to share and give their expertise and mentor skills. CaptainLive’s integrated service now allows for text, video and audio conferencing. It’s been used by a variety of individuals with different backgrounds. At CaptainLive you can schedule an online live video stream with the experts in number topics ranging from counseling up to entertainment. Captains/Experts on the site charges from $5 USD up to $150 USD, most of which offer free 5 minute sessions with no obligation to book their session thereafter. Who knows you might end up registering as Captain yourself and start a part time business of your own to help others with your skills while making a healthy stream of income for yourself, it’s surely well worth your effort.

LANDESK One Partnership Brings WinMagic's Encryption and Intelligent Key Management Solution, SecureDoc, to LANDESK Customers LONDON - 01 July, 2015 - LANDESK today announced it has certified and is now reselling WinMagic's suite of SecureDoc products as part of its LANDESK One Partner program. The integration between LANDESK Management Suite and WinMagic SecureDoc brings the encryption status of the organisation's devices into the LANDESK management database. Given the seemingly endless news of high-profile data theft, LANDESK's relationship with WinMagic, the global innovator in key management and full disk encryption, bolsters the LANDESK security management software portfolio by allowing customers to protect data at rest. This partnership allows system administrators and security professionals to utilise a single tool for querying and reporting on encryption status alongside any other hardware or software attribute, streamlining the visibility necessary to ensure the safety and security of the organisation's assets. "The partnership between LANDESK and WinMagic allows LANDESK customers to better utilize WinMagic's world-class encryption capabilities," said Steve Workman, vice president of strategy at LANDESK. "WinMagic's SecureDoc broadens and enriches LANDESK's security portfolio, giving users the peace of mind so they can do what they do best. WinMagic's approach to full disk encryption (FDE) was a main impetus for our partnership." WinMagic's SecureDoc encrypts data on various devices, closely manages encryption keys and enables seamless user authentication and data access, so encryption does not inhibit productivity. SecureDoc protects data on the endpoint, where the data is created, regardless of the device or platform where it's accessed or saved. By deploying WinMagic's SecureDoc as LANDESK's recommended FDE vendor and integrating SecureDoc reporting into the LANDESK console, LANDESK customers receive the following: Encryption transparency. SecureDoc reports on which devices are encrypted as part of LANDESK's comprehensive compliance reporting features, aiding in regulatory compliance. A single console view. This view that encompasses all endpoint security and encryption across all devices and all operating systems. It does all of this with transparent intelligent key management, allowing users to gain deep insight into their security. FDE technology. Being application-aware, WinMagic solutions not only manage the keys but also the related policy and configuration for endpoint encryption. A predefined integration between the companies' products has been certified and is immediately available to LANDESK customers who use WinMagic. LANDESK customers who do not have WinMagic can now contact their LANDESK representative to begin evaluating how WinMagic can improve their security. "LANDESK and WinMagic agree that managing security at the endpoint is vital to protecting sensitive data and ensuring compliance, and WinMagic's offering integrates seamlessly into LANDESK's suite of solutions," said Mark Hickman, COO of WinMagic. "With this partnership, WinMagic has earned the endorsement of LANDESK, a systems and security management software company trusted by numerous companies in many industries. It's a testament to the proven and widely deployed WinMagic solution." LANDESK One Partners provide solution integrations that support the LANDESK vision of user-centered service management and help customers tackle their most pressing issues and gain maximum value from their technology investments. For more information visit: www.landesk.com/partners/landesk-one.