H2 as a memory database for Spring-based applications is lightweight, easy to use, and emulates other RDBMS with the help of JPA and Hibernate.

In this article, excerpted from the book Docker in Action, I will show you how to open access to shared memory between containers. Linux provides a few tools for sharing memory between processes running on the same computer. This form of inter-process communication (IPC) performs at memory speeds. It is often used when the latency associated with network or pipe based IPC drags software performance below requirements. The best examples of shared memory based IPC usage is in scientific computing and some popular database technologies like PostgreSQL. Docker creates a unique IPC namespace for each container by default. The Linux IPC namespace partitions shared memory primitives like named shared memory blocks and semaphores, as well as message queues. It is okay if you are not sure what these are. Just know that they are tools used by Linux programs to coordinate processing. The IPC namespace prevents processes in one container from accessing the memory on the host or in other containers. Sharing IPC Primitives Between Containers I’ve created an image named allingeek/ch6_ipc that contains both a producer and consumer. They communicate using shared memory. Listing 1 will help you understand the problem with running these in separate containers. Listing 1: Launch a Communicating Pair of Programs # start a producer docker -d -u nobody --name ch6_ipc_producer \ allingeek/ch6_ipc -producer # start the consumer docker -d -u nobody --name ch6_ipc_consumer \ allingeek/ch6_ipc -consumer Listing 1 starts two containers. The first creates a message queue and starts broadcasting messages on it. The second should pull from the message queue and write the messages to the logs. You can see what each is doing by using the following commands to inspect the logs of each: docker logs ch6_ipc_producer docker logs ch6_ipc_consumer If you executed the commands in Listing 1 something should be wrong. The consumer never sees any messages on the queue. Each process used the same key to identify the shared memory resource but they referred to different memory. The reason is that each container has its own shared memory namespace. If you need to run programs that communicate with shared memory in different containers, then you will need to join their IPC namespaces with the --ipc flag. The --ipc flag has a container mode that will create a new container in the same IPC namespace as another target container. Listing 2: Joining Shared Memory Namespaces # remove the original consumer docker rm -v ch6_ipc_consumer # start a new consumer with a joined IPC namespace docker -d --name ch6_ipc_consumer \ --ipc container:ch6_ipc_producer \ allingeek/ch6_ipc -consumer Listing 2 rebuilds the consumer container and reuses the IPC namespace of the ch6_ipc_producer container. This time the consumer should be able to access the same memory location where the server is writing. You can see this working by using the following commands to inspect the logs of each: docker logs ch6_ipc_producer docker logs ch6_ipc_consumer Remember to cleanup your running containers before moving on: # remember: the v option will clean up volumes, # the f option will kill the container if it is running, # and the rm command takes a list of containers docker rm -vf ch6_ipc_producer ch6_ipc_consumer There are obvious security implications to reusing the shared memory namespaces of containers. But this option is available if you need it. Sharing memory between containers is safer alternative to sharing memory with the host.

Get a crash course in understanding microservices and the difficulties in implementing them.

[This article was written by Sveta Smirnova] Like any good, thus lazy, engineer I don’t like to start things manually. Creating directories, configuration files, specify paths, ports via command line is too boring. I wrote already how I survive in case when I need to start MySQL server (here). There is also the MySQL Sandbox which can be used for the same purpose. But what to do if you want to start Percona XtraDB Cluster this way? Fortunately we, at Percona, have engineers who created automation solution for starting PXC. This solution uses Docker. To explore it you need: Clone the pxc-docker repository:git clone https://github.com/percona/pxc-docker Install Docker Compose as described here cd pxc-docker/docker-bld Follow instructions from the README file: a) ./docker-gen.sh 5.6 (docker-gen.sh takes a PXC branch as argument, 5.6 is default, and it looks for it on github.com/percona/percona-xtradb-cluster) b) Optional: docker-compose build (if you see it is not updating with changes). c) docker-compose scale bootstrap=1 members=2 for a 3 node cluster Check which ports assigned to containers: $docker port dockerbld_bootstrap_1 3306 0.0.0.0:32768 $docker port dockerbld_members_1 4567 0.0.0.0:32772 $docker port dockerbld_members_2 4568 0.0.0.0:32776 Now you can connect to MySQL clients as usual: $mysql -h 0.0.0.0 -P 32768 -uroot Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 10 Server version: 5.6.21-70.1 MySQL Community Server (GPL), wsrep_25.8.rXXXX Copyright (c) 2009-2015 Percona LLC and/or its affiliates Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or 'h' for help. Type 'c' to clear the current input statement. mysql> 6. To change MySQL options either pass it as a mount at runtime with something like volume: /tmp/my.cnf:/etc/my.cnf in docker-compose.yml or connect to container’s bash (docker exec -i -t container_name /bin/bash), then change my.cnf and run docker restart container_name Notes. If you don’t want to build use ready-to-use images If you don’t want to run Docker Compose as root user add yourself to docker group

A new book looks at how DevOps affects architectural decisions, and a software architect’s role in DevOps.

written by tim brock. scatter plots are a wonderful way of showing ( apparent ) relationships in bivariate data. patterns and clusters that you wouldn't see in a huge block of data in a table can become instantly visible on a page or screen. with all the hype around big data in recent years it's easy to assume that having more data is always an advantage. but as we add more and more data points to a scatter plot we can start to lose these patterns and clusters. this problem, a result of overplotting, is demonstrated in the animation below. the data in the animation above is randomly generated from a pair of simple bivariate distributions. the distinction between the two distributions becomes less and less clear as we add more and more data. so what can we do about overplotting? one simple option is to make the data points smaller. (note this is a poor "solution" if many data points share exactly the same values.) we can also make them semi-transparent. and we can combine these two options: these refinements certainly help when we have ten thousand data points. however, by the time we've reached a million points the two distributions have seemingly merged in to one again. making points smaller and more transparent might help things; nevertheless, at some point we may have to consider a change of visualization. we'll get on to that later. but first let's try to supplement our visualization with some extra information. specifically let's visualize the marginal distributions . we have several options. there's far too much data for a rug plot , but we can bin the data and show histograms . or we can use a smoother option - a kernel density plot . finally, we could use the empirical cumulative distribution . this last option avoids any binning or smoothing but the results are probably less intuitive. i'll go with the kernel density option here, but you might prefer a histogram. the animated gif below is the same as the gif above but with the smoothed marginal distributions added. i've left scales off to avoid clutter and because we're only really interested in rough judgements of relative height. adding marginal distributions, particularly the distribution of variable 2, helps clarify that two different distributions are present in the bivariate data. the twin-peaked nature of variable 2 is evident whether there are a thousand data points or a million. the relative sizes of the two components is also clear. by contrast, the marginal distribution of variable 1 only has a single peak, despite coming from two distinct distributions. this should make it clear that adding marginal distributions is by no means a universal solution to overplotting in scatter plots. to reinforce this point, the animation below shows a completely different set of (generated) data points in a scatter plot with marginal distributions. the data again comes from a random sample of two different 2d distributions, but both marginal distributions of the complete dataset fail to highlight this separation. as previously, when the number of data points is large the distinction between the two clusters can't be seen from the scatter plot either. returning to point size and opacity, what do we get if we make the data points very small and almost completely transparent? we can now clearly distinguish two clusters in each dataset. it's difficult to make out any fine detail though. since we've lost that fine detail anyway, it seems apt to question whether we really want to draw a million data points. it can be tediously slow and impossible in certain contexts. 2d histograms are an alternative. by binning data we can reduce the number of points to plot and, if we pick an appropriate color scale, pick out some of the features that were lost in the clutter of the scatter plot. after some experimenting i picked a color scale that ran from black through green to white at the high end. note, this is (almost) the reverse of the effect created by overplotting in the scatter plots above. in both 2d histograms we can clearly see the two different clusters representing the two distributions from which the data is drawn. in the first case we can also see that there are more counts from the upper-left cluster than the bottom-right cluster, a detail that is lost in the scatter plot with a million data points (but more obvious from the marginal distributions). conversely, in the case of the second dataset we can see that the "heights" of the two clusters are roughly comparable. 3d charts are overused, but here (see below) i think they actually work quite well in terms of providing a broad picture of where the data is and isn't concentrated. feature occlusion is a problem with 3d charts so if you're going to go down this route when exploring your own data i highly recommend using software that allows for user interaction through rotation and zooming. in summary, scatter plots are a simple and often effective way of visualizing bivariate data. if, however, your chart suffers from overplotting, try reducing point size and opacity. failing that, a 2d histogram or even a 3d surface plot may be helpful. in the latter case be wary of occlusion.

This is a really simple way to provide high-availability with failover and load balancing to any Java backend using JDBC and Spring Boot .

Learn about how to integrate Apache Camel and Fabric8 into an existing Kubernetes CDI service.

in the previous blog post about solrcloud we’ve talked about the situation when zookeeper connection failed and how solr handles that situation. however, we only talked about query time behavior of solrcloud and we said that we will get back to the topic of indexing in the future. that future is finally here – let’s see what happens to indexing when zookeeper connection is not available. looking back at the old post in the solrcloud – what happens when zookeeper fails? blog post, we’ve shown that solr can handle querying without any issues when connection to zookeeper has been lost (which can be caused by different reasons). of course this is true until we change the cluster topology. unfortunately, in case of indexing or cluster change operations, we can’t change the cluster state or index documents when zookeeper connection is not working or zookeeper failed to read/write the data we want. why we can run queries? the situation is quite simple – querying is not an operation that needs to alter solrcloud cluster state. the only thing solr needs to do is accept the query, run it against known shards/replicas and gather the results. of course cluster topology is not retrieved with each query, so when there is no active zookeeper connection (or zookeeper failed) we don’t have a problem with running queries. there is also one important and not widely know feature of solrcloud – the ability to return partial results. by adding the shards.tolerant=true parameter to our queries we inform solr, that we can live with partial results and it should ignore shards that are not available. this means that solr will return results even if some of the shards from our collection is not available. by default, when this parameter is not present or set to false , solr will just return error when running a query against collection that doesn’t have all the shards available. why we can’t index data? so, we can’t we index data, when zookeeper connection is not available or when zookeeper doesn’t have a quorum? because there is potentially not enough information about the cluster state to process the indexing operation. solr just may not have the fresh information about all the shards, replicas, etc. because of that, indexing operation may be pointed to incorrect shard (like not to the current leader), which can lead to data corruption. and because of that indexing (or cluster change) operation is jus not possible. it is generally worth remembering, that all operations that can lead to cluster state update or collections update won’t be possible when zookeeper quorum is not visible by solr (in our test case, it will be a lack of connectivity of a single zookeeper server). of course, we could leave you with what we wrote above, but let’s check if all that is true. running zookeeper a very simple step. for the purpose of the test we will only need a single zookeeper instance which is run using the following command from zookeeper installation directory: bin/zkserver.sh start we should see the following information on the console: jmx enabled by default using config: /users/gro/solry/zookeeper/bin/../conf/zoo.cfg starting zookeeper ... started and that means that we have a running zookeeper server. starting two solr instances to run the test we’ve used the newest available solr version – the 5.2.1 when this blog post was published. to run two solr instances we’ve used the following command: bin/solr start -e cloud -z localhost:2181 solr asked us a few questions when it was starting and the answers where the following: number of instances: 2 collection name: gettingstarted number of shards: 2 replication count: 1 configuration name: data_driven_schema_configs cluster topology after solr started was as follows: let’s index a few documents to see that solr is really running, we’ve indexed a few documents by running the following command: bin/post -c gettingstarted docs/ if everything went well, after running the following command: curl -xget 'localhost:8983/solr/gettingstarted/select?indent=true&q=*:*&rows=0' we should see solr responding with similar xml: 0 38 *:* true 0 we’ve indexed our documents, we have solr running. let’s stop zookeeper and index data to stop zookeeper server we will just run the following command in the zookeeper installation directory: bin/zkserver.sh stop and now, let’s again try to index our data: bin/post -c gettingstarted docs/ this time, instead of data being written into the collection we will get an error response similar to the following one: posting file index.html (text/html) to [base]/extract simpleposttool: warning: solr returned an error #503 (service unavailable) for url: http://localhost:8983/solr/gettingstarted/update/extract?resource.name=%2fusers%2fgro%2fsolry%2f5.2.1%2fdocs%2findex.html&literal.id=%2fusers%2fgro%2fsolry%2f5.2.1%2fdocs%2findex.html simpleposttool: warning: response: 5033cannot talk to zookeeper - updates are disabled.503 as we can see, the lack of zookeeper connectivity resulted in solr not being able to index data. of course querying still works. turning on zookeeper again and retrying indexing will be successful, because solr will automatically reconnect to zookeeper and will start working again. short summary of course this and the previous blog post related to zookeeper and solrcloud are only touching the surface of what is happening when zookeeper connection is not available. a very good test that shows us data consistency related information can be found at http://lucidworks.com/blog/call-maybe-solrcloud-jepsen-flaky-networks/ . i really recommend it if you would like to know what will happen with solrcloud in various emergency situations.

In 2015, the middleware world focuses on two buzzwords: Docker and Microservices. Software vendors still sell products such as an Enterprise Service Bus (ESB) or Complex Event Processing (CEP) engines. How is this related? Docker is a fascinating technology to deploy and distribute modules (middleware, applications, services) quickly and easily. Most people agree that Docker will change the future of software development in the next years. I will do another blog post about how Docker is related to TIBCO and how you can deploy and distribute Microservices with Docker and TIBCO products such as TIBCO EMS and BusinessWorks 6 easily. Microservices is NOT a technology, but a software architecture style. Many people say that Microservices kill the Enterprise Service Bus (ESB) because Microservices use smart endpoints and dumb pipes. I had a talk at the Microservices Meetup in Munich in June 2015. Most attendees were surprised, why TIBCO shall be relevant for Microservices. I heard that question in several customer meetings, too. This was the main motivation for this talk. I want to share the slide deck and video recording of the talk with you… Abstract: Why use TIBCO for Microservices? Microservices are the next step after SOA: Services implement a limited set of functions. Services are developed, deployed and scaled independently. Continuous Integration and Continuous Delivery control deployments. This way you get shorter time to results and increased flexibility. Microservices have to be independent regarding build, deployment, data management and business domains. A solid Microservices design requires single responsibility, loose coupling and a decentralized architecture. A Microservice can to be closed or open to partners and public via APIs. This session discusses the requirements, best practices and challenges for creating a good Microservices architecture, and if this spells the end of the Enterprise Service Bus (ESB). Key messages of the talk: Microservices = SOA done right Integration is key for success – the product name does not matter Real time event correlation is the game changer Slide Deck from Microservices Meetup in Munich, Germany Here is the slide deck: Microservices = Death of the Enterprise Service Bus (ESB)? from Kai Wähner Video Recording on Youtube The session was recorded (thanks to the guys from AutoScout24). Here is the Youtube upload: https://youtu.be/wMDHUTmUsKg Looking forward to your feedback… Is the ESB dead or not? If no, what kind of ESB (or better said in 2015: Service Delivery Platform) do you use? If yes, how to you implement “ESB features” in your projects? “Simple” REST services and server-code under the hood, or how else?

It's a big week with Dockercon going on, and we have some great updates. At the show, we are demoing UrbanCode Build and Deploy build containers, storing them in registries, and deploying them out through test environments and production across hybrid clouds. Check out this quick overview from the team: For a deep dive on any of it, find the guys at the IBM booth at Dockercon. They'll be happy to show you!

This days I’m reading about Microservices. The idea is great. Instead of building a monolithic script using one language/framowork. We create isolated services and we build our application using those services (speaking HTTP between services and application). That’s means we’ll have several microservices and we need to use them, and maybe sometimes change one service with another one. In this post I want to build one small container to handle those microservices. Similar idea than Dependency Injection Containers. As we’re going to speak HTTP, we need a HTTP client. We can build one using curl, but in PHP world we have Guzzle, a great HTTP client library. In fact Guzzle has something similar than the idea of this post: Guzzle services, but I want something more siple. Imagine we have different services: One Silex service (PHP + Silex) use Silex\Application; $app = new Application(); $app->get('/hello/{username}', function($username) { return "Hello {$username} from silex service"; }); $app->run(); Another PHP service. This one using Slim framework use Slim\Slim; $app = new Slim(); $app->get('/hello/:username', function ($username) { echo "Hello {$username} from slim service"; }); $app->run(); And finally one Python service using Flask framework from flask import Flask, jsonify app = Flask(__name__) @app.route('/hello/') def show_user_profile(username): return "Hello %s from flask service" % username if __name__ == "__main__": app.run(debug=True, host='0.0.0.0', port=5000) Now, with our simple container we can use one service or another use Symfony\Component\Config\FileLocator; use MSIC\Loader\YamlFileLoader; use MSIC\Container; $container = new Container(); $ymlLoader = new YamlFileLoader($container, new FileLocator(__DIR__)); $ymlLoader->load('container.yml'); echo $container->getService('flaskServer')->get('/hello/Gonzalo')->getBody() . "\n"; echo $container->getService('silexServer')->get('/hello/Gonzalo')->getBody() . "\n"; echo $container->getService('slimServer')->get('/hello/Gonzalo')->getBody() . "\n"; And that’s all. You can see the project in my github account.

Continuing my Spring-Cloud learning journey, earlier I had covered how to write the infrastructure components of a typical Spring-Cloud and Netflix OSS based micro-services environment - in this specific instance two critical components, Eureka to register and discover services and Spring Cloud Configuration to maintain a centralized repository of configuration for a service. Here I will be showing how I developed two dummy micro-services, one a simple "pong" service and a "ping" service which uses the "pong" service. Sample-Pong microservice The endpoint handling the "ping" requests is a typical Spring MVC based endpoint: @RestController public class PongController { @Value("${reply.message}") private String message; @RequestMapping(value = "/message", method = RequestMethod.POST) public Resource pongMessage(@RequestBody Message input) { return new Resource<>( new MessageAcknowledgement(input.getId(), input.getPayload(), message)); } } It gets a message and responds with an acknowledgement. Here the service utilizes the Configuration server in sourcing the "reply.message" property. So how does the "pong" service find the configuration server, there are potentially two ways - directly by specifying the location of the configuration server, or by finding the Configuration server via Eureka. I am used to an approach where Eureka is considered a source of truth, so in this spirit I am using Eureka to find the Configuration server. Spring Cloud makes this entire flow very simple, all it requires is a "bootstrap.yml" property file with entries along these lines: --- spring: application: name: sample-pong cloud: config: discovery: enabled: true serviceId: SAMPLE-CONFIG eureka: instance: nonSecurePort: ${server.port:8082} client: serviceUrl: defaultZone: http://${eureka.host:localhost}:${eureka.port:8761}/eureka/ The location of Eureka is specified through the "eureka.client.serviceUrl" property and the "spring.cloud.config.discovery.enabled" is set to "true" to specify that the configuration server is discovered via the specified Eureka server. Just a note, this means that the Eureka and the Configuration server have to be completely up before trying to bring up the actual services, they are the pre-requisites and the underlying assumption is that the Infrastructure components are available at the application boot time. The Configuration server has the properties for the "sample-pong" service, this can be validated by using the Config-servers endpoint - http://localhost:8888/sample-pong/default, 8888 is the port where I had specified for the server endpoint, and should respond with a content along these lines: "name": "sample-pong", "profiles": [ "default" ], "label": "master", "propertySources": [ { "name": "classpath:/config/sample-pong.yml", "source": { "reply.message": "Pong" } } ] } As can be seen the "reply.message" property from this central configuration server will be used by the pong service as the acknowledgement message Now to set up this endpoint as a service, all that is required is a Spring-boot based entry point along these lines: @SpringBootApplication @EnableDiscoveryClient public class PongApplication { public static void main(String[] args) { SpringApplication.run(PongApplication.class, args); } } and that completes the code for the "pong" service. Sample-ping micro-service So now onto a consumer of the "pong" micro-service, very imaginatively named the "ping" micro-service. Spring-Cloud and Netflix OSS offer a lot of options to invoke endpoints on Eureka registered services, to summarize the options that I had: 1. Use raw Eureka DiscoveryClient to find the instances hosting a service and make calls using Spring's RestTemplate. 2. Use Ribbon, a client side load balancing solution which can use Eureka to find service instances 3. Use Feign, which provides a declarative way to invoke a service call. It internally uses Ribbon. I went with Feign. All that is required is an interface which shows the contract to invoke the service: package org.bk.consumer.feign; import org.bk.consumer.domain.Message; import org.bk.consumer.domain.MessageAcknowledgement; import org.springframework.cloud.netflix.feign.FeignClient; import org.springframework.http.MediaType; import org.springframework.web.bind.annotation.RequestBody; import org.springframework.web.bind.annotation.RequestMapping; import org.springframework.web.bind.annotation.RequestMethod; import org.springframework.web.bind.annotation.ResponseBody; @FeignClient("samplepong") public interface PongClient { @RequestMapping(method = RequestMethod.POST, value = "/message", produces = MediaType.APPLICATION_JSON_VALUE, consumes = MediaType.APPLICATION_JSON_VALUE) @ResponseBody MessageAcknowledgement sendMessage(@RequestBody Message message); } The annotation @FeignClient("samplepong") internally points to a Ribbon "named" client called "samplepong". This means that there has to be an entry in the property files for this named client, in my case I have these entries in my application.yml file: samplepong: ribbon: DeploymentContextBasedVipAddresses: sample-pong NIWSServerListClassName: com.netflix.niws.loadbalancer.DiscoveryEnabledNIWSServerList ReadTimeout: 5000 MaxAutoRetries: 2 The most important entry here is the "samplepong.ribbon.DeploymentContextBasedVipAddresses" which points to the "pong" services Eureka registration address using which the service instance will be discovered by Ribbon. The rest of the application is a routine Spring Boot application. I have exposed this service call behind Hystrix which guards against service call failures and essentially wraps around this FeignClient: package org.bk.consumer.service; import com.netflix.hystrix.contrib.javanica.annotation.HystrixCommand; import org.bk.consumer.domain.Message; import org.bk.consumer.domain.MessageAcknowledgement; import org.bk.consumer.feign.PongClient; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.beans.factory.annotation.Qualifier; import org.springframework.stereotype.Service; @Service("hystrixPongClient") public class HystrixWrappedPongClient implements PongClient { @Autowired @Qualifier("pongClient") private PongClient feignPongClient; @Override @HystrixCommand(fallbackMethod = "fallBackCall") public MessageAcknowledgement sendMessage(Message message) { return this.feignPongClient.sendMessage(message); } public MessageAcknowledgement fallBackCall(Message message) { MessageAcknowledgement fallback = new MessageAcknowledgement(message.getId(), message.getPayload(), "FAILED SERVICE CALL! - FALLING BACK"); return fallback; } } Boot"ing up I have dockerized my entire set-up, so the simplest way to start up the set of applications is to first build the docker images for all of the artifacts this way: mvn clean package docker:build -DskipTests and bring all of them up using the following command, the assumption being that both docker and docker-compose are available locally: docker-compose up Assuming everything comes up cleanly, Eureka should show all the registered services, at http://dockerhost:8761 url - The UI of the ping application should be available at http://dockerhost:8080 url - Additionally a Hystrix dashboard should be available to monitor the requests to the "pong" app at this url http://dockerhost:8989/hystrix/monitor?stream=http%3A%2F%2Fsampleping%3A8080%2Fhystrix.stream: References 1. The code is available at my github location - https://github.com/bijukunjummen/spring-cloud-ping-pong-sample 2. Most of the code is heavily borrowed from the spring-cloud-samples repository - https://github.com/spring-cloud-samples

[This article was written by Alex Harford.] Docker APIs are a convenient way for your systems to talk to Docker infrastructure. But sometimes there are challenges associated with them. I've outlined in this blog the steps you need to take and the items you need to look out for when working with Docker APIs. Initial Docker Setup Ensure you have the latest Docker client installed. It should be v1.6 or newer. [alexh:~/work] docker pull ubuntu latest: Pulling from ubuntu 428b411c28f0: Pull complete 435050075b3f: Pull complete 9fd3c8c9af32: Pull complete 6d4946999d4f: Already exists ubuntu:latest: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security. Digest: sha256:45e42b43f2ff4850dcf52960ee89c21cda79ec657302d36faaaa07d880215dd9 Status: Downloaded newer image for ubuntu:latest [alexh:~/work] docker run -ti ubuntu /bin/bash root@1092e8ca2ead:/# ps PID TTY TIME CMD 1 ? 00:00:00 bash 14 ? 00:00:00 ps root@1092e8ca2ead:/# exit exit Daemons, Registries, Hubs The Docker registry is used to host docker images for download. In the most simple case, it can be a process serving static images. This would be a read-only registry supporting GET operations only. If you need something more complex, you need to use a Docker registry web service. You can [a target="_blank" href="http://www.activestate.com/blog/2014/01/deploying-your-own-private-docker-registry"]run your own private Docker registry or use the public official Docker Hub. The Docker Hub contains a Docker registry, but also includes other features, like user authentication. In our examples, we will run an unauthenticated Docker registry. Setup If you are using standard Docker images, most people will pull from the Docker Hub, which is a publically accessible Docker registry. However, a more complicated service may be talking to private Docker registries running different versions of the API. Let’s assemble a test environment with both versions of the docker registry API so we can see the different ways you can access it. First, pull down two versions of the docker registry from the Docker Hub: docker pull registry:0.9.1 0.9.1: Pulling from registry e9e06b06e14c: Pull complete a82efea989f9: Pull complete 37bea4ee0c81: Pull complete 07f8e8c5e660: Pull complete 1f4ab7282e19: Pull complete 3c27027cdae8: Pull complete 7e0e5314436e: Pull complete 2696504d3685: Pull complete 012772dbb1c6: Pull complete e24d9fce1d00: Pull complete fd2726a79da8: Pull complete bffc32d7113a: Pull complete 0cd49aa0e23c: Pull complete 4e698fa80441: Already exists registry:0.9.1: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security. Digest: sha256:98937757728eecbd72c9276bf711260aa29896f15217ce05be0562287e73232d Status: Downloaded newer image for registry:0.9.1 [alexh:~/work] docker pull registry:2.0.1 2.0.1: Pulling from registry 39bb80489af7: Pull complete df2a0347c9d0: Pull complete 7a3871ba15f8: Pull complete a2703ed272d7: Pull complete 68769176e114: Pull complete ab2ab59d7d1b: Pull complete 882ecee9f360: Pull complete 40de65f8e79f: Pull complete 0c4f9c7d798f: Pull complete ca29675fe853: Pull complete 89d10e9463e5: Pull complete 1a5aa415e484: Pull complete 3ea7a9e93b04: Pull complete 769d811a57fd: Pull complete ae8a4a3af1aa: Pull complete 85cc9a791bb5: Pull complete 9cd2c8646022: Pull complete 048c32c549b9: Pull complete cbbbda28c189: Pull complete 2602c005e534: Pull complete 136beb445cfa: Pull complete 0c5e5ef1d7da: Already exists registry:2.0.1: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security. Digest: sha256:0cd177d687589aff586aa2c66c64d1c25657b8d09cff9e1492192f496e7786c3 Status: Downloaded newer image for registry:2.0.1 The next step is to start them. We will start the v1 registry on port 5000, and the v2 registry on port 6000. The v1 registry occasionally fails when starting due to a lock file race condition, so tell it to restart if necessary. [alexh:~/work] docker run -p 5000:5000 -d --restart=on-failure:3 registry:0.9.1 896c651b9bfa9780b14e3710d20428baab8497c30b9bc89946b192e1d1c145aa [alexh:~/work] docker run -p 6000:5000 -d registry:2.0.1 e09d4204921c732879ee9b7544cd40a25275e0d1f1702cacd954412cfd586ffb [alexh:~/work] docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES e09d4204921c registry:2.0.1 "registry cmd/regist 4 seconds ago Up 3 seconds 0.0.0.0:6000->5000/tcp silly_albattani 896c651b9bfa registry:0.9.1 "docker-registry" 35 seconds ago Up 34 seconds 0.0.0.0:5000->5000/tcp jovial_leakey Understanding Docker Namespaces Docker has a concept of namespaces for its repositories which can be confusing. [a target="_blank" href="https://docs.docker.com/docker-hub/official_repos/"]Official Repositories can be referred to without a username prefix: CentOS Ubuntu Internally these are prefixed by library/. This means that command like docker pull ubuntu:15.10 and docker pull library/ubuntu:15.10 are equivalent. If the name includes a '/' character (samalba/docker-registry), the left side refers to the username, and the right side refers to the image name in their public repository. It gets more complex when accessing private registries. The format becomes HOST:PORT/[USERNAME/]IMAGE. However, you should note that there is no authentication performed at this layer of our docker registry environment: anyone can push, pull, or delete from any 'user'. If the USERNAME is omitted, it is internally treated as being an 'official' image, and prefixed with library/. docker pull 127.0.0.1:5000/library/test-ubuntu Pulling repository 127.0.0.1:5000/library/test-ubuntu FATA[0004] Error: image library/test-ubuntu:latest not found [alexh:~/work] docker tag 0fe5a10d2cf8 127.0.0.1:5000/test-ubuntu [alexh:~/work] docker push 127.0.0.1:5000/test-ubuntu The push refers to a repository [127.0.0.1:5000/test-ubuntu] (len: 1) Sending image list Pushing repository 127.0.0.1:5000/test-ubuntu (1 tags) Image 5c1d0c04c3b8 already pushed, skipping Image 8c63e4ac9a5f already pushed, skipping Image 5fc05c0feaea already pushed, skipping Image 0fe5a10d2cf8 already pushed, skipping Pushing tag for rev [0fe5a10d2cf8] on {http://127.0.0.1:5000/v1/repositories/test-ubuntu/tags/latest} [alexh:~/work] docker pull 127.0.0.1:5000/library/test-ubuntu Pulling repository 127.0.0.1:5000/library/test-ubuntu 0fe5a10d2cf8: Download complete 5c1d0c04c3b8: Download complete 8c63e4ac9a5f: Download complete 5fc05c0feaea: Download complete Status: Image is up to date for 127.0.0.1:5000/library/test-ubuntu:latest In the v2 Docker registry, the [a target="_blank" href="https://docs.docker.com/registry/spec/api/#overview"]URI scheme has changed to allow the repository name to be broken up into multiple components. However, the Docker client does not yet support this flexibility. In the future, you should be able to extend the namespace of your registries, ie `redhat/centos/beta or redhat/fedora/stable. Populating the Registries We'll use Ubuntu 15.10 as our example image: docker pull ubuntu:15.10 15.10: Pulling from ubuntu 5c1d0c04c3b8: Pull complete 8c63e4ac9a5f: Pull complete 5fc05c0feaea: Pull complete 0fe5a10d2cf8: Already exists ubuntu:15.10: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security. Digest: sha256:d569b6ebfc62f35f9792392724bd4a74a4f5f5af10ccbc1880974ae2f0660898 Status: Downloaded newer image for ubuntu:15.10 It needs to be tagged with the new URL in order to push it to the private registries: [alexh:~/work] docker tag ubuntu:15.10 127.0.0.1:5000/ubuntu:15.10 [alexh:~/work] docker tag ubuntu:15.10 127.0.0.1:6000/ubuntu:15.10 [alexh:~/work] docker push 127.0.0.1:5000/ubuntu:15.10 The push refers to a repository [127.0.0.1:5000/ubuntu] (len: 1) Sending image list Pushing repository 127.0.0.1:5000/ubuntu (1 tags) 5c1d0c04c3b8: Image successfully pushed 8c63e4ac9a5f: Image successfully pushed 5fc05c0feaea: Image successfully pushed 0fe5a10d2cf8: Image successfully pushed Pushing tag for rev [0fe5a10d2cf8] on {http://127.0.0.1:5000/v1/repositories/ubuntu/tags/15.10} [alexh:~/work] docker push 127.0.0.1:6000/ubuntu:15.10 The push refers to a repository [127.0.0.1:6000/ubuntu] (len: 1) 0fe5a10d2cf8: Image already exists 5fc05c0feaea: Image successfully pushed 8c63e4ac9a5f: Image successfully pushed 5c1d0c04c3b8: Image successfully pushed Digest: sha256:1f93077ce8f2fa1da8aae87735f395eae93a1c21928d3e2d130717c9aeff177d Note that the output between the v1 registry (on port 5000) and v2 (port 6000) are slightly different, but the result is the same: the Ubuntu image is now available on each registry. Docker Registry APIs At this point, we're able to compare the different APIs. In April 2015, Docker [a target="_blank" href="http://docs.docker.com/v1.6/release-notes/"]released version 1.6 and this included v2 of the Registry. Your software should be aware of the different versions of the Docker Registry API to handle these differences. Let's look at what it takes to download the image layers through the various APIs in order to make an offline cache. First, we'll prepare our environment: [alexh:~/work] export image=ubuntu [alexh:~/work] export tag=15.10 v1 The v1 private registry can be examined at this point: [alexh:~/work] curl -s http://127.0.0.1:5000/v1/repositories/library/$image/tags/$tag | python -m json.tool "0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547" export v1_image_id=`curl -s http://127.0.0.1:5000/v1/repositories/library/$image/tags/$tag | sed 's/"//g'` [alexh:~/work] curl -s http://127.0.0.1:5000/v1/images/$v1_image_id/ancestry | python -m json.tool [ "0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547", "5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1", "8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824", "5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73" ] [alexh:~/work] curl -sSL http://127.0.0.1:5000/v1/images/0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547/layer > 0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547.tar.gz [alexh:~/work] curl -sSL http://127.0.0.1:5000/v1/images/5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1/layer > 5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1.tar.gz [alexh:~/work] curl -sSL http://127.0.0.1:5000/v1/images/8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824/layer > 8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824.tar.gz [alexh:~/work] curl -sSL http://127.0.0.1:5000/v1/images/5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73/layer > 5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73.tar.gz v1 on Docker Hub The Docker Hub currently implements the v1 API, but requires an authentication token for certain operations. It also allows multiple endpoints to be returned by the server. We'll take the simple approach of always using the first endpoint: [alexh:~/work] export endpoint=`curl -sSL -o /dev/null -D- "https://index.docker.io/v1/repositories/$image/images" | awk '/X-Docker-Endpoints/{print $2}' | tr -d '\r' | sed 's/,//'` [alexh:~/work] echo $endpoint registry-1.docker.io [alexh:~/work] export token=`curl -sSL -o /dev/null -D- -H 'X-Docker-Token: true' "https://index.docker.io/v1/repositories/$image/images" | tr -d '\r' | awk '/X-Docker-Token/{print $2}'` The token needs to be used for authentication for the rest of the commands, but otherwise they are the same as the v1 private registry: [alexh:~/work] export v1_image_id=`curl -s -H "Authorization: Token $token" https://$endpoint/v1/repositories/library/$image/tags/$tag | sed 's/"//g'` [alexh:~/work] curl -sSL -H "Authorization: Token $token" "https://registry-1.docker.io/v1/images/$v1_image_id/ancestry" | python -m json.tool [ "0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547", "5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1", "8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824", "5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73" ] [alexh:~/work] curl -sSL -H "Authorization: Token $token" https://$endpoint/v1/images/0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547/layer > 0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547.tar.gz [alexh:~/work] curl -sSL -H "Authorization: Token $token" https://$endpoint/v1/images/5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1/layer > 5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1.tar.gz [alexh:~/work] curl -sSL -H "Authorization: Token $token" https://$endpoint/v1/images/8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824/layer > 8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824.tar.gz [alexh:~/work] curl -sSL -H "Authorization: Token $token" https://$endpoint/v1/images/5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73/layer > 5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73.tar.gz v2 API The v2 API works with manifest files that include checksums. It's also slightly simpler. A manifest file for a tag contains all of the layer information, rather than requiring an image ID to be looked up for a tag, and then the ancestry for that image to be looked up. [alexh:~/work] curl -sSL http://127.0.0.1:6000/v2/$image/manifests/$tag | python -c 'import sys, json, pprint; pprint.pprint(json.load(sys.stdin)["fsLayers"])' [{u'blobSum': u'sha256:a3ed95caeb02ffe68cdd9fd84406680ae93d633cb16422d00e8a7c22955b46d4'}, {u'blobSum': u'sha256:a3ed95caeb02ffe68cdd9fd84406680ae93d633cb16422d00e8a7c22955b46d4'}, {u'blobSum': u'sha256:d4d342aa9da086ca4b7f7273858072e81021f4379c486223bc4708df6862b55d'}, {u'blobSum': u'sha256:23dc26e1038ae691b1a7e8e0152f974a358c42c929104c18c8e20b6d363c41ca'}, {u'blobSum': u'sha256:7772c716a45a828e124d20bc67199e77f2e63fb62589d0046f974f99b406e107'}] [alexh:~/work] curl -sSL http://127.0.0.1:6000/v2/$image/blobs/sha256:a3ed95caeb02ffe68cdd9fd84406680ae93d633cb16422d00e8a7c22955b46d4 > a3ed95caeb02ffe68cdd9fd84406680ae93d633cb16422d00e8a7c22955b46d4.tar.gz [alexh:~/work] curl -sSL http://127.0.0.1:6000/v2/$image/blobs/sha256:d4d342aa9da086ca4b7f7273858072e81021f4379c486223bc4708df6862b55d > d4d342aa9da086ca4b7f7273858072e81021f4379c486223bc4708df6862b55d.tar.gz [alexh:~/work] curl -sSL http://127.0.0.1:6000/v2/$image/blobs/sha256:23dc26e1038ae691b1a7e8e0152f974a358c42c929104c18c8e20b6d363c41ca > 23dc26e1038ae691b1a7e8e0152f974a358c42c929104c18c8e20b6d363c41ca.tar.gz [alexh:~/work] curl -sSL http://127.0.0.1:6000/v2/$image/blobs/sha256:7772c716a45a828e124d20bc67199e77f2e63fb62589d0046f974f99b406e107 > 7772c716a45a828e124d20bc67199e77f2e63fb62589d0046f974f99b406e107.tar.gz We can get the checksum for these files to verify that they are what is described in the manifest file: [alexh:~/work] sha256sum *.tar.gz a3ed95caeb02ffe68cdd9fd84406680ae93d633cb16422d00e8a7c22955b46d4 a3ed95caeb02ffe68cdd9fd84406680ae93d633cb16422d00e8a7c22955b46d4.tar.gz d4d342aa9da086ca4b7f7273858072e81021f4379c486223bc4708df6862b55d d4d342aa9da086ca4b7f7273858072e81021f4379c486223bc4708df6862b55d.tar.gz 23dc26e1038ae691b1a7e8e0152f974a358c42c929104c18c8e20b6d363c41ca 23dc26e1038ae691b1a7e8e0152f974a358c42c929104c18c8e20b6d363c41ca.tar.gz 7772c716a45a828e124d20bc67199e77f2e63fb62589d0046f974f99b406e107 7772c716a45a828e124d20bc67199e77f2e63fb62589d0046f974f99b406e107.tar.gz The Remote (daemon) API Another API that is available is the Docker daemon running locally. It can be accessed over a Unix socket, or over TCP if the daemon is configured to allow it. [alexh:~/work] echo -e "GET /images/json HTTP/1.0\r\n" | nc -U /var/run/docker.sock | tail -n +6 | python -m json.tool [ { "Created": 1433116930, "Id": "0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547", "Labels": {}, "ParentId": "5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1", "RepoDigests": [], "RepoTags": [ "127.0.0.1:6000/ubuntu:15.10", "ubuntu:15.10", "127.0.0.1:5000/ubuntu:15.10" ], "Size": 0, "VirtualSize": 132392276 }, { "Created": 1432704049, "Id": "0c5e5ef1d7dac23c7164ea48faafc79f0c921f6cf87d2d8ea7469832ea31e4ca", "Labels": {}, "ParentId": "136beb445cfa7f48dbe4e36a80a83d4b7945682827fd8bfb1510ac17b6a200c0", "RepoDigests": [], "RepoTags": [ "registry:2.0.1" ], "Size": 0, "VirtualSize": 548626543 }, { "Created": 1432703977, "Id": "4e698fa804417b34b334793bab8a143403be9384e0651067b0c3933fe8d90eb2", "Labels": {}, "ParentId": "0cd49aa0e23cfe176cbea4bf622d552a6f16b21965cf52d633f8c9e27438f52c", "RepoDigests": [], "RepoTags": [ "registry:0.9.1" ], "Size": 0, "VirtualSize": 413940033 } ] A tarball containing all of the layers for a tag can be generated: [alexh:~/work] echo -e "GET /images/get?names=$image:$tag HTTP/1.0\r\n" | nc -U /var/run/docker.sock | tail -n +5 > $image-$tag.tar [alexh:~/work] mkdir tmp [alexh:~/work] tar -C tmp -xf ubuntu-15.10.tar [alexh:~/work] ls -l tmp total 20 drwxr-xr-x 2 alexh alexh 4096 Jun 2 15:33 0fe5a10d2cf8cdb378a39a81d87b0c8fcfa8fcaaf11bba895a1b6f72baf9a547 drwxr-xr-x 2 alexh alexh 4096 Jun 2 15:33 5c1d0c04c3b846fffd1d70886c956927a5c5f6a1c96f5e9f61c02f2ec1a45a73 drwxr-xr-x 2 alexh alexh 4096 Jun 2 15:33 5fc05c0feaeab977e52b7c2490bffacaba0e3d58e7955b683f271041d3558ad1 drwxr-xr-x 2 alexh alexh 4096 Jun 2 15:33 8c63e4ac9a5f31e482d25a149b022209653b5948cb4f045c2ede9331a18e5824 -rw-r--r-- 1 alexh alexh 87 Jun 2 15:33 repositories Conclusions Docker is a great technology and there are a lot of improvements and new features coming out at a rapid pace. Fortunately it's well documented and discussions about bugs are in the open on GitHub. However, there are still some edge cases to be aware of when talking to the Docker APIs. With some good design choices, your applications can be made backwards and forwards compatible, and will be able to use a wide range of Docker client versions and remote APIs.

CoreOS Linux is the operating system for “Super Massive Deployments”. We wanted to see how easily we can get CoreOS logs into Elasticsearch / ELK-powered centralized logging service. Here’s how to get your CoreOS logs into ELK in about 5 minutes, give or take. If you’re familiar with CoreOS and Logsene, you can grab CoreOS/Logsene config files from Github. Here’s an example Kibana Dashboard you can get in the end: CoreOS Kibana Dashboard CoreOS is based on the following: Docker and rkt for containers systemd for startup scripts, and restarting services automatically etcd as centralized configuration key/value store fleetd to distribute services over all machines in the cluster. Yum. journald to manage logs. Another yum. Amazingly, with CoreOS managing a cluster feels a lot like managing a single machine! We’ve come a long way since ENIAC! There’s one thing people notice when working with CoreOS – the repetitive inspection of local or remote logs using “journalctl -M machine-N -f | grep something“. It’s great to have easy access to logs from all machines in the cluster, but … grep? Really? Could this be done better? Of course, it’s 2015! Here is a quick example that shows how to centralize logging with CoreOS with just a few commands. The idea is to forward the output of “journalctl -o short” to Logsene‘s Syslog Receiver and take advantage of all its functionality – log searching, alerting, anomaly detection, integrated Kibana, even correlation of logs with Docker performance metrics — hey, why not, it’s all available right there, so we may as well make use of it all! Let’s get started! Preparation: 1) Get a list of IP addresses of your CoreOS machines fleetctl list-machines 2) Create a new Logsene App (here) 3) Change the Logsene App Settings, and authorize the CoreOS host IP Addresses from step 1) (here’s how/where) Congratulations – you just made it possible for your CoreOS machines to ship their logs to your new Logsene app! Test it by running the following on any of your CoreOS machines: journalctl -o short -f | ncat --ssl logsene-receiver-syslog.sematext.com 10514 …and check if the logs arrive in Logsene (here). If they don’t, yell at us @sematext – there’s nothing better than public shaming on Twitter to get us to fix things. :) Create a fleet unit file called logsene.service [Unit] Description=Logsene Log Forwarder [Service] Restart=always RestartSec=10s ExecStartPre=/bin/sh -c "if [ -n \"$(etcdctl get /sematext.com/logsene/`hostname`/lastlog)\" ]; then echo \"Value Exists: /sematext.com/logsene/`hostname`/lastlog $(etcdctl get /sematext.com/logsene/`hostname`/lastlog)\"; else etcdctl set /sematext.com/logsene/`hostname`/lastlog\"`date +\"%Y-%%m-%d %%H:%M:%S\"`\"; true; fi" ExecStart=/bin/sh -c "journalctl --since \"$(etcdctl get /sematext.com/logsene/`hostname`/lastlog)\" -o short -f | ncat --ssl logsene-receiver-syslog.sematext.com 10514" ExecStopPost=/bin/sh -c "export D=\"`date +\"%Y-%%m-%%d %%H:%M:%S\"`\"; /bin/etcdctl set /sematext.com/logsene/$(hostname)/lastlog \"$D\"" [Install] WantedBy=multi-user.target [X-Fleet] Global=true Activate cluster-wide logging to Logsene with fleet To start logging to Logsene from all machines activate logsene.service: fleetctl load logsene.service fleetctl start logsene.service There. That’s all there is to it! Hope this worked for you! At this point all your CoreOS logs should be going to Logsene. Now you have a central place to see all your CoreOS logs. If you want to send your app logs to Logsene, you can do that, too — anything that can send logs via Syslog or to Elasticsearch can also ship logs to Logsene. If you want some Docker containers & host monitoring to go with your CoreOS logs, just pull spm-agent-docker from Docker Registry. Enjoy!

I have just recorded a 5 minute video that demonstrates running an out of stock example from Apache Camel release, the camel-example-servlet packaged as a docker container and running on a kubernetes platform, such as openshift 3. camel-servlet-example scaled up to 3 running containers (pods) which is easy with kubernetes and fabric8 In this video I have already deployed the example and then demonstrates how we can use the fabric8 web console to manage our application. And also connect to the running container and see inside, such as the Camel routes visually as shown above. Then I run a simple bash script from my laptop that sends a HTTP GET to the Camel example and prints the response. The script runs in a endless loop and demonstrates how kubernetes can easily scale up and down multiple Camel containers and load balance across the running containers. And at the end its even self healing when I force killing docker containers. So I suggest to grab a fresh cup of tea or coffee and sit back and play the 5 minutes video. The video is hosted on vimeo and can be seen from this link.

Docker deployments can be very dynamic with containers being started and stopped, moved around the YARN or Mesos-managed clusters, having very short life spans (the so-called pets) or long uptimes (aka cattle). Getting insight into the current and historical state of such clusters goes beyond collecting container performance metrics and sending alert notifications. If a container dies or gets paused, for example, you may want to know about it, right? Or maybe you’d want to be able to see that a container went belly up in retrospect when troubleshooting, wouldn’t you? Just two weeks ago we added Docker Monitoring (docker image is right here for your pulling pleasure) to SPM. We didn’t stop there — we’ve now expanded SPM’s Docker support by adding Docker Event collection, charting, and correlation. Every time a container is created or destroyed, started, stopped, or when it dies, spm-agent-docker captures the appropriate event so you can later see what happened where and when, correlate it with metrics, alerts, anomalies — all of which are captured in SPM — or with any other information you have at your disposal. The functionality and the value this brings should be pretty obvious from the annotated screenshot below. Like this post? Please tweet about Docker Events and Docker Metrics Monitoring Know somebody who’d find this post useful? Please let them know… Here’s the list of Docker events SPM Docker monitoring agent currently captures: Version Information on Startup: server-info – created by spm-agent framework with node.js and OS version info on startup docker-info – Docker Version, API Version, Kernel Version on startup Docker Status Events: Container Lifecycle Events like create, exec_create, destroy, export Container Runtime Events like die, exec_start, kill, oom, pause, restart, start, stop, unpause Every time a Docker container emits one of these events spm-agent-docker will capture it in real-time, ship it over to SPM, and you’ll be able to see it as shown in the above screenshot. Oh, and if you’re running CoreOS, you may also want to see how to index CoreOS logs into ELK/Logsene. Why? Because then you can have not only metrics and container events in one place, but also all container and application logs, too! If you’re using Docker, we hope you find this useful! Anything else you’d like us to add to SPM (for Docker or anyother integration)? Leave a comment, ping @sematext, or send us email – tell us what you’d like to get for early Christmas!

I have project where I need to output some reports as CSV-files. I found a good library called CsvHelper from NuGet and it works perfect for me. After some playing with it I was able to generate CSV-files that were shown correctly in Excel. Here is some sample code and also extensions that make it easier to work with DataTables. Simple report Here’s the simple fragment of code that illustrates how to use CsvHelper. using (var writer = new StreamWriter(Response.OutputStream)) using (var csvWriter = new CsvWriter(writer)) { csvWriter.Configuration.Delimiter = ";"; csvWriter.WriteField("Task No"); csvWriter.WriteField("Customer"); csvWriter.WriteField("Title"); csvWriter.WriteField("Manager"); csvWriter.NextRecord(); foreach (var project in data) { csvWriter.WriteField(project.Code); csvWriter.WriteField(project.CustomerName); csvWriter.WriteField(project.Name); csvWriter.WriteField(project.ProjectManagerName); csvWriter.NextRecord(); } } Of course, you can use other methods to output whole object or object list with one shot. I just needed here custom headers that doesn’t match property names 1:1. Generic helper for DataTable Some of my projects come from service layer as DataTable. I don’t want to add new models or Data Transfer Objects (DTO) with no good reason and DataTable is actually flexible enough if you need to add new fields to report and you want to do it fast. As DataTables are not supported by default (yet?), I wrote simple extension methods that work on DataTable views. When called on DataTable it selects default view automatically. The idea is – you can set filter on default data view and leave out the rows you don’t need. If you just want to show DataTable to screen as table then check out my posting Simple view to display contents of DataTable. public static class CsvHelperExtensions { public static void WriteDataTable(this CsvWriter csvWriter, DataTable table) { WriteDataView(csvWriter, table.DefaultView); } public static void WriteDataView(this CsvWriter csvWriter, DataView view) { foreach (DataColumn col in view.Table.Columns) { csvWriter.WriteField(col.ColumnName); } csvWriter.NextRecord(); foreach (DataRowView row in view) { foreach (DataColumn col in view.Table.Columns) { csvWriter.WriteField(row[col.ColumnName]); } csvWriter.NextRecord(); } } } And here is simple MVC controller action that gets data as DataTable and returns it as CSV-file. The result is CSV-file that opens correctly in Excel. [HttpPost] public void ExportIncomesReport() { var data = // Get DataTable here Response.ContentType = "text/csv"; Response.AddHeader("Content-disposition", "attachment;filename=IncomesReport.csv"); var preamble = Encoding.UTF8.GetPreamble(); Response.OutputStream.Write(preamble, 0, preamble.Length); using (var writer = new StreamWriter(Response.OutputStream)) using (var csvWriter = new CsvWriter(writer)) { csvWriter.Configuration.Delimiter = ";"; csvWriter.WriteDataTable(data); } } One thing to notice – with CsvHelper we have full control over a stream where we write data and this way we can write more performant code. Related Posts .Net Framework 4.0: string.IsNullOrWhiteSpace() method Exporting GridView Data to Excel Code Contracts: Hiding ContractException How to dump object properties My object to object mapper source released The post Generating CSV-files on .NET appeared first on Gunnar Peipman - Programming Blog.

Last week’s Gartner IT Operations Strategies & Solutions Summit in Orlando, Fla., was exactly what you’d expect—a place to talk about the IT operations issues impacting some of the largest companies in the world. Even so, there were a few interesting surprises. Among them: 1. Bi-modal is big. Not everyone will succeed. Gartner continued to tell its customers to employ two modes of IT—a traditional, slower moving capability for older, typically internal systems of record; and a high-speed, experimental one for new, typically customer-facing Web and mobile apps. “This is a time of experimentation and innovation,” said Gartner VP and distinguished analyst Chris Howard in his opening keynote. Organizations can’t ignore that there are multiple speeds and they should participate in all. Gartner managing VPRonni Colville added that by 2017, 75% of IT orgs will have this “bi-modal” IT capability. See also: Bi-Modal IT: Gartner Endorses Both Disruptive and Conservative Approaches to Technology However, “50% will make a mess of it,” Colville said. Why? Not necessarily because of technology failings, but more often because of a lack of people skills. 2. IT success is all about people. Donna Scott, also a Gartner VP and distinguished analyst, told her keynote audience that “you will be judged on agility, speed, and innovation.” However, the biggest problems Gartner sees for infrastructure and operations team engagement and innovation are lack of time, company culture that’s not conducive to these approaches, and a lack of business skills in IT. More than half of the people responding to an in-room poll said “people” are the part of IT ops that must change first. Not technology. Gartner research director George Spafford underscored similar issues in large organizations trying to use DevOps at scale: people and “human factors” are the biggest concerns from his in-room poll. All these probably contributed to hiring best-selling author Daniel Pink as a keynote speaker on the opening day of the conference. His focus? Not IT or architecture. Instead, he pounded home the importance of influencing people and selling internally. 3. Big orgs are trying DevOps. But the issues are different at scale. In numerous sessions I saw many hands go up when analysts asked, “Who here is trying DevOps?” Clearly, the approach is getting traction in large companies. But there’s lots of learning still to do. In fact, that was Spafford’s biggest bit of advice. “Always be learning,” he said, “trying to see what works and what breaks, especially at scale.” And, even once you’ve had some initial success, keep learning. “If you’ve done ‪DevOps, stay humble,” he advised. 4. Looking to innovative organizations for ideas … analytics on the rise. Many sessions addressed how large organizations are taking on ideas fostered by smaller, more risk-tolerant companies, and offered advice for doing so successfully. In addition to multiple discussions of DevOps, an entire session was devoted to establishing your own “Genius Bar®—a “walk-up IT support center” as explained in this CIO article. As at previous conferences, Gartner research VP Cameron Haight ran several sessions on lessons learned from firms running massive, Web-scale IT systems. “You need lots of data … and access to it inexpensively,” he said. Some commercial monitoring companies (New Relic included!) got a shout out for taking the lessons of Web scale IT to heart in their offerings. In addition, Haight said, “Analytics are increasingly important for application performance monitoring given the huge amount of data now available.” 5. Cloud: Enterprises want it, but aren’t very good at it yet. Gartner research director Dennis Smith talked through the enterprise’s interest in cloud computing. A huge majority of his in-room poll wanted some mix of both public and private cloud, while only 9% wanted to use only a private cloud environment and a measly 4% were looking to move entirely to the public cloud. The most popular choice (41%) was an 80/20 split between private and public cloud infrastructure. “Enterprises don’t make the dean’s list,” for cloud usage, Smith said, earning no more than a C average in his opinion. Large organizations are doing well at visibility, governance, and delivering standardized stacks, he said, but are less skilled at optimizing for these new environments. Still, Smith said the trends point toward enterprises improving on all fronts. 6. Cloud security can be better than yours. Importantly, Gartner VP and distinguished analyst Neil MacDonald gave the cloud a vote of confidence: noting that, for a variety of reasons, “Well-managed public cloud can be more secure than your own data center.” For example, on-premise software can pose serious security risks, he said, because of “deployment lag” where customers are stuck using software releases with unpatched security vulnerabilities. With a cloud-based Software-as-a-Service (SaaS), security updates can be more quickly rolled out to all customers. But cloud security can be different, requiring a shift to information-level security from OS-level security. Best practices include doing away with a huge pool of all-powerful sysadmins in favor of JEA, or “just enough administration,” where sysadmins have just enough privileges to do their job, and no more. An analogous security practice for compute resources is “least privilege,” where apps and microservices can’t talk to each other unless they specifically need to do so. Audience polling supported MacDonald’s optimistic view of cloud security, which suggests that large enterprises may struggle less with their cloud policies moving forward. 7. Containers: Try ’em! Ahead of this week’s DockerCon in San Francisco, Gartner devoted significant airtime to educating the audience on containers and microservices. My summary of ‪Gartner VP and distinguished analyst Tom Bittman’s advice on containers was simple: Try ’em. Now. Complement them with VMs. ‪And Docker (the company) is important, but not the be-all and end-all in this space. Bittman (copping to some deja vu from Gartner presentations he made on server virtualization 13 years ago) noted that while virtualization has been focused on admin and ops functions, containers are focused on value for developers. But because containers are well suited for driving up VM utilization for workloads that share the same OS, we can expect to see more combinations of containers and server virtualization. Finally, Bittman underscored that Gartner doesn’t see containers having much impact on premise, but making a huge difference in the cloud. That doesn’t necessarily fit with what’s been shown in other research, such as this 2015 State of Containers Survey sponsored by VMblog.com and StackEngine, so we’ll want to watch how this plays out. This is all a lot to digest. The Gartner IT Operations Strategies & Solutions Summitacknowledges the importance of dealing with existing IT systems and practices as well as promising new technologies and thinking, and tries to point a way forward. In fact, Haight had a very good quote about microservices that I thought also served to wrap up the entire event: “If you want to run with the big dogs, you need to rethink application architecture,” he said. That can be very difficult for an enterprise to fully implement … but also very appealing. Note: Al Sargent contributed to this post. All product and company names herein may be trademarks of their registered owners. Server, tortoise and hare, business team, and cloud security images courtesy ofShutterstock.com.

New Integration Provides Seamless Connections Between Perforce Helix and Leading Application Lifecycle Management Systems WOKINGHAM, UK. (June 24, 2015) – Perforce Software, the leader in software configuration management (SCM) and collaboration, and Go2Group, an Atlassian Platinum and Enterprise Expert, today announced the Perforce ConnectALL Adapter. The new adapter for Go2Group’s ConnectALL ALM Router connects Perforce Helix to Application Lifecycle Management (ALM) systems supported by ConnectALL. The companies also announced that they have expanded their partnership, which first began in 2002. “Very few SCMs can handle binary data, and no other SCM solution supports large file formats that scale across globally distributed enterprises like Helix,” said Brett Taylor, president of Go2Group. “Our customers demand future-proof solutions, and with Perforce we know they don’t have to worry about outgrowing their systems—it will serve them well whether they’re a team of 50 or 50,000.” With the Perforce adapter, ConnectALL automatically synchronises data and workflow with other ALM systems and integrates ALM systems components within minutes. “We’re excited to be a part of the ConnectALL ecosystem of adapters and to enable companies to more easily design, configure, synchronise, manage, and monitor their integrations with Perforce,” said Dave Robertson, vice president of Channels at Perforce. “We’re glad to extend our partnership with Go2Group to new technologies and markets.” Go2Group is part of Perforce’s network of sales partners across Europe, the Middle East, Africa, Asia Pacific and India. Perforce partners serve customers in more than 100 countries worldwide. The Perforce ConnectALL Adapter is available for purchase from the Go2Group website.